Author Topic: 2010 like 50 stalls when hot  (Read 1376 times)

JPowers

  • Newbie
  • *
  • Posts: 7
    • View Profile
2010 like 50 stalls when hot
« on: August 20, 2012, 09:48:42 PM »
I have a 2010 like 50.
When it gets hot it stalls and is very hard to get restarted.
I have tried a new carb,cdi box,fuel filter and petcock.
I even changed the vacuum line from the petcock to the manifold.
It acts like it's starving for fuel when it happens, but seeing that it happens only when hot leads me towards an electronic problem.


      Any help will be greatly appreciated,


                                                              JPowers

skippy

  • Sr. Member
  • ****
  • Posts: 421
    • View Profile
Re: 2010 like 50 stalls when hot
« Reply #1 on: August 20, 2012, 10:03:37 PM »
have you derestricted it? what mods if any have you done if any?
 

Peters

  • Hero Member
  • *****
  • Posts: 1582
  • In Glock I Trust
    • View Profile
Re: 2010 like 50 stalls when hot
« Reply #2 on: August 21, 2012, 02:12:29 AM »
Is it stalling at idle or while riding?

I assume you've tried a new spark plug
*2010 People 50 2t with 70cc kit and more
*2001 ZX-50 beater

JPowers

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: 2010 like 50 stalls when hot
« Reply #3 on: August 21, 2012, 07:26:52 PM »
The scooter has had a factory speed kit installed, but nothing else.

Also the scooter stalls when you come to a stop after it gets hot(Like from riding full speed for 5 miles or so).

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: 2010 like 50 stalls when hot
« Reply #4 on: August 21, 2012, 09:38:58 PM »
Do a cold resistance test on the stator, and again when hot. The reading don't matter at this point. You want to see the same reading on both tests., If they are different by more than 10% you have a bad stator. They usually act up when hot if they are going bad. That will tell if its electrical. Have you adjusted the idle MIX screw? Try turning the smaller screw 1/2 turn either way. Keep trying 1/2 turns till you get the highest rpm you can, and adjust the final idle speed using the Biger screw.
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

An Error Has Occurred!

Call to undefined function split()