KymcoForum.com

General => Technical | How To => Topic started by: jcatanz740 on October 26, 2013, 01:15:08 AM

Title: Getting to the valves on the 200 like and spark plug
Post by: jcatanz740 on October 26, 2013, 01:15:08 AM

I tryed to take off the panel where the valve an spark plug are  2 screws an the battery cover came off but could not pull the panel off is there another clip  or some tab that hold it in?

Title: Re: Getting to the valves on the 200 like and spark plug
Post by: big blue on October 26, 2013, 02:50:07 AM

Take a look at the video on Youtube titled Kymco  Like200i valve adjustment. It will answer all your questions.

Title: Re: Getting to the valves on the 200 like and spark plug
Post by: Stig / Major Tom on October 26, 2013, 12:33:05 PM

Quote from: jcatanz740 on October 26, 2013, 01:15:08 AM

I tryed to take off the panel where the valve an spark plug are  2 screws an the battery cover came off but could not pull the panel off is there another clip  or some tab that hold it in?

Do remove the under-seat bucket and you can work from inside and out to get that center panel off. It is a bit of work to get that panel to unclip the first few times, just take your time and be careful, it will come off! With the seat bucket off you can see what is clipped to what..............the frist time or two I used a butter knife to help things along.