KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: TuttoCambia on August 10, 2009, 08:07:25 AM
-
Does anyone know what the two lights above the headlight are on agility 50..I just noticed them but I cant find a switch to turn them on. ive tried all my headlight switches but nothing turns them on. I have a spot just above the starter button that looks like a switch could be installed there. I dont see why they would install the lights on the scooter if theres no switch for them. any ideas of what these lights are?
-
..they are "Position" lamps, and they are not wired into any circuit...at least mine were not.
..the lamps are not drawn into the electrical schematic in the service manual that I downloaded, but there are 2 rear position LEDs drawn on the schematic, that I havn't found on my scoot yet...???
..I did, however, wire the front lamps into the bright beam wiring, which is all I use, and changed the incandescents to LEDs...
peace
-
..they are "Position" lamps, and they are not wire into any circuit...at least mine were not.
..the lamps are not drawn into the electrical schematic in the service manual that I downloaded, but there are 2 rear position LEDs drawn on the schematic, that I havn't found on my scoot yet...???
..I did, however, wire the front lamps into the bright beam wiring, which is all I use, and changed the incandescents to LEDs...
peace
I have a number of interesting things in my A125 manual that do not exist in reality. For example, manual gasoline tank-reserve valve.
Also, as I already pointed out, the procedure for oil change is described completely wrongly.
-
The response made to info@kymco.com as follows: "These lamps are used in other parts of the world as turn signals. However, in the U.S. they do not meet the height and spacing requirements for legal highway use."
-
Urbestfriend replaced the bulbs with Ambers, hooked up
a Flasher and a Switch and they work like 4 way signals.
-
Urbestfriend replaced the bulbs with Ambers, hooked up
a Flasher and a Switch and they work like 4 way signals.
..cool idea!
-
@axy
You where saying something about having two leds wired in to the system in the back
how did you find those, where did you find a wiring diagram?
-
in england they are side lights and the switch is just above the starter it is a 3 position switch 1=off 2=side lights 3=main beam/headlights
there a pain in the arse as i have blown 2 bulbs in 6 months so just got a set of l.e.d one for it!!
-
Hey wordslinger. How did you wire those two lights into the high beam switch?
-
Hey wordslinger. How did you wire those two lights into the high beam switch?
Be aware his remark was made 11 years ago. And hasn't been active here in 4 years.
Stig