KymcoForum.com
Scooters - 50cc => Agility 50 => Topic started by: miller10 on December 18, 2014, 08:15:37 AM
-
Yesterday someone try to steal my scooter. Police found it in 30 minutes but they allready tried to "bridge" the lock. Now I need help to wire it back again. I don't know where to connect which cable.
I have 2 green cables, 1 red, 1 black and 1 yellow-blue
-
http://www.kymcoforum.com/index.php?topic=4780.msg48544#msg48544 (http://www.kymcoforum.com/index.php?topic=4780.msg48544#msg48544)
That post has an Image Shack link that will take you to a Pict of the switch.
Glad you got your bike back, and welcome to the forum.
Just for reference... Red is 12 volt constant / black is 12 v switched / yellow, blue is the pulsar coil / green are ground.
-
o.k. as I understand it has the same wiring as Kymco Super 9 LC
-
They are all the same. :)
The key does nothing but continues power to the rest of the bike, and remove a ground from the CDI. It's nothing like a cars set up.
Post back how you make out.
-
I connected the lock as shown on picture above and the scooter is making noise but wont start.
I've changed the spark plug and now I'm charging the battery. I remember that I had the same problem with the original exhaust and no problem with LEOVINCE Hand Made- GY6 (4-stroke) exhaust.
-
Check the compression/spark/fuel.
Keep us updated please.