KymcoForum.com
Scooters - 125 to 300 => People 150 => Topic started by: littlejoeyrimshot on August 08, 2014, 06:55:53 PM
-
is it simple to replace the headlight bulb? i need help in how to access the assembly
thanks
-
I have a 2007 Kymco people 150, sorry for forgetting this
-
Anyone?
I am struggling here as well.....
-
Any instructional videos to share? I have searched youtube and super8 is all I get .......
-
You have to take the two clam shell headset pieces apart, the front one with the bulb lifts forward. One screw in front below the headlight, two screws in back. And you have to remove the turn signals. The top of the front then prys apart gently.
-
(http://)You are awesome I have all screws (probably more than I need) I am scared in how to safely get the front underside apart from the red front clam shell body part... it unsnaps? I do not want to crack it
-
underside is loose ........
-
The black WILL NOT COME OFF!!!! There are hidden screws for the black half. The RED half pops forward, pry from the top of it and it will "pop" off the black part if you have all the screws out. Again with turn signals off too.
-
Thanks again !!
I will now give it a go !!
I am amazed there are no youtube videos on this for the P150
wish me luck !!
-
Thanks BettinANDlosing altho you are a winner in my book !!
it is people like you that make these forums work
thanks again
-
ðŸ‘ðŸ‘ðŸ‘💨