KymcoForum.com
General => General Discussion => Topic started by: Stig / Major Tom on June 26, 2015, 12:48:41 PM
-
Hope this is an accurate chart.....
Putting it in what I think might be the most viewed area of our forum - for those interested.
(for my scooter - a 200i LIKE, 13.5 gm Dr Pulley sliders do not seem to be avail. in the States - don't have these "half sizes")
Stig
http://beedspeed.com/html-pages/variator-roller-weights-chart.htm (http://beedspeed.com/html-pages/variator-roller-weights-chart.htm)
-
Thanks, Stig! Some models seem to be absent in spite of huge compilation.
Karl
-
I think the missing bikes are out of production.
Great find!
-
I just bought 18 x 14 13.5 gram Dr. Pulley sliders on Amazon.
-
Got 2 sets from b&w and they where the best 30 bucks spent.
To get middle weights you need to mix 12 with 13... so you get both sets and mix.
In a like 125 used 13g (stock was 13.5)
-
Undo what you did there Beermak.
Never mix roller/slider weights UNLESS it is for testing purposes-es only.
There are several threads (hundreds) about this. The heavy weights do all the work, and take a beating while the lighter weights are free to "float around".
Best bet is to buy a dram scale, and drill/dremel out the heavy weights to the size you need.
-
Didnt know that!! I thought it was ok to mix them... good info learned! Thanks :)
-
No Kymco 300's?
-
A million thanks for the chart, Stig.
-
That's a nice compilation, but I don't see any model year beyond 2010.
-
That's a nice compilation, but I don't see any model year beyond 2010.
The guy probably died compiling it.
-
Ditto MJR LOL
-
Nice list. Going to pin that one. Thx Stig!