KymcoForum.com

General => General Discussion => Topic started by: 0BARK4322 on November 14, 2009, 01:57:51 PM

Title: 2003 KYMCO SUPER 9 49CC--L/C
Post by: 0BARK4322 on November 14, 2009, 01:57:51 PM

HEY, IS IT EASY TO CHANGE THE BOSS DRIVE ON THESE SCOOTER--I HEAR SOME SAY YOU NEED A AIR IMPACT TOOL TO TAKE IT OFF----CAN A REGULAR WRENCH SET DO THE JOB?

Title: Re: 2003 KYMCO SUPER 9 49CC--L/C
Post by: wordslinger on November 14, 2009, 08:04:19 PM

..I use apair of 10" vise clamps and a block of wood to hold the fly wheel...17mm 1/2" drive socket and ratchet to remove the nut...

..an impact wrench works well, just gotta be careful not to strip the threads...

peace

Title: Re: 2003 KYMCO SUPER 9 49CC--L/C
Post by: 0BARK4322 on November 15, 2009, 05:37:57 PM

THANKS---I HAV DONE THE JOB AND IT WAS NOT THAT BAD--I USED A BOLT AND A RAG TO STOP THE SPROCKET FROM TURNING AND A SOCKET WENCH THAT WORK GREAT SO THE BOSS DRIVE IS CHANGE---WOW WHAT A DIFFERENT

Title: Re: 2003 KYMCO SUPER 9 49CC--L/C
Post by: zombie on November 15, 2009, 11:37:19 PM

Hey obark, Did you post awhile ago about installing Hand Warmers? The scoot looks familiar.

Title: Re: 2003 KYMCO SUPER 9 49CC--L/C
Post by: 0BARK4322 on February 14, 2010, 02:22:16 AM

SOMEBODY MUST HAVE ONE LIKE ME----GREAT  ;D