KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: sportsman014 on October 20, 2009, 01:20:38 AM

Title: starting wires
Post by: sportsman014 on October 20, 2009, 01:20:38 AM: Some one tore the wires out of the ignition solenoid. what is the color codes for where each wire goes?

thank you
Title: Re: starting wires
Post by: Shaka on October 20, 2009, 01:48:51 AM: Those bastards! >:( Here is a pic from the manual, hope it helps!
Title: Re: starting wires
Post by: sportsman014 on October 20, 2009, 03:01:48 AM: that peice is luckly still intact what i am looking for is which wires solder to which spot on the actual ignition area

thanks in advance
Title: Re: starting wires
Post by: Shaka on October 20, 2009, 03:09:01 AM: Got ya, that one is a little trickier! You should be able to take a voltmeter and check continuity between the points while turning the key to the different positions. Here is a diagram of what should be connected.
Title: Re: starting wires
Post by: sportsman014 on October 20, 2009, 03:22:56 AM: ok i dont have a volt meter either... do u know what color wire goes where starting at the top and rotating clockwise..
Title: Re: starting wires
Post by: zombie on October 20, 2009, 03:53:12 AM: Get em shaka!
Title: Re: starting wires
Post by: Shaka on October 20, 2009, 04:39:40 AM: Well, I think i stuck out on solving this one. :P I don't an agility to look at. I do have an ignition off another scoot, but the wires are different. I think you might be best off investing in a volt meter, it's cheaper than a new ignition! ;) Otherwise, maybe someone else can look at theirs and send you a pic.
Title: Re: starting wires
Post by: wordslinger on October 20, 2009, 10:52:39 AM: ...gimme a few minutes...i'll go look at mine...
Title: Re: starting wires
Post by: sportsman014 on October 20, 2009, 01:06:07 PM: thank you
Title: Re: starting wires
Post by: wordslinger on October 20, 2009, 01:57:48 PM: Quote from: sportsman014 on October 20, 2009, 01:20:38 AM
Some one tore the wires out of the ignition solenoid. what is the color codes for where each wire goes?

thank you

..are you wanting the ignition switch connector?

..where you insert the key?
Title: Re: starting wires
Post by: sportsman014 on October 20, 2009, 02:05:01 PM: the back of the key silinoid has 5 wires that attach to it i was wonder what wire goes where
Title: Re: starting wires
Post by: wordslinger on October 20, 2009, 02:42:02 PM: ...ok..i'll get that info for you, but it's gonna be this afternoon before I can get to it...

peace
Title: Re: starting wires
Post by: sportsman014 on October 20, 2009, 03:35:54 PM: got ahold of the shop were i bought the bike and the order is starting at 12 o'clock is Black/white, Black, Green, green, red.
THe green wire at 5o'clock is the one that is right next to the black wire in the terminal..

hopefully this might help someone else down the road.

thanks everyone for the help!!
Title: Re: starting wires
Post by: Shaka on October 20, 2009, 04:26:51 PM: I'm glad you got it figured out!
Title: Re: starting wires
Post by: wordslinger on October 20, 2009, 04:54:51 PM: ..damn lotta good this frickin' electrical schematic I have is...doesn't even show a black/white wire ANYWHERE on the print...
Title: Re: starting wires
Post by: zombie on October 20, 2009, 09:29:12 PM: It's that "translation" thing that makes some manuals worth less than the paper they are printed on. FRUSTRATING!!!
Title: Re: starting wires
Post by: sportsman014 on October 21, 2009, 01:17:42 AM: the black/ white wire didnt go into the terminal it was all by itself in a different connector.. it was a connector similar to the end of an earphone with an open and hollow end. (hope that makes sense)
Title: Re: starting wires
Post by: zombie on October 21, 2009, 02:03:05 AM: There are alot of different applications for the same harness (different scoots) Try following EVERYTHING that makes sense first. If you have extra wires, or open terminals it may not mean you missed something! There MAY be something else preventing the scoot from starting. Do what you can w/ the info you have, and post back. I'm sure you will get it sorted out,
Title: Re: starting wires
Post by: sportsman014 on October 21, 2009, 04:35:14 AM: i got it figured out i was telling everyone how i fixed it!!!!!!!!!

hopefully it helps somebody in the future
Title: Re: starting wires
Post by: zombie on October 21, 2009, 06:41:37 AM: Capieshe sportsman. Thank goodness for... left over wires!
Title: Re: starting wires
Post by: codger78 on October 24, 2009, 01:06:45 PM: If there is a HARBOR FREIGHT store in your area, stop in and get a "volt" meter. Actually it measures just about everything electrical, like ohms (for short circuits), etc., etc., etc.,....be the first one on your block, amaze your friends and family. The price is about five bucks, three or four if its on sale. It's about the size of a pack of cigarettes and will fit into your shirt pocket. It might be a little short on instructions, but you can drop by the library for a short course on how to use it.