KymcoForum.com
Offroad => MXU => Topic started by: fred pierce on June 16, 2014, 08:58:57 PM
-
my 2005 mxu 250 cuts out when i try to rev the engine.
any body got any ideas of hat could be the cause
-
Details.... When did it start? When was the bike last serviced? How did it start?
How many miles on the bike? Original owner?
What are you wearing? ;)
-
Thanks for coming back to me
The quad has covered 3800 Klms and needs a service oil change etc the problem started when I was riding it just cut out . The quad starts and runs but when applying gas it cuts out ???
Yours faithfully
Fred
-
I would pull the top off the carb, and check that rubber diaphragm for tears Next I would pull off the float bowl, and look for dirt/anything up in the main jet.
Also pull off the vacuum line that goes to the fuel petcock. Suck on the end of the line, and you should have a steady stream of fuel out of the tank.
Could be as simple as a bad spark plug but I think the above stuff may get it.
-
Hi thanks for the info
Will take your advise and look at what you suggested many thanks
Fred
-
No trouble. Please keep us posted on what you find.
-
i have exactly the same problem on mine (same year) but i have 4 x mxu's and only this prob on one, i have cleaned the carb and they have quite new plugs, will def try the other ideas out though....cheers ;0
P.S YOU DIDN'T ANSWER WHAT YOU WERE WEARING LOL
-
No one ever does... Sigh
-
Similar issues here..... did you guys find the route cause??
Cheers
-
Last time I had this problem, grandson's Mongoose 90, the nearly new NGK plug was bad. Plugs are pretty cheap and fairly easy to change. I would do that first. Second I would tear into the carb if the plug doesn't fix it.