KymcoForum.com

Scooters - 125 to 300 => Super 8 150 => Topic started by: Ms. Rev Limiter on June 11, 2014, 04:21:58 PM

Title: Break in period for new Super 8
Post by: Ms. Rev Limiter on June 11, 2014, 04:21:58 PM
How many miles are required before performance improves? I'm right at 60 miles now and everything seems a little tight.
Thanks in advance for your feedback!   
Title: Re: Break in period for new Super 8
Post by: DMblues01 on June 11, 2014, 06:02:19 PM
the owner's manual give a rough break-down on break in period.
Personally, I think the first 1000 miles is all part of break in. I changed the oil and gear lube every 200 miles during that period, and then switched to synthetic oil at 1200 miles.
I'm at 1500 miles now, and she runs like a champ!

Just remember, It's a Super 8 150!  It's NOT a highway cruiser!!
If you're wanting to cruise at 60+ mph on the highway, you have the wrong scooter!
Between 35-50 mph is where this scoot's comfort zone is. It will go a little more than that, but it will beg for mercy relatively quick!
But, I'm 230 lbs, so mine has to work a little harder. If you are significantly lighter than me, you may get a little more out of it.
 8)
Title: Re: Break in period for new Super 8
Post by: Ms. Rev Limiter on June 11, 2014, 08:10:39 PM
Appreciate the information! I'll switch to synthetic around 1200 mi. as well  ;D
(http://Kymco 3a)
Title: Re: Break in period for new Super 8
Post by: wkreps on June 12, 2014, 08:00:55 PM
then switched to synthetic oil at 1200 miles.
What brand/weight you using.
BTW we are neck and neck on miles. Mines just shy of 1300 too.
Title: Re: Break in period for new Super 8
Post by: DMblues01 on June 12, 2014, 08:31:40 PM
What brand/weight you using.
BTW we are neck and neck on miles. Mines just shy of 1300 too.

I switched to Rotella full synthetic 5w-40. Been running smooth and happy since the change. Starts a lot easier on cool mornings too.
And the Rotella synthetic is cheaper than the Valvoline motorcycle oil I was using during break in. (Plus, I work at a Walmart, so I can buy it for 10% off)   ;D
And it's actually rated for use in all combustion engines. Diesel, gasoline, and even motorcycle engines!