KymcoForum.com

Scooters - 125 to 300 => Downtown 300 => Topic started by: curlyearly on December 23, 2014, 11:00:16 PM

Title: Front Dip / Head Lights
Post by: curlyearly on December 23, 2014, 11:00:16 PM

Hi All,

Is there a link to instructions to remove panels to get to the light bulbs. Ive tried removing a few screws but the panels seem still "glued" together. Perhaps there are some helpful photos?

Cheers for any helpful replies.

Title: Re: Front Dip / Head Lights
Post by: windwheeler on December 24, 2014, 03:52:20 AM

I have taken the front off my GrandVista 250, I would guess the D/T300i is similar.  (PS I have had a 300i too, there is a on-line Service manual you can find when you search for it, and also the detailed parts drawings may help you to see where the screws are).

All screws I removed on the G/V were on the driver's side, in this case six in total, plus some windshield screws to make it all come loose.  Maybe this will help you.

Title: Re: Front Dip / Head Lights
Post by: de dee on December 24, 2014, 06:54:46 AM

Quote from: curlyearly on December 23, 2014, 11:00:16 PM

Hi All,

Is there a link to instructions to remove panels to get to the light bulbs. Ive tried removing a few screws but the panels seem still "glued" together. Perhaps there are some helpful photos?

  what light bulbs front or rear   both ends have screws and bolts to take out!

Title: Re: Front Dip / Head Lights
Post by: windwheeler on December 24, 2014, 02:10:38 PM

Hey De Dee, did you want to say anything?  Nothing posted.

Title: Re: Front Dip / Head Lights
Post by: zombie on December 25, 2014, 12:17:53 AM

" what light bulbs front or rear   both ends have screws and bolts to take out!"

It was in the bottom of the quote box...

Dee, You have to go to the end of the quote with your mouse, left click to set the blinky thing, and hit enter twice.

That will take your reply out of the "quote box", and set it below on the page ;)