KymcoForum.com

Offroad => Side By Side => Topic started by: solberglandandcattle on April 14, 2015, 10:04:01 PM

Title: TPS code
Post by: solberglandandcattle on April 14, 2015, 10:04:01 PM

I've started to narrow my no power problem down its running a TPS code, now I ordered a new sensor and put it in, and it's still running the code, anybody have any ideas??

Title: Re: TPS code
Post by: de dee on April 14, 2015, 10:13:24 PM

what kind of scooter do you have , to have tire sensor code read out,. is that part of ABS brakes, 

Title: Re: TPS code
Post by: solberglandandcattle on April 15, 2015, 07:33:54 PM

It's a 2012 500i side by side. I was meanin the throttle position sensor

Title: Re: TPS code
Post by: BettinANDlosing on April 15, 2015, 09:43:30 PM

Could be the ECU itself not picking up the TPS signal. Double check all the wiring too.

Title: Re: TPS code
Post by: carmen007 on April 20, 2015, 06:30:51 PM

Are you getting a 06 code

Title: Re: TPS code
Post by: solberglandandcattle on April 22, 2015, 07:56:57 PM

It's giving me a p1121 code, put a new throttle position sensor in and no change, can't get rid of the code nothin

Title: Re: TPS code
Post by: JoeMarshall on June 01, 2015, 01:11:58 AM

Did you get the code to disappear. and did you do the reset procedure. Also you will need to do the relearn for the tps.