KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: csor.zola on May 19, 2014, 11:42:12 AM

Title: how to set up throttle position sensor
Post by: csor.zola on May 19, 2014, 11:42:12 AM

hi there,

does anyone know how to adjust tps on my kymco agility 125. the manual does not say anything about it. i took it off couple of day ago and now m having difficulty to put it back correctly.

Title: Re: how to set up throttle position sensor
Post by: CROSSBOLT on May 20, 2014, 05:02:22 PM

See your post on "carburetor question".

Karl

Title: Re: how to set up throttle position sensor
Post by: csor.zola on May 20, 2014, 08:33:43 PM

If anybody would be interested in how to adjust TPS on kymco agility I have found half of the answer. Firstly, two thing has to be checked 1. resistance and 2. voltage and unfortunately I don't know the voltage setting. Which is the main thing. Anyway....
The resistance should be 5Kohm (-+30%) between the black and green wire and the same between the red and green wire WHEN THE THROTTEL FULLY OPEN.
I am still looking for the voltage setting. If anybody knows....pls.
But someone told it should be 0.5V