KymcoForum.com

Scooters - 125 to 300 => Grandvista 250 => Topic started by: jayocampo88 on March 29, 2015, 06:16:04 AM

Title: Oil Filter size?
Post by: jayocampo88 on March 29, 2015, 06:16:04 AM

Hey again, I know, I might be getting some of you mad  >:( >:( >:( >:( >:( >:(

And I'm honestly sorry!  :-[ :-[ :-[ :-[ :-[ :-[ :-[ :-[

But, I'd rather make stupid questions than stupid mistakes. So with that in mind...

What is the Oil Filter size or part number???

Thanks in advance guys!

Title: Re: Oil Filter size?
Post by: BettinANDlosing on March 29, 2015, 07:20:29 AM

You're in luck, there is no oil filter!!!

Title: Re: Oil Filter size?
Post by: Rudolf on March 29, 2015, 08:11:01 AM

There is a small strainer the size of a larger thimble, that sits inside the oil drain plug along with a spring underneath the engine.
The code for the oil filter strainer is: 15421-107-0000 and the spring for the oil filter strainer 15426-GE1-9200

Title: Re: Oil Filter size?
Post by: MaryK on March 29, 2015, 11:26:53 PM

You don't need to replace anything except the oil.  1 qt as I remember.
With no filter, I would change oil every 1000 miles.

scoot safely,

Title: Re: Oil Filter size?
Post by: jayocampo88 on March 30, 2015, 03:00:26 PM

Sweetness!!!!
on that note. How difficult is it to change the drive belt and spark plug??

Imma DIY kind of guy you know?

Title: Re: Oil Filter size?
Post by: Stig / Major Tom on March 30, 2015, 08:55:13 PM

Quote from: jayocampo88 on March 30, 2015, 03:00:26 PM

Sweetness!!!!
on that note. How difficult is it to change the drive belt and spark plug??

Imma DIY kind of guy you know?

If you're going to be fiddling with your scooter a lot - (Like me) - you might want to look into buying a manual (on-line, or paper) from www.cyclepedia.com (http://www.cyclepedia.com)
I bought the life-time subscription, and have used it repeatedly with good results.
Pretty sure they list your scoot.
The shop/labor prices of my dealer encouraged me to do a lot of stuff myself. Got all my tools and the manual for about 1 hour labor time.
Stig
Typical picture from the web site of my manual....(http://i57.tinypic.com/2rndd3q.jpg)