Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Joshl722

Pages: [1]
1
Agility 125 / Re: Help please throttle position sensor
« on: October 01, 2017, 01:47:12 PM »
Or is there a process of pairing the tps to my cdi maybe? I'm also trying with no airbox  to start it, would this affect it, I thought it would at least try to start without it even if it wouldn't run. Sorry for spamming my post everyone I hit send I think of another possible problem thanks
Josh

2
Agility 125 / Re: Help please throttle position sensor
« on: October 01, 2017, 01:43:12 PM »
It's really frustrating now as you can see it physically shoot smoke through airbox as it turns over so it is igniting. However it has been stood outside for a time with no spark plug in, could that be the culprit, dirty piston or a stuck exhaust valve?? Cheers
Josh

3
Agility 125 / Re: Help please throttle position sensor
« on: October 01, 2017, 01:39:07 PM »
That's exactly what I was going to say.. I haven't checked at at present I don't really know the process of checking. I have also read that the tps manages timing at certain throttle positions. The plug has been pulled off and the pin off the violet and red wire so I'm literally just trying to position the wire on the pin. As the tps works off resistance would this not affect the reading the tps receives?

4
Agility 125 / Re: Help please throttle position sensor
« on: October 01, 2017, 12:58:19 PM »
No one??? Just for update I have tried the new carb.   With all the wires in every order.. Still nothing.. Tried injecting gas into the head... Still nothing.. Absolute peach of a spark nice and blue.. No arcs. Carb is full so pet cock works.. It sounds like it's not firing but it is sparking.. Could it be a timing issue with the plug not sparking at the right time.. Would have thought it would have at least coughed or darted when putting gas in the head

5
Agility 125 / Help please throttle position sensor
« on: September 30, 2017, 09:30:04 PM »
Hi all.. Update on the agility city, my new carb came today and I wired it up all was going good.. Went to start the bike and nothing.. I have the problem of the previous owner cutting the plug completely off so did a bit of digging and apparently the wires go in the following order... Starting with the pin closest to the inlet first. Left to right in other words.
Purple and white
Green in the middle
Purple and black on the right

Can anyone Confirm as this new carb has made liter no difference

Thanks.. Josh

6
Agility 125 / Re: Help please please 3 random wires
« on: September 27, 2017, 10:05:31 AM »
Yes thanks... I've noticed though that it's not plug and play.. Are replacement cdi units hard to wire in.. I have a few here and think I will Try it

7
Agility 125 / Re: Help please please 3 random wires
« on: September 27, 2017, 12:19:52 AM »
Lol are you being serious.. All I get is someone taking the mick. .. Noone knows nothing??

8
Agility 125 / Re: Help please please 3 random wires
« on: September 26, 2017, 09:00:52 PM »
Seriously though is it just as simple as isolating some wires?

9
Agility 125 / Re: Help please please 3 random wires
« on: September 26, 2017, 08:54:44 PM »
Yeah I'll play about with that fluffle valve n all. LOL!

10
Agility 125 / Re: Help please please 3 random wires
« on: September 26, 2017, 06:49:09 PM »
What do you mean pal sorry... I'm not 100‰ familiar with the whole concept I've tried connecting the wires together etc but no joy if you hold the throttle in a certain place it coughs and sounds like it will fire but then kills the battery

11
Agility 125 / Re: Help please please 3 random wires
« on: September 26, 2017, 06:32:29 PM »
Many thanks pal... I have some mechanical knowledge however after owning about 30 bikes.. I've never owned a 4 stroke.. Or a moped so all the usual.. sh** I don't know what I'm doing while running round with my hands on my head moment is now over.. Carb ordered.. Lesson is don't buy cheap copys

12
Agility 125 / Re: Help please please 3 random wires
« on: September 26, 2017, 05:44:19 PM »
Also I'm a little confused the more I read this... It's a 2012 kymco agility city.. I purchased as a non runner and it came with what looked to be a throttle body that did not fit.. I now have a carburettor as I noticed a vacuum tap and did a little digging.. Are they in fact fuel injected or on carb?? The carb fits both in and outtake perfectly..  But I also do have tps wires.. Is it a system similar to the new Aprillia rs 125 with a carb and a tps?

13
Agility 125 / Re: Help please please 3 random wires
« on: September 26, 2017, 05:34:28 PM »
Explains why it won't start then.. I have bought a gy6125 carb that looks to be some sort of copy, it has no tps or anything.. What can I do?

14
Agility 125 / Help please please 3 random wires
« on: September 26, 2017, 02:52:35 PM »
Hi all.. New to the forum after being the proud owner of an agility 125... Question is.. I got it as a non runner.. I'm about ready to start it and just noticed 3 random wires right next to the carb.. One green which I presume is earth.. A purple and red and a purple and black does anyone know what they are for??

Pages: [1]