KymcoForum.com
Scooters - 125 to 300 => Agility 125 => Topic started by: knowitall77 on May 28, 2017, 05:18:26 AM
-
Just got a Kymco agility 125 with 522 km and attempted to adjust the Valve clearence. What I found was the valve clearences were up to specs and did not need adjustment. Makes me think if this is normal or Kymco don't fall out of specs over the first 1000 miles. The manual recommended an adjustment. Other than that, the scooter rides fine.
Sent from my XT1575 using Tapatalk
-
Just got a Kymco agility 125 with 522 km and attempted to adjust the Valve clearence. What I found was the valve clearences were up to specs and did not need adjustment. Makes me think if this is normal or Kymco don't fall out of specs over the first 1000 miles. The manual recommended an adjustment. Other than that, the scooter rides fine.
Sent from my XT1575 using Tapatalk
Yep,
Most of our owner's manuals say to check valves (and a bunch of othrr stuff....mainly bolts and nuts, oil change, etc) after the initial 600 miles. Just a new scooter check over ....then settle into those longer service times.
No, Kymco's don't need valves checked every 600 miles ....just that first check from new.
Stig