KymcoForum.com

General => Technical | How To => Topic started by: bluescoot125 on July 09, 2014, 12:16:18 AM

Title: bogging when cold?
Post by: bluescoot125 on July 09, 2014, 12:16:18 AM

2013 kymco agility 125 scooter boggs out until it gets warm doesn't take very long(10min)  but just wondering if this is common?

Title: Re: bogging when cold?
Post by: ophelia on July 09, 2014, 07:38:43 PM

Some engines take a brief warmup time of about 30 seconds to a minute before you can ride off gently. Don't press a bike hard when it's cold first thing in the day before the engine has had time to warm up, get lubricated and tighten up its clearances.

Title: Re: bogging when cold?
Post by: zombie on July 09, 2014, 07:48:09 PM

Pull out the auto choke, and check to see if it is working. It has to move at least 4mm to be good.
If it does not move test for +12 volts w/ the key on but the bike off.

Yours may be stuck in the "warm" position or the carbs choke circuit may be clogged up.

Automatic Enricher Operation (10x Speed) : Choke Bypass Bystarter (http://www.youtube.com/watch?v=O2qRVOkfdaY#ws)