KymcoForum.com
General => Technical | How To => Topic started by: ScooterWolf on March 09, 2014, 04:50:38 AM
-
Hello all,
Been a while since I've posted here. I've got a puncture on the rear tire of my Yeager. I don't have my manual with me a t the moment so I'm not sure if it's a tubeless tire, or not. Whichever the case I need to get it to my dealer to get it fixed. Is it better to use 'fixaflat, or apply a plug?
Wolf
-
It is very likely a tubeless. The way to fix it depends on the damage done to it, but as a general rule, "fix a flat" is more of a temporary fix. And if I could choose I wouldn't want to fill my tire with gooey junk. A plug fix is both fast and easy.
Edit: I might have misunderstood your question. If the repair is not meant to be permanent, but only to get the scoot to the dealer, I suppose anything goes.
-
Thanks Haarek,
I really just need to get the scooter to the dealership. The treads are shot, and I have damage to a muffler strut from hitting a pothole.
Thanks again,
Lowell
-
He is asking about the damage to the tire. If it is a puncture like from a nail then the plug is best. If it is something else like a cut or rupture it probably is not repairable.
-
the tires are really thin compared to an auto tire so any repair will be temporary, sure plug it then ride it directly to the dealer. I prefer to buy my tires and carry them in and yeah I would love to give the dealer the profit from the tire sale but they charge pretty much full price and I can get them delivered a week later free shipping for 55% of the dealers price so... (http://www.motorcycle-superstore.com/5/32/dv/scooter-tires.aspx (http://www.motorcycle-superstore.com/5/32/dv/scooter-tires.aspx))
I still recommend that you have the tires balanced if you normally ride at speeds above 45 mph the wear pays for it's self I recently changed my front tire with 21,000 miles and the reason for changing it was the amount of crazing or cracking showing up in the tread it still had 3 32nds of tread and was both round and smooth I normally get 10 14 thousand miles from the rear tire and expect to get more from the new city grips. Jim
-
In my old rear tire, two plugs lasted for a year...
-
... I can get them delivered a week later free shipping for 55% of the dealers price so...
Another good reason to get the tires online is they tend to be fresher.
Online they sell faster.
- At a dealer, especially in non-popular sizes the tires can sit for years.
- Sometimes they get exposed to sunlight from the window or when the tire rack is moved outdoors during the day to encourage buyers.
- Especially, if you don't ride many miles on your scoot your real enemy will be time and the cracking that comes with it not mileage.
- Finally, online has more brands and selection and of course price.
- Why pay 50% more at the dealer for old tires and limited selection? My dealer only had the rear in stock.
This post reads like an infomercial!
-
One quick note there are special plugs for motorcycle tires very different from regular plugs. the tire needs to be unmounted to install these. they look like really fat headed golf tees.
-
One quick note there are special plugs for motorcycle tires very different from regular plugs. the tire needs to be unmounted to install these. they look like really fat headed golf tees.
Patch plugs and not the bacon type...
-
Another good reason to get the tires online is they tend to be fresher.
Online they sell faster.
- At a dealer, especially in non-popular sizes the tires can sit for years.
- Sometimes they get exposed to sunlight from the window or when the tire rack is moved outdoors during the day to encourage buyers.
- Especially, if you don't ride many miles on your scoot your real enemy will be time and the cracking that comes with it not mileage.
- Finally, online has more brands and selection and of course price.
- Why pay 50% more at the dealer for old tires and limited selection? My dealer only had the rear in stock.
This post reads like an infomercial!
While I like to support good dealers, I'm cheap.. And since I ride 30K miles a year on 6 different bikes, I'm going through a couple sets a year.
I've changed all of my own tires for 20+ years. Basically, between internet tire prices, and the lack of labor, I get every 4th tire for free when compared to dealer prices/labor. Yeah, it did require a few investments as far as spoons, a bead breaker, a static balancer and hand cleaner, but I enjoy doing it and it gives me a chance to check my brake pads and look for issues on the bike while I'm down there. And I only had to purchase the tools once.
I can typically change a tire, from start (still on the bike) to finish (cleaning hands, tools put away) in about 45 minutes. I just consider it part of motorcycle/scooter ownership. I know it's not for everyone, but for me, it's part of the fun. :)
-
...I ride 30K miles a year on 6 different bikes,...
I can typically change a tire, from start (still on the bike) to finish (cleaning hands, tools put away) in about 45 minutes. ...
Impressive miles! It's a totally different game when you use 2 wheels to replace 4 vs it being a weekend or summer time toy. If you lived near san diego I would gladly pay you to change my tires.
Some people like me ask why change your own...
But, I got 2 flats in the past three years. That gets expensive so I struggled through my first dismount / car plug & patch / mount a couple of months ago. Interestingly, the tire would loose 90% of its pressure in a day or so. I submerged the entire tire in water and saw NO BUBBLES
I reinstall the tire (changed the valve core) and the problem continued. I definitely had a leak. Took it off again and again
no bubbles (this can't be possible - yes it can is what I learned) [see how reality schooled me in a way no book or classroom ever could]
I dismounted the tire pulled the nail out (which I picked up about a year and 4K miles ago and fixed with Slime [no dismount of tire or wheel]) pulled the rusty nail out with a pliers, drilled the hole, did a plug and patch with a car tire repair kit.
Struggled
to put the tire back on the rim and put wheel back on the scoot. Problem resolved and stayed resolved as I have ridden about 1K since.
Couldn't resist a dramatic flair.
PC
-
Couldn't resist a dramatic flair.
PC
Geez.!!
For a minute there I thought it was another youngster with a 50cc that wouldn't start....or wouldn't go 60MPH like the salesman promised!
-
Impressive miles! It's a totally different game when you use 2 wheels to replace 4 vs it being a weekend or summer time toy. If you lived near san diego I would gladly pay you to change my tires.
Some people like me ask why change your own...
But, I got 2 flats in the past three years. That gets expensive
Thanks, but it's easy to do when you avoid driving. :) Well, that and a couple 10 day cross country vacations on bike and a lot of 500-1000 mile weekends..
But just as you mentioned, it's all about price. My tires, between the scooters and motorcycles average about $100 each and a couple are tube type, so there's an additional $20 cost of a tube to add in there..
And there's one other issue that's caused me to change my own. Bad dealerships. Most are excellent, but I've had a bad experience and know others who have had the same. So instead I learned the process from others who do the same. And I've passed the information and process onto others.
I have no idea who my local Kymco dealer might be, and where I used to have an amazing BMW dealer within 15 miles, after they retired, my closest dealer is now about 2 hours away. So I do my own service on everything.
Don't tell anyone, but I looked at my Kymco People service manual tonight. :)
-
In a tire shop here, labor charge for a tire change is around 50 pesos or around $1.15 !!! Hahaha, I'd rather pay, sit on a bench and have my coffee and donuts...
-
I've had a bad experience and know others who have had the same. So instead I learned the process from others who do the same.
Don't tell anyone, but I looked at my Kymco People service manual tonight. :)
looked at the manual ... lol.
When I brought two wheels into a local dealer one from my old bmw and another for a Yamaha virago the tire guys refused at first to do the bmw wheel because they don't sell bmw. I told them they put that tire on and the tire before that. They then agreed to do it. When they did the yamaha they left the old wheel weights on and did not add new ones. I said the old wheel weighs balanced a new tire of a different brand? I asked them to re-spin the tire and they said no need as it spun zero (perfect balance the first time). Ok....
Last change about a year ago I was charged $94 for my Grandvista and I brought the wheels and tires in!
-
I said the old wheel weighs balanced a new tire of a different brand? I asked them to re-spin the tire and they said no need as it spun zero (perfect balance the first time). Ok....
Last change about a year ago I was charged $94 for my Grandvista and I brought the wheels and tires in!
I've gotten into the practice of balancing rims before installing tires. I've found quality tires are currently made so well that balancing is seldom needed. I check them, but it's not very often that I need to add even a 1/4 oz. Michelin, Bridgestone, and Metzelers are often spot on, tire after tire.
$94 for mounting? Yikes!!! I understand prices like that if they're having a tough time getting the beads to seat, which is often the case with scooter size tires. If they end up using a couple guys for an hour of sweating and swearing, $94 is a fair price for the labor involved. For cheap people like myself I just do it myself. For seating I've made a valve and a hose that I press onto the valve stem so I can flood the inside of tire with air to get the beads to at least get close to seating. :)
-
... made so well that balancing is seldom needed.
$94 for mounting? Yikes!!!
The motorcycle tire was a Dunlap so maybe it didn't need to be rebalanced. The $94 was for 0.75 hrs of labor - the guy installed the tires while I waited in the waiting room. The service desk said they charge by the hour at a rete of ~ $100 / hr.
... For seating I've made a valve and a hose that I press onto the valve stem so I can flood the inside of tire with air to get the beads to at least get close to seating. :
)
I need to make something like this. I resorted to using a ratcheting strap around the circumference of the tire and use that to force the bead on each side to the edge of the tire, then put aire in.
-
The air valve is just a simple ball valve with hose barbs on it. One side has an air chuck to go on the air hose, and the other is just open to be held over the valve stem. It doesn't always work, and sometimes rachet straps must also be used.. :)
-
I invested in a 4 year warranty on my tires ( and People 250S that Hubby now has ) . Have replaced mine twice in last year . Warranty is good as many times as needed for the 4 years ( unlimited tires) and replaced Hubbys' once ) . Well worth $100.00 investment. My dealer is less than 5 miles from me . ;)