KymcoForum.com
Scooters - 125 to 300 => Super 8 150 => Topic started by: manimal on August 20, 2014, 02:37:03 PM
-
Hey All,
Just thought I'd say hello <waves>
I ran across this forum when I was researching scooter models to choose from. I had also browsed different threads within this forum as well.
I just purchased my first scooter over the weekend; a brand spankin new 2013 S8 150 (5 miles on the OD). Started my break in on Sunday, a whole 26 miles (kept speed under 40mph and varied throttle).... lol
Attempted to start my commute to work yesterday (tues) on the scooter, but experienced a mechanical issue; reached speed up to 45mph and motor decided to shut down. Fortunately, traffic was not too heavy and I was able to make it safely to the side of the road. I was able to restart the bike a moment later and then make my way back home. Well, on the way back, the motor shut down a couple more times (both above 40mph), but was able to get the motor started and was able to get home.
I had contacted the dealer and informed him of my experience, and replied that it's quite possible there may be or had some debris / particles in the fuel system that may have contributed to my issue. He said to keep riding it, as it may pass (think of passing kidney stones .... lol). His last comment was if this issue persists, to bring it in. Unfortunately, the dealer is nearly an hour away.
After getting home from work, I removed the trunk to inspect the carb area ... I had read of some carb threads that others had posted. Inspected all the hoses; from carb to air box, and to the gear box. Some hoses looked close to being kinked (near sharp bends), so I made some routing adjustments. I then inspected the carb, intake manifold, boot, and air box. All hardware securely fastened.
Shortly after, I took the scooter out around the block, and seems to run fine, as it did when I kept the speed under 40 mph. I do plan to add more break in miles this weekend, and also take it out to an isolated area (no traffic) and test the waters again ...... to see if I can repeat the issue.
Any how, I thought I would share with you all my experience. Who knows, maybe someone else here had the same experience that I may be able to learn from.
I will keep this thread up to date as to whether or not the issue persists.
Happy riding :)
-
Welcome. Hoping you are enjoying your Super8. If it happens again, I'd make an appointment with the dealer.
-
Thanks Wayne :) Btw, thanks for your contribution to the forum, members, and S8 owners. Your video's have been very helpful and informative. :thumb up
An update .... I began to take it out to put on some more break in miles today. Unfortunately, it happened again (motor shut down), not long after I got onto an open stretch of road and up to a cruising speed (40mph). Long story short, I dropped off the scooter at the dealer (50 min. north of me).
I've been around motorcycles since 91. from my experience and or of others over the years, I suspect vapor lock. One of the tech's at the dealer suspects the same. Any how, I will keep you up to date as to what the dealer finds.
Even tho' I only have 33 miles on the bike, I like it so far. I love that I can just hop on it and go, having trunk space, no clutch and shifting, great gas mileage, and most of all, it's up right seating position (no stress on my lower back) :p
-
http://www.kymcoforum.com/index.php?topic=9988.0 (http://www.kymcoforum.com/index.php?topic=9988.0)
-
Thanks for the link, Wayne.
Hopefully, this will be an easy fix, and not as painful as to what others have gone through.
I plan to call the service department today and inquire if they are equipped with a dyno, and or make note to the technician that the failure happens on an open stretch of road where they need to maintain a cruise speed @40+mph. The dealer is in San Francisco; lots of hills (up and down and stop and go traffic).
-
Sounds a lot like vapor lock. Have your dealer to off the crappy emissions system. Your bike will love you
-
Update ...
The short: issue resolved
Fix: The dealer tech disconnected the gas tank vent hose from the emissions plumbing and connected an extension, then routed it along side the case vent / catch hose that hangs down beneath the bike.
The long: Got the scooter home yesterday, then took it out today for some break-in miles and to see if indeed the issue was resolved. Gradually got the scooter up to 50mph (varied throttle along the way). The motor ran perfect throughout the ride, 26 miles added.
I had contacted the dealer early in the week and was informed the bike was ready for pick-up. I asked what was done, the service guy replied the tech had re-routed some hoses, then took it out for a test run and got it up to 50mph without a hitch.
After I got home from the ride, I removed the trunk to see if I would find anything different from the last time I had inspected things. The newly added extension hose immediately caught my eye.
-
Hey Bettin,
What exactly needs to be re-routed to bypass the crap emissions can?
Here in Illinois, bikes and scooters are exempt from emissions testing anyway, and I've considered simplifying the set up for long term reliability and consistency.
I'm just not sure where to re-route the hoses, and I've lost faith in letting my dealer even touch my scoot anymore.
Any insight appreciated!
Duke- 8)
-
^^^^yeah, what he said! Would you have any details and or know if there has been a DIY posted on the subject "removing emissions".
I am just curious of what's involved.
-
Hey Bettin,
What exactly needs to be re-routed to bypass the crap emissions can?
Here in Illinois, bikes and scooters are exempt from emissions testing anyway, and I've considered simplifying the set up for long term reliability and consistency.
I'm just not sure where to re-route the hoses, and I've lost faith in letting my dealer even touch my scoot anymore.
Any insight appreciated!
Duke- 8)
Is actually very easy to do. First thing is take your seat bucket out then you need to find the charcoal canister on the super 8 it's hanging under the gas tank by where the stator wires connect. Take it out. There will be a number o of vacuum lines and large hoses connected to it. The most important thing is you have to block off the vacuum lines going to the intake manifold. Find long 10mm screws and cut the vacuum lines back and plug them with the screws/bolts. Next find the one small line that goes to the gas tank, that is the breather for the tank, route it somewhere gas can dribble out of you over fill. The last thing is the egr, it's the large hose connected to the valve cover, follow the large hose and you will find the egr unit, rip it out and snip the hose back, use a large bolt or fold it back on itself and use hose clamps or zip ties to pinch it off. That's it!! Usually the mixture screw likes a slight adjustment after taking it off, but imho it makes these bikes run soooooo much better. I'll do a write up next time I take one off.
-
Thanx Bettin!
That may be added to my project list before the warm weather goes away.
Duke- 8)
-
The break-in miles continue ...... Taking advantage of having the Labor Day off, I took the S8 out to one of my favorite twisty back roads; plenty of varied throttle, elevation changes to load and un-load the motor and scrubbing in the fairly new factory tires.
here's a glimpse.
(http://i200.photobucket.com/albums/aa210/YSRCali/Kymco%20Super%208%20150/IMG_0951_zps803fb061.jpg) (http://s200.photobucket.com/user/YSRCali/media/Kymco%20Super%208%20150/IMG_0951_zps803fb061.jpg.html)
Upgrades I have in mind:
I swapped out the factory grips today with some better ones
possibly some better brake pads and maybe adding an SS line for better braking
a set of Pirelli Diablo's
-
Nice pic!
That looks like a cool place to go riding!
Duke- 8)
-
So, having the scoot for 3 weeks, I am enjoying it, and certainly am saving gas. Because of the small tank capacity and distance travelled weekly, I fuel up weekly, less than $4 vs my truck, approx. $80 every two weeks. Avg. speed is 50mph throughout my commute. I can hardly wait getting passed the break-in, so I don't feel like a rolling road block. Commute avg. speed is 50 - 60mph.
-
So, having the scoot for 3 weeks, I am enjoying it, and certainly am saving gas. Because of the small tank capacity and distance travelled weekly, I fuel up weekly, less than $4 vs my truck, approx. $80 every two weeks. Avg. speed is 50mph throughout my commute. I can hardly wait getting passed the break-in, so I don't feel like a rolling road block. Commute avg. speed is 50 - 60mph.
Phew that's nothing in gas! I'm filling up every few days haha. Still measured 70mpg
-
That's about what I'm getting for gas too. I'm lucky, because I work 5 minutes from home. I go to work and back for 5 days on less than a gallon of gas. Then I burn up another gallon on my days off, running errands and joyriding.
So, about $7-8 a week is all my Super8 150 is costing me to run. Totally justifies all the little quirks with the Supe!
Duke- 8)
-
Per my calculation of the miles I had travelled since my last fill-up, I'm getting approx. 67.5mpg.
-
Reached the 1k milestone last night. I am really happy with the scooter thus far, and look forward to riding on my daily commute.
-
WELCOME BRODDA!!!! Lol
Isn't she a Beaut!?
I just switched her to synthetic oil and she's better than new lol.
What state are you in
-
California
Planning to do a 1k oil service this weekend. I am debating to use the same oil that was used at the 200 and 600 mile service, or going with Rotella T6 synthetic (same oil I use for my Ninja 300).
Also, aside from the transmission oil (80w90) that the dealer uses, do any of you suggest to use other?
-
I'd say go for the Rotella. The sooner the synthetic gets in there the better. As for the gear oil I've only used 80w90, but I'm curious too
-
California
Planning to do a 1k oil service this weekend. I am debating to use the same oil that was used at the 200 and 600 mile service, or going with Rotella T6 synthetic (same oil I use for my Ninja 300).
Also, aside from the transmission oil (80w90) that the dealer uses, do any of you suggest to use other?
I would wait tel about 1500 miles until switching to synthetic. You don't really want synthetic oil until the rings are fully seated to the cylinder!!!
-
I would wait tel about 1500 miles until switching to synthetic. You don't really want synthetic oil until the rings are fully seated to the cylinder!!!
noted, and thanks for your input.
-
Rotella all the way! I ran rotella 15w-40 conventional for break in, and switched to the T6 5w-40 synth at around 1200+ miles.
My Super 8's motor loves the T6 oil. Plus, since I ride in the winter months as well, the lower winter weight makes the cold morning starts a breeze. Started up with no problems every morning so far, even at 15 degrees one morning!
On the gear oil, I ran conventional 80w-90 for a while, and then switched to 75w-90 synthetic gear oil before the cold weather started. Running like a champ on it.
3700+ miles, and counting! :)
Duke- 8)
-
Manimal: I'm glad you're enjoying your new S8. I had a similar problem when I 1st took delivery of my S8 (since sold it) One of my jets was clogged. Took it to the dealer & 15 minutes she was perfect. You should put a Shad 33 liter on the back. You'll need a Kymco SKU# K0SP59ST (Shad Top Box Mount Kit) Here's some pics of my Kymco S8 150:
http://www.kymcoforum.com/index.php?topic=8052.0 (http://www.kymcoforum.com/index.php?topic=8052.0)
Be safe & enjoy.
Quick Edit: A MUST is these mirror extender/risers. For $18.00 you can see so much better then the standard mirror. They make a world of difference.
http://www.ebay.com/itm/8mm-8-mm-CNC-Mirror-Riser-Extender-Adapter-Motorcycle-/370752299153?pt=Motorcycles_Parts_Accessories&hash=item56528f2091&vxp=mtr (http://www.ebay.com/itm/8mm-8-mm-CNC-Mirror-Riser-Extender-Adapter-Motorcycle-/370752299153?pt=Motorcycles_Parts_Accessories&hash=item56528f2091&vxp=mtr)
-
I use Rotella T6 as well. I have over 18,000 miles on mine. I installed some magnetic drain plugs on mine for cheap insurance since it has no oil filter. Other than a little fuzz the first few oil changes they haven't picked up anything.
-
I almost bought a super8, nice looking scoot. You can't beat the price too for a Kymco quality scoot.