KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: MrXT on March 11, 2015, 06:00:58 AM

Title: Missing two screws help!!
Post by: MrXT on March 11, 2015, 06:00:58 AM

Im missing 2 screws in the right switch gear thing

http://www.exportstrength.com/images/kymco_agility_50_right_hand_switch_as.jpg (http://www.exportstrength.com/images/kymco_agility_50_right_hand_switch_as.jpg)

This thing the two screws that hold the 2 halves together have fallen out. I actually have the agility city 125 but im sure it would be the same, so does anyone know exactly what screws i need to replace them with? type of screw including thread size?

Help removing the plastic to get the screws in easier would also help but just identifying exactly what screws i need is priority.

At the moment i just have it ducktaped but that falls off after a short time.

Title: Re: Missing two screws help!!
Post by: Jim Moore on March 12, 2015, 11:24:03 AM

Just go to the local hardware s store and ask them to let you bring a few small bolts outside to find the right fit.

Title: Re: Missing two screws help!!
Post by: MrXT on March 12, 2015, 09:07:15 PM

Quote from: Jim Moore on March 12, 2015, 11:24:03 AM

Just go to the local hardware s store and ask them to let you bring a few small bolts outside to find the right fit.

Iv considered that but I can't get the plastic off and so far testing a few dif screws has resulted in them getting slightly stuck and unsticking them has resulted in each one falling down the steering column and landing in some secret compartment.

Title: Re: Missing two screws help!!
Post by: Jim Moore on March 13, 2015, 12:25:43 PM

Make sure you're using metric screws instead of SAE.