KymcoForum.com
Scooters - 125 to 300 => LIKE 200i => Topic started by: Stig / Major Tom on April 25, 2014, 11:15:06 PM
-
Fellow was parting out a wrecked LIKE200i....so I picked up some hoses (and the tank venting valve) and a few pounds of hardware for the scoot.
Not that I expect my scooter to shed this many parts.....unless I enter some desert enduros again.
{when I was in medic training in Texas yrs ago - we had bikes, and talked a fellow into entering his new Honda CL something into a 24 hr desert race....it had a raised pair of pipes on one side. So we figured it was a true moto-cross/enduro bike. 3 of us rode that Honda through 24 hrs on a desert course. That poor bike must have been 50lbs lighter when we crossed the finish line...a large part of that was the exhaust laying out there in the cactus somewhere. Blue flames coming through the night told the pit crew it was our bike coming, so open another beer and wake the next rider! A few weeks later we were all on our way to the games in sunny S.E. Asia - so our bikes were not too important after all.)
(http://i60.tinypic.com/m8i6iu.jpg)
-
The black bolts with the 10mm heads will come in handy. They tend to roll away when you're not looking. The same goes for the black screws.
-
Nice score. You can never have enough of those bits and pieces. They can be a real pain to order only to find out they got substituted when shipped or on back order.
-
Lots of money in that box if you had to buy that stuff new. For most folks ace hardware has 90% of the bolts you'll ever need.