KymcoForum.com
Scooters - 125 to 300 => LIKE 200i => Topic started by: Dolemite on March 09, 2014, 05:15:06 PM
-
So 3 weeks after installing new bolts in the exhaust cover after two escaped, 3 decided to fall off on a long ride. My GF and I rode to Biloxi yesterday, about 100 miles each way, and on the way back we traded scoots. She was on my like and I saw something hanging off the side. We pulled over and 3 of the new bolts I had just put in had come out and the fourth was barely hanging on, the cover was flailing in the wind. So it's back to home depot for new bolts, lock washers, and a sh**load of Loctite. I may also try to find some skinny nuts to help hold them in place this time.
-
When I heard some folks where finding either missing bolts or loose ones I checked mine. So far no problem. I did however used a marker pen and mark a reference line across the bolt head and onto the shield. That way I can see if the bolts are working their way loose.
-
When I heard some folks where finding either missing bolts or loose ones I checked mine. So far no problem. I did however used a marker pen and mark a reference line across the bolt head and onto the shield. That way I can see if the bolts are working their way loose.
After reading all the comments before purchasing my LIKE....
I spent 3/4s of an hour checking everything on my scoot after they delivered it.
Nothing loose.....and still nothing loose after 10 months.
Stig
-
After reading all the comments before purchasing my LIKE....
I spent 3/4s of an hour checking everything on my scoot after they delivered it.
Nothing loose.....and still nothing loose after 10 months.
Stig
Yes, but what about the rider? ;)