KymcoForum.com
Scooters - 125 to 300 => Downtown 300 => Topic started by: Joe7911 on March 16, 2014, 01:02:01 AM
-
I just installed a new Cruiser Windshield from Puig.tv. They specialize in racing windshields but just released a cruiser one for the Kymco 300I. They are wind tunnel tested, so I did my own test today. at 70-75 miles per hour the bike now feels like if you are doing 40. No buffering just perfect. I'm 5'9" and I can see over screen if sitting up normal or can duck behind easily incase of heavy rain. I got the clear one but they have 3 colors light smoke and dark smoke. I wanted to make sure I had good visibly in rain or at night.
This windshield made such a difference on the bike ride, we had wind gust 15-20 MPH today and I did a 120 mile ride at least 100 miles expressway driving cruising mostly 60-65. took it up to 80 for a short while and no difference very smooth and stable an exceptional design and quality @ $200.00 including 2 day chipping its a bargain.If you are thinking of getting a windshield I strongly recommend this from Puig.tv. Fit and installation is perfect, 15- 20 minutes. Rubber gasket took time since windshield is a little thicker than factory.
see pictures below.
-
Hey Joe,
Where did you purchase the windshield at?
-
Looks great on the bike!
I may have to upgrade. 8)
-
I whent on line to www.Puigusa.com and sent them a email to info@puigusa.com they replied right away and I placed my order. They will also call you if you like. The new warehouse is in Orlando, Florida. The other way is contact one of the distributors or dealers. I choose to go strait to the source. They shipped last tuesday and wednesday I had the box via FedEx.
-
Hey Joe. I thought you were trying to sell your DT. Change of heart or lack of interest? How well does your Puig windshield protect your hands from the windchill? I am in the process of designing a way to mount these side cases ( http://www.ebay.com/itm/380697221575?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.com/itm/380697221575?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)) as I just cannot get my head to wrap around the monkey box. But to be fair, my DT is more about just pure riding fun and keeping the lines of the bike looking clean than being a commuter type vehicle. Throwing on the monkey box just destroys the perfect visual appeal (for me) of the DT so hopefully with my mad fabrication skills I will be able to figure out a way to mount these side boxes and then if all goes well, fab up sets for retail. I do like the idea of a better windshield though. Nice looking bike Joe!
-
well I had a couple of offers but I owe to much and can not afford to loose so much money on a new bike.
Si I decided to keep it for a while until I can payoff more of the bike. Kymco is a great bike but does not have the fame yet so market is very poor.
As fo rth Box I gout it for my helmet it will not fit under the seat so this was only thing left. It rains here a lot so even on a sunny day you never know get a shower and helmet becomes a pool full of water.
This windshield directs the wind around me a including my hands. I'm 5'9' and about 160LB so I was being hit with the wind on my chest and hands now gets diverted around me, cutting the wind nicely.
Like I said they got a nice factory with a wind tunnel. I guess they use all they learned from making Racing windshield for bikes like Ducati and others and now apply the technology to Cruiser windshield. Its bigger than the factory but smaller than the Givi but does not vibrate or warble at high speed and cuts trough the wind. I was very impressed on my run yesterday. Made the ride quitter and more enjoyable. High speed din't feel like before the noise and wind beating me up. Just at 65 -70 degree at 55 MPH that wind cuts you like a knife even with leather and protection gear. Now I cruised at 60-65 with a light jacket and felt great. I felt a little cool on my elbows and outer arms but if I tucked in nothing.
-
The Givi does give a little bit more hand protection.
-
I hear you Joe on the resale issue. I hadnt even planned on owning a DT 300i as it just fell into my lap. I was in the market for a 2009-2011 Yamaha Majesty as I had limited funds for my first real scooter, my 85 Honda elite 150 not withstanding. Then one morning I found this 2013 Kymco with 257 miles on Craigslist here in the DFW area and the asking price was only 4200 which happened to be a few bennys past my budget. But finding no really good Majesty's out there I figured I'd buy the DT, flip it and then go buy a new Majesty. Well I put it on craigslist and it languished there for 4 months. But as luck would have it, I fell in love with my DT and now am thankful it didnt sell. But eventually the word of how good and reliable Kymcos are will get out there and resale values should go up.
-
Yes Givi may appear to give better hand protection but look at enclosed factory comparison picture it has the inverted V for hand protection like the Givi but at the same time it courses up and the angles it has you have to see in person. This curves and slants are due to wind tunnel adjustment so with a smaller windshield it diverts the wind around the rider but still cuts the wind and does not act as a wall or a chute. This picture shows more but the actual piece is were you can appreciate it. And like I said before being a little shorter allows me to either see trough the windshield or over it if I need to.
This windshield also has the blackout that fades into clear like the factory one giving it that finished look. I saw one windshield that its clear all the way down so you have to get creative to block the plastic and screws on dash board. Believe me I studied and tread everything I could and spoke to the Manufacturer before spending my $204.00 for the windshield. I just returning anything.
Givi was my second choice but opted to wait till Puig finished the design and manufacture the screen, in all I waited since las May. I almost sold the bike but its a great commuter bike and dependable, just needs a windshield, more stooge for helmet and next is the seat and better grips that absorb more vibration.
-
The Givi is not in the picture to compare. It is just 2 of the Puig and the factory windscreen.
The Givi also uses the "V" by the hands that the Puig does. I am 5 10 and have no wind buffeting from the Givi and can also look over or through the screen.
The Givi gives great hand protection with it's design and is 25 inches across compared to 20 inches on the Puig.
The height difference is 32 inches for the Givi and 30 for the Puig for anyone that wants that comparison.
It's also $40 less then the Puig.
But to each their own since something like that comes down to personal preference anyways.
-
I have a Givi windshield & I am impressed with it, much netter than the stock kymco windshield. It directs the wind around past the hands protecting them from wind chill & giving better aerodynamics. Givi has a much larger surface giving more protection to the rider.
-
Hello. I need to replace my factory windshield due to a tip-over. I am only 5'5" tall and the puig sounds great but I'm concerned I won't be able to see over the top of it. I'm not sure how everyone has figured their windshield measurements. I measured my factory windshield and it is, 10.75 inches from the center/top of the dash to the top of the windshield. Would someone please be so kind as to tell me what this same measurement is on the Puig windshield? Thank you so much. I'm in MN and want to have it ready to ride just as soon as it is warm enough. Thanks again!
-
I will measure the windshield as soon as I get home. Like the picture shows, this windshield is a little larger than the factory but a little smaller than the Givi. This are the 2 windshields that I'm aware of being available for the DT 300i.
I'm 5'9 and I'm able to see over it. It has also to do if one sits up tall or leans forward.
The total price I paid for it was $204.00 but included Shipping via FedEx, only took 2 days.
I would suggest contacting www.puigusa.com (http://www.puigusa.com) directly. the email is info@puigusa.com and they will tell you if it is in stock.
Mine I had to wait about 6 weeks because its a brand new item and needed to come from Spain. I believe mine was one of the first here in the US. I was told they were designing and testing this windshield since last May. They work closely with Kymco.
They said they receive major shipments every other month.
-
Okay, thank you. The windshield sounds fantastic.
-
I measured from the top of the dashboard, right over the digital display to the tip of the windshield and it measures 15 ¾". I hope this measurement helps you.
-
If this is too tall for you I will sell my factory windshield if interested. It's like new I would just have to find a box to ship it in. Make me an offer if you like.
-
Lizzaanne,
Why aren't you riding already. ;)
I just rode for the first time this year today. Sure there is still a foot of snow on the yard but the roads are in ok shape and we live in MN. :o
-
If this is too tall for you I will sell my factory windshield if interested. It's like new I would just have to find a box to ship it in. Make me an offer if you like.
-
Joe- Thank you, very, very much! That helps me tremendously. I emailed the company but they didn't send me that measurement. I asked if the windshield was too tall, if it could be cut down a few inches and they didn't recommend it. I'm going out to the garage to sit on it and see if I think I can look over another 4". Thank you again!
-
I will certainly be interested in your factory windshield if I don't think I can see over the Puig. What do you think would be a fair price? Thanks again. :-)
-
MNpugdog - I got out on the 60 degree day for about an hour last weekend. It seems any temp under 60 degrees and I get too cold, even with multiple layers on. I have a Carhartt winter coat that is the best for not letting wind through. It's not the best for crash protection though. :-) Hopefully this week we will be able to get out a lot. I sure miss riding during the winter :-)
-
I would take $80.00 for the factory windshield. I even found a monitor box that should work fine. I would need zip code and address to get you exact shipping.
If you like we can communicate on regular email or call me. If you don't want to post that kind of information.
-
Lizzaanne,
If you want we could meet in the Cities somewhere and you could see how the Givi is on the DT. I also have my original one somewhere in the garage.
-
I have a Puig installed on my bike not a Givi. I have the original windshield and I thought you was looking for one.
As for meeting in the city is fine but I live in Miami, Florida and I believe you are in the north.
-
Hi All. Just bought a 2012 Downtown a few days ago and have a question on the windshield. I'm 5'2" and the top of the shield is right in my line of sight. It would be perfect if it was 1/2-1" lower. Any suggestions on fixes or a replacement shield? Thanks in advance for your input. ---Kathleen
-
I think at 5'2 even the Puig is going to be too tall the Givi is even taller so unless you get one and have it cut. (I don't recommend that) your best solution for now is stay with the Factory windshield.
I'm 5'9" and mine is about ½ inch below my eye site. The only real test is to get a piece of cardboard and please it over the factory windshield you sit on bike and have someone move it up to were you are comfortable then with tape secure to windshield and take your measurement. This way you will know what you need.
Hope this helps.
-
mnpugdog - Thanks for the offer to meet in the cities somewhere. I'd love too. I've measured and contacted Puig and I'm pretty sure the windshield will be too tall for me, so your Givi definitely will be but I'd be interested in seeing it and would probably buy your old windshield and I would save on shipping charges from Joe's (sorry Joe). I have yet to call a cycle shop and inquire about have a Puig or Givi cut down. I know it's not recommended... I wonder if it has been successfully done???
-
My Wife and Daughter bought GIVI windshield for my birthday. I installed it on 05/13/14. It was fun and weird. While riding, I could open my face plate and I wouldn't feel the wind. But the fun only lasted a week. On Tuesday, I broke the windshield in my garage. I thought I had put the kickstand all the way down. While I was extracting myself from my Downtown, she started to fall over. I grabbed the handle bar and slowed the fall. The windshield hit the garage floor, the windshield cracked and a piece was broken. No other damage.
-
Maybe is this fuel consumption bigger? ???