KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: bluescoot125 on January 17, 2015, 11:02:47 PM

Title: Stock bulb replacement agility 125
Post by: bluescoot125 on January 17, 2015, 11:02:47 PM

Is there a higher quality replacement bulb out there to use in place of the stock for agility 125. Something brighter?

Title: Re: Stock bulb replacement agility 125
Post by: 2wheelfun on January 24, 2015, 06:59:51 PM

Let's roll the dice and see which bulb your talking about. OK license plate light pops up. Is that it?

Title: Re: Stock bulb replacement agility 125
Post by: bluescoot125 on March 08, 2015, 09:09:43 PM

Quote from: 2wheelfun on January 24, 2015, 06:59:51 PM

Let's roll the dice and see which bulb your talking about. OK license plate light pops up. Is that it?

sorry forgot to specify. i was asking about the headlight bulb on an agility 125 year:2013

Title: Re: Stock bulb replacement agility 125
Post by: donatello on April 14, 2015, 06:30:37 AM

I would also like to know if anyone could shed some light on this topic. My agility can barely light up 10-15 feet in front of me and driving at night on unfamiliar roads are quite dangerous. I've tried the cheap chinese "xenon" (so they claim) lights on eBay. The light worked and looked great...for the 30 minutes that it worked before eventually blowing out.

Anyone out there know a resource or modification for brighter headlight setups?

Title: Re: Stock bulb replacement agility 125
Post by: robert777 on April 22, 2015, 11:13:05 PM

been using a 6260B eiko bulb (60w- higher wattage), and it works great, lights up the road beautifully- but it kinda melts the plastic housing around the bulb, so working on modifying with a metal insert to protect the housing...

Title: Re: Stock bulb replacement agility 125
Post by: MrXT on April 23, 2015, 12:34:22 AM

Quote from: robert777 on April 22, 2015, 11:13:05 PM

been using a 6260B eiko bulb (higher wattage), and it works great, lights up the road beautifully- but it kinda melts the plastic housing around the bulb, so working on modifying with a metal insert to protect the housing...

You could use some PVA glue and some tin foil and lay it around the inside around the bulb. Just a thought.