KymcoForum.com
Scooters - 50cc => Super 8 => Topic started by: Chris0381 on May 29, 2014, 08:53:50 PM
-
On USA models where the fronT parking lights dont work but are there bulb and all, where do the wire ends go? Are they hanging loose, do they have connectors on them or are the hidden in the wire harness.
TY
-
They are actually Blinker lights that are wired in for Euro/Asain bikes. Follow the ends of the blinker stalks, and the wires to the cowl lights are wrapped into the harness. You simply unplug one to the other.
-
TY
Wouldn't hurt to remove the front plastic and explore. Thinking of using the sockets and lights in the empty light spaces left and right off the headlight.
-
You can add them into the rear marker light or license plate light but I HIGHLY recommend using all LED's in that circuit. The stator cannot handle any more power than the bike draws stock.
-
You can add them into the rear marker light or license plate light but I HIGHLY recommend using all LED's in that circuit. The stator cannot handle any more power than the bike draws stock.
Yep Im looking into LED's now. TY Zombie. Any idea what the max amperage output for the alternator is or the cutoff where it doesnt or fails charge the battery anymore.
-
35 amps continuous, 50 peak (time it takes to charge a flasher.)
Also get the electronic flasher relays made for LEDS http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XLED+flasher+relay&_nkw=LED+flasher+relay&_sacat=0&_from=R40 (http://www.ebay.com/sch/i.html?_trksid=p2050601.m570.l1313.TR0.TRC0.H0.XLED+flasher+relay&_nkw=LED+flasher+relay&_sacat=0&_from=R40)
Without that the LEDS wont trigger
-
TY
More great info!!