KymcoForum.com

Scooters - 125 to 300 => Grandvista 250 => Topic started by: Rudolf on April 11, 2014, 02:31:49 PM

Title: New project.
Post by: Rudolf on April 11, 2014, 02:31:49 PM

I've was thinking of making a hazard light system on my bike. I've found a diagram how to do this system.
(https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/10001348_737227372976508_4994359561658110797_n.jpg)

Title: Re: New project.
Post by: windwheeler on April 11, 2014, 04:13:15 PM

Few questions, I am not that great in electrical things:

--  it does not address how the reguar binker system; how is it that it does not interfere?

--  why does it need "rectifier diods" to the bulbs?

-- does this work with ignition on and without ignition on?

Title: Re: New project.
Post by: Rudolf on April 11, 2014, 06:40:56 PM

It needs rectifier diodes so it doesn't interfere with the turn signals, since diodes let electricity trough one way and not in reverse.. And prevents the turn signals interfere with the hazard lights. The red wire from the ignition comes straight from the battery, the black wire from the ignition goes to power the rest of the system. So this system works with or without the ignition on. So the BLINKER relay can be used as turn signals and also to power hazard lights.