« previous next »
Pages: [1]

Author Topic: Supertrapp exhaust on my super 8 150  (Read 1943 times)

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Supertrapp exhaust on my super 8 150
« on: May 16, 2016, 02:07:14 AM »
I have a supertrapp exhaust laying around the shop. I am considering ordering a GY6 down pipe and with some minor mods, install on my bike.
Thoughts or suggestions are welcome
Logged

Triesandluth

  • Hero Member
  • *****
  • Posts: 813
  • Getting it, a mile per hour at a time
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #1 on: May 18, 2016, 07:38:10 PM »
I'm following this. I'd like to know as well

Sent from my VS985 4G using Tapatalk

Logged
Almost...at...speed...limit... Aww, brake lights..

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #2 on: May 18, 2016, 11:02:20 PM »
I am in the Caribbean so everything takes a lot longer to happen.
I saw gy6 header on ebay I will take my chances and get one. Let's hope it fits without too much cutting and bending
Logged

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #3 on: June 12, 2016, 06:59:25 PM »
Just ordered the header this weekend. I will post pictures and videos when I have all the items to make the change
Logged

BettinANDlosing

  • Hero Member
  • *****
  • Posts: 2235
  • Carter Merz
    • View Profile
    • Columbia Scooters
Re: Supertrapp exhaust on my super 8 150
« Reply #4 on: June 13, 2016, 05:43:35 PM »
Gy6 header is different than kymco gy6
Logged
2002 Kymco B&W 300; MRP 78MM "300CC", Naraku cam, Yoshimura rS3 exhaust, 17g Sliders, Yellow torque spring drilled airbox, stock carb #115 main #40 pj.

2001 "Yamaha" Zuma AKA MBK Booster; MHR OverRange, Dellorto 19mm BHBG, Polini "big" intake, RS-3 Rear shock, Stock cylinder.

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #5 on: June 20, 2016, 03:08:20 AM »
I am aware that there might be some differences between kymco and chinese GY6 headers but I guess  I have to wait until I receive the header to see just how much modifications are needed.
This is my next weekend project
Logged

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #6 on: July 06, 2016, 05:38:00 PM »
I received my GY6 header and modified it to fit the bike. Look at the attached pictures of the modifications.
I had to remove both ends. The muffler end had a flange with three holes and the end that goes to the engine had to be cut out and re-welded. Noticed how I used epoxy to hold the flange to the pipe before welding. This allows me to properly align the flange and pipe correctly to the engine exhaust port.
I have a video but I am still trying to figure out how to load it. Nine pictures were uploaded but looks like only one is showing
« Last Edit: July 06, 2016, 05:40:37 PM by erics »
Logged

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #7 on: July 10, 2016, 05:48:04 PM »
More pictures
Logged

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #8 on: July 10, 2016, 05:49:16 PM »
More pictures
Logged

erics

  • Newbie
  • *
  • Posts: 32
    • View Profile
Re: Supertrapp exhaust on my super 8 150
« Reply #9 on: July 10, 2016, 05:50:43 PM »
Last picture
Logged

An Error Has Occurred!

Call to undefined function split()
Back