KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: merchjo on July 20, 2015, 02:01:56 AM

Title: Dr. Pulley sliders
Post by: merchjo on July 20, 2015, 02:01:56 AM

Hi Guys

I see a number of you recommend 7g Dr. Pulley sliders for a agility 50 but I can not find the dimension you used.  When I look up Dr. Pulley sliders they are listed as 15x12 or 16x13 etc but I dont just find 7 gram.  Can someone help?

Thanks
Joe

Title: Re: Dr. Pulley sliders
Post by: blue on July 21, 2015, 12:33:52 AM

you want the 13 x16 and if you want better take off go with 5gm or 5,5

Title: Re: Dr. Pulley sliders
Post by: Smithg27 on July 21, 2015, 05:36:34 PM

Blue is correct with size. I have 5.5g and they do provide GREAT takeoff, but there seemed to be a little left off of the top end. The 6g should still provide good takeoff but should be able to finish out that top end as well.  8)

Title: Re: Dr. Pulley sliders
Post by: Cokym on July 27, 2015, 05:53:18 AM

I am using the chinese knock-off sliders and found out with testing that 7g sliders go best with the koso race variator.