KymcoForum.com
Scooters - 125 to 300 => People GT 300i => Topic started by: doxbike on December 13, 2014, 11:42:28 PM
-
OK, so I just got a people 300i and trying to adjust the clock (which I got done with no prob), but it says the mode button toggles between odo and trip. Can't seem to get that to work-what am I doing wrong?
-
Oh goodie im the first to view and reply. Kymco flat out lies! There ya go. The other button, you know the adjust button, it change the mode. The mode button is a lie.
-
Oh goodie im the first to view and reply. Kymco flat out lies! There ya go. The other button, you know the adjust button, it change the mode. The mode button is a lie.
OK, I'll try that (thought I did, but guess not)
Thanks
-
I missed out... Get ya next time Neo!
-
You have to hold it for about three seconds. To reset the trip you set it to trip and hold both buttons. Fairly sure you reset the oil light by holding both buttons on the oil service screen.
-
You have to hold it for about three seconds. To reset the trip you set it to trip and hold both buttons. Fairly sure you reset the oil light by holding both buttons on the oil service screen.
Never got it to go to the service screen, only trip and odo came up. will try again-do you just keep holding both, and it automatically scrolls or after holding for a few seconds, do you release and repress or press just one or??
-
Never got it to go to the service screen, only trip and odo came up. will try again-do you just keep holding both, and it automatically scrolls or after holding for a few seconds, do you release and repress or press just one or??
[/quo
On my DT.300i press right side button hold till it changes,. A., B., service ., and Odo. for a, b, service,. hold both buttons till they reset,. the right and left side buttons,. the middle button is dead , marked ( tps. tire pressure )