KymcoForum.com

Scooters - 50cc => zx50 => Topic started by: brucea382 on April 07, 2014, 11:04:12 PM

Title: PLEASE HELP>>>>>>Starting issues please help
Post by: brucea382 on April 07, 2014, 11:04:12 PM

I was going down the road and scooter just stop getting gas. Cleaned carb, checked reeds, cleaned air filter. Gas is getting to carb but the plug is dry. What could be the issue? im stumped. Also compression is good............new rings around 3 months ago. So what stop gas from getting to the plug? Thanks in advance for any advice...........PLEASE HELP LOL

Title: Re: PLEASE HELP>>>>>>Starting issues please help
Post by: 245luigi on April 07, 2014, 11:17:13 PM

Check the float

Title: Re: PLEASE HELP>>>>>>Starting issues please help
Post by: brucea382 on April 08, 2014, 12:24:44 AM

Yeah i checked float when i cleaned the carb. it looked fine and seemed to be functional. Like i said B4 im stumped. Shoot was running great and then it just stopped no warning no bogging  just stopped. Everything seems to be in order. Just not getting gas to plug

Title: Re: PLEASE HELP>>>>>>Starting issues please help
Post by: naughty lee on April 16, 2014, 01:44:12 PM

Is there fuel in the carb? If there is it's either a reed valve or jet fault

Title: Re: PLEASE HELP>>>>>>Starting issues please help
Post by: zombie on April 18, 2014, 02:19:41 AM

I talked to Brueca, and he has a bad cylinder/toasted rings.