KymcoForum.com

Scooters - 125 to 300 => Downtown 300 => Topic started by: ride4fun on October 08, 2013, 04:25:45 AM

Title: Seat Removal
Post by: ride4fun on October 08, 2013, 04:25:45 AM

I have the service manual but I can't find instructions on how to remove the seat on my 300i. I want to take it in to have the seat shape changed but I am not sure that if I just remove the arm from between the storage area to the seat, if that will release the seat.
Suggestions?
Thanks, Bonnie

Title: Re: Seat Removal
Post by: CROSSBOLT on October 08, 2013, 04:43:13 AM

Remove the arm and two nuts at the forward end of seat where the hinge is. That will allow the seat to be removed.

Karl

Title: Re: Seat Removal
Post by: de dee on October 09, 2013, 01:54:26 AM

   and dont forget to unplug the wires for the obd plug at the rear, and the light wire at the side, 

Title: Re: Seat Removal
Post by: feebleknievel on October 09, 2013, 02:08:33 PM

ride4fun plllzz take pics before and after

Title: Re: Seat Removal
Post by: CROSSBOLT on October 09, 2013, 04:23:12 PM

What de dee and feeble said.....

Karl