KymcoForum.com
Scooters - 125 to 300 => Downtown 300 => Topic started by: feebleknievel on October 09, 2013, 08:12:19 PM
-
WILL 60/55 watt Xtreme White Plus H4 MELT THE FRONT LENSE ON THE DT 300
-
for a little more money you could go to HID lights with 3 times the light power,. i tried all the other lights and found them wanting more light, ended up with HID ,.low beam only
-
de can you tell me what bulb size and where you got them
-
bulb size is H8 available everywhere,
-
dayum de you have 2 names lol i know its h8 but what wattage did you get
-
WILL 60/55 watt Xtreme White Plus H4 MELT THE FRONT LENSE ON THE DT 300
The bulb holder will melt first... ;)
-
h8 is 35 watt
-
There's no point using a globe that works in low beam only!!
-
On the plus side I guess it takes the hassle out of changing from low to high beam. Maybe an idea for future 300s
-
i guess i need to take the front end off so i can see what i got ..but..lol
-
yes when your low beam is good to see far ahead you do not need high beam,. some have wired there low lights to be on all the time, and high beam when they want it,. all four on , I dont know how to wire for that, when I think to hard smoke comes out of my ears,. dont want to blow a fuse,.
-
yeah me to de when i think to much to much sh** happens then i realize what the hell did i do then it's to late .lol
-
do you have a service manual,. mine is not bad, got it with the scooter when I bought it,
-
i got the owners manual but bought 1 online .it doesnt tell you everything it shows stuff removed and stuff there but don't tell you how when i had my burgman i had 1 then that showed and did everything .but i guess i paid for what i got i wish i had a better 1 i'll learn eventually just gonna have to dive in it n play
-
yes, mine is not to clear on removal of panels , but is good on screws and nuts, with pictures,. say do you have Skype its what I use to talk to my relatives out west , for free,.
-
yes i have skype
-
Dede what brand of HID did you install? Can you give me an idea of the cost and difficulty of installation?
-
the outfit I got was by H I D country, cost about $70.00 2 years ago, had to put my brains in gear to figure out the wiring, it came with a relay, so the power was on all the time and the relay switched it on and off. through the hi and low beam switch,. I got the impression that racewalker wired his to be on all the time and may not need a relay I dont understand it ???? I thought the relay helped start the light surge when turned on, just dont know.???
-
HID lights are illegal... plus do research the housing even with projectors is designed to aim light from a halogen bulb. My best results are with upgraded halogens GP thunder 8500K with two 20W LED fogs...
20W LED Projector Fog Lights installed on Kymco Downtown 125i scooter (6000k) (http://www.youtube.com/watch?v=UQwGF7mfZm4#ws)