KymcoForum.com

General => Technical | How To => Topic started by: doultry on July 17, 2015, 10:39:03 PM

Title: agility city 50 non start
Post by: doultry on July 17, 2015, 10:39:03 PM

Hey guys newbie here thanks for taking the time to read, any help is much appreciated! My agility is having trouble starting.
 What Iknow:
- battery is fubar.
-starter turns when powered independantly.
-fuses ok.
-new coil and lead on order just as a precaution.

what I'dreally like to know is if after i put this new battery coil and lead with cap on, and it still has no electrics, how would I go about testing the cdi module to see if that is the fault? Thanks again in advanc guys !!!!

Title: Re: agility city 50 non start
Post by: blue on July 18, 2015, 05:29:33 PM

if the scoot turns over it most likely is not the cdi.maybe a valve check. or maybe the plug wire is not staying on tight.

Title: Re: agility city 50 non start
Post by: scooterdad2324 on July 19, 2015, 02:28:44 AM

Maybe take your cdi off and clean the contacts that will help too

Sent from my XT1526 using Tapatalk