KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: scooterdad2324 on June 30, 2015, 02:30:38 PM
-
I have drilled 6 one inch holes in my exhaust like I had heard. Do I need to drill anymore or should that be plenty for my agility 50cc
Sent from my XT1526 using Tapatalk
-
I have drilled 6 one inch holes in my exhaust like I had heard. Do I need to drill anymore or should that be plenty for my agility 50cc
Sent from my XT1526 using Tapatalk
Also I need to change the oil. Where's the drain plug located ? I know this sounds dumb but I can't seem to locate it. Help
Sent from my XT1526 using Tapatalk
-
Try the big shiny bolt on the bottom left rear? I was going to change my wife's for the first time but it's been raining & haven't had a chance to get it up to temp.
Did I see that you own a 2011? If so I'm curious how many wires it uses on the CDI plugs? My 2013 uses only four & I couldn't find a derestricted CDI that works on it, blows the fuse as soon as I hit the start button.
-
Try the big shiny bolt on the bottom left rear? I was going to change my wife's for the first time but it's been raining & haven't had a chance to get it up to temp.
Did I see that you own a 2011? If so I'm curious how many wires it uses on the CDI plugs? My 2013 uses only four & I couldn't find a derestricted CDI that works on it, blows the fuse as soon as I hit the start button.
OK thanks and its a 2011 and it has a four plug factory cdi box. I cut into it on the end with a hacksaw and it is now derestricted. I'm so glad I looked it up on YouTube. Maybe you should give that a try
Sent from my XT1526 using Tapatalk
-
OK thanks and its a 2011 and it has a four plug factory cdi box. I cut into it on the end with a hacksaw and it is now derestricted. I'm so glad I looked it up on YouTube. Maybe you should give that a try
Sent from my XT1526 using Tapatalk
Four wires I mean. Sorry [emoji1]
Sent from my XT1526 using Tapatalk
-
I'm not seeing a big shiny bolt for the oil drain plug? Any other ideas
Sent from my XT1526 using Tapatalk
-
Google is your friend. "Agility 50 oil drain" should yield some useful info.
Sent from my SM-G900V using Tapatalk
-
Google is your friend. "Agility 50 oil drain" should yield some useful info.
Sent from my SM-G900V using Tapatalk
Thanks I appreciate it
Sent from my XT1526 using Tapatalk
-
Got bigger problems now. My spark plug wire and coil are screwed up. Trying to get the new part tomorrow so hopefully that fixes my problem. Wish me luck. Scooter broken down and sucks
Sent from my XT1526 using Tapatalk
-
Just changed oil for the first time & the drain is also the oil screen on the bottom right side. Thanks for the info on the CDI wires.
-
Just changed oil for the first time & the drain is also the oil screen on the bottom right side. Thanks for the info on the CDI wires.
Good deal and your welcome. Changed the coil and plug wire and now the scooter is back on the road thank goodness. Time for me to try and change the oil next. Wish me luck. Lol
Sent from my XT1526 using Tapatalk
-
Just changed oil for the first time & the drain is also the oil screen on the bottom right side. Thanks for the info on the CDI wires.
And thanks for the info about the oil plug. I appreciate your help
Sent from my XT1526 using Tapatalk
-
Now with the new coil and wire it seems to be a lot slower now for some reason. Oh well its raining here so maybe I can pittle with it tomorrow and figure it out. Wish me luck. Lol
Sent from my XT1526 using Tapatalk
-
Page 40 of the owner's manual:
I downloaded and printed a copy of this to keep in my saddle box. I strongly recommend this.
http://www.kymcousa.com/owners/onroad/Agility50-125.pdf (http://www.kymcousa.com/owners/onroad/Agility50-125.pdf)
Also I need to change the oil. Where's the drain plug located ? I know this sounds dumb but I can't seem to locate it. Help
Sent from my XT1526 using Tapatalk