KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: hwasiecko on May 14, 2014, 03:11:16 PM

Title: Cracked transmission in my agility 50! Can it be fixed and if so how?
Post by: hwasiecko on May 14, 2014, 03:11:16 PM
I have an agility 50 and the transmission is cracked in multiple places. The engine still runs and the clutch and cvt parts are still ok it's just the case/ suspension arm that's broken. I'd like to know if I can find just this part for it.
Title: Re: Cracked transmission in my agility 50! Can it be fixed and if so how?
Post by: Stig / Major Tom on May 14, 2014, 04:56:35 PM
I have an agility 50 and the transmission is cracked in multiple places. The engine still runs and the clutch and cvt parts are still ok it's just the case/ suspension arm that's broken. I'd like to know if I can find just this part for it.

Have you tried the normal Kymco parts suppliers? Monster, Stadium Yamaha, etc?
Title: Re: Cracked transmission in my agility 50! Can it be fixed and if so how?
Post by: DMblues01 on May 15, 2014, 02:02:47 PM
You might also look around for a cheap donor scoot. If you can find one that was wrecked in the front, it should still have usable engine cases, and tons of spare engine parts as backups if you ever need them.
Maybe look up motorcycle salvage yards.
Never know...... could get lucky and find a goldmine of cheap parts. Just make sure you thoroughly inspect anything you use!

Just an idea.
Title: Re: Cracked transmission in my agility 50! Can it be fixed and if so how?
Post by: BettinANDlosing on May 24, 2014, 06:59:05 AM
That piece of aluminum is actually the left side engine case. Only way is to replace that case half which pretty much warrants a complete overhaul.
Title: Re: Cracked transmission in my agility 50! Can it be fixed and if so how?
Post by: zombie on May 24, 2014, 07:22:18 AM
Get a whole new QMB 139 under 300.00 on Ebay. Just keep your stator
Title: Re: Cracked transmission in my agility 50! Can it be fixed and if so how?
Post by: CROSSBOLT on May 24, 2014, 08:42:10 PM
Is it really cracked or is it some of the casting flaws that look like cracks? Some previous post showed pictures of "cracks" that turned out to be tiny ridges on the surface due to actual cracks in the casting die.

Karl