KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: grommet on March 13, 2014, 03:32:49 PM

Title: starter/brake lever
Post by: grommet on March 13, 2014, 03:32:49 PM

Hi, I have a people 125 and the starter only works when I apply the front brake, not the rear as it always has. It's not a major problem it's just that it's a bit tricky turning the throttle whilst pulling the brake. I would be grateful to know how to fix it. Cheers :)

Title: Re: starter/brake lever
Post by: Jim Moore on March 14, 2014, 11:39:39 AM

There is a switch inside the housing. Sometimes they go bad. The switch on my Agility 125 is under a bunch of plastic, so I can't tell you how to get it out.

Here's something else to check. See if your rear brake lever activates the brake light. I bet not, because it works off the same switch.

Title: Re: starter/brake lever
Post by: grommet on March 14, 2014, 04:53:35 PM

Thanks Jim, brake light not working as you say, will check it out

Title: Re: starter/brake lever
Post by: Stig / Major Tom on March 14, 2014, 11:48:10 PM

See topic post which fixed the same problem!

http://www.kymcoforum.com/index.php?topic=11117.0 (http://www.kymcoforum.com/index.php?topic=11117.0)