KymcoForum.com

Scooters - 50cc => zx50 => Topic started by: jambobting on December 23, 2009, 12:48:25 AM

Title: zx50 panels
Post by: jambobting on December 23, 2009, 12:48:25 AM

 :( need  a front fairing for zx50 plz help

Title: Re: zx50 panels
Post by: zombie on December 23, 2009, 05:06:07 AM

What part do you need? the whole faring? If you have MOST of it I can fix it for you! I do fiberglass fab for a living, There is no charge for forum members as far as I am Concerned. Just pay for materials, and shipping. I normally charge 40. bucks @hr to fix boat stuff, but will adjust that to take care of scoot buds. Need a custom piece? I will also give a kick back to any referrals. How do I stay in business you may ask... VOLUME! (remember Crazy Eddie?) Serious though, I can fix what you need. Pm my email...

Title: Re: zx50 panels
Post by: wordslinger on December 30, 2009, 02:20:02 AM

...i need a front handlebar faring for my A50...some asshole tipped it over at work and split it down the center...

..also busted mt right-hand handlebar cap...

Title: Re: zx50 panels
Post by: zombie on December 30, 2009, 04:02:07 AM

If you want to Pm me for the address, I can fix it/ color shoot it, and send it back in 3-4 days. Shipping might cost 15 bucks round trip, and maybe 20 bucks for materials. A little epoxy glass, and filler for the repair. I use All Grip, Nason, or Imeron, for finish coat with All Grip epoxy primer for all three.

Title: Re: zx50 panels
Post by: wordslinger on December 30, 2009, 04:06:43 AM

Quote from: zombie on December 30, 2009, 04:02:07 AM

If you want to Pm me for the address, I can fix it/ color shoot it, and send it back in 3-4 days. Shipping might cost 15 bucks round trip, and maybe 20 bucks for materials. A little epoxy glass, and filler for the repair. I use All Grip, Nason, or Imeron, for finish coat with All Grip epoxy primer for all three.

..imma take a cpl pics 2morro and send them to you...see what you think...

..i have a cpl scratches here and there, which I can live with...but this is right up front....i'm afraid that it'll leak water into my electricals as I ride in the rain when I must....

Title: Re: zx50 panels
Post by: zombie on December 30, 2009, 04:36:42 AM

When I mix paint there is always a little extra that goes home with the customer for touch-ups.

Title: Re: zx50 panels
Post by: wordslinger on December 30, 2009, 04:39:48 AM

...it's all burnt black brother....


..stealth is the word....

..umm..when all the lights are off, anywayss..lol..

Title: Re: zx50 panels
Post by: zombie on December 30, 2009, 04:53:52 AM

Easy Enough !

Title: Re: zx50 panels
Post by: wordslinger on December 31, 2009, 02:07:06 AM

Quote from: zombie on December 23, 2009, 05:06:07 AM

What part do you need? the whole faring? If you have MOST of it I can fix it for you! I do fiberglass fab for a living, There is no charge for forum members as far as I am Concerned. Just pay for materials, and shipping. I normally charge 40. bucks @hr to fix boat stuff, but will adjust that to take care of scoot buds. Need a custom piece? I will also give a kick back to any referrals. How do I stay in business you may ask... VOLUME! (remember Crazy Eddie?) Serious though, I can fix what you need. Pm my email...

..dude...can you make my handlebar fairing look something like this  :P
..huh??...can ya??

Title: Re: zx50 panels
Post by: zombie on December 31, 2009, 02:52:08 AM

I can make anything you want! Is that what yours is like? If it custom it will take a few extra days due to molding, and raw glassing needs extra grinding/sanding. If that is "based" on your original it shouldn't be too bad.