KymcoForum.com

Scooters - 125 to 300 => Grandvista 250 => Topic started by: GBBBiker on July 25, 2014, 03:25:42 PM

Title: Add LED lights
Post by: GBBBiker on July 25, 2014, 03:25:42 PM

I want to add led lights to my Grandvista. A tail light/ brake light combo to the back of the back seat rest. LED strips to the side and back. I sthere an easy way to access the wiring without removing body panels? Any help appricated.

Title: Re: Add LED lights
Post by: BettinANDlosing on July 25, 2014, 03:44:56 PM

Just with the seat bucket out you should be able to access the tail light connector.

Title: Re: Add LED lights
Post by: GBBBiker on July 27, 2014, 12:38:55 AM

 ;)Thanks for the tip.

Title: Re: Add LED lights
Post by: GBBBiker on July 27, 2014, 08:08:41 PM

I looked at the seat bucket and could not figure how to remove it.

Title: Re: Add LED lights
Post by: BettinANDlosing on July 27, 2014, 09:17:53 PM

4 10mm bolts under the carpet. Should pull right out after that.

Title: Re: Add LED lights
Post by: Urbestfriend on July 28, 2014, 12:08:08 PM

Probably will have to remove battery and access plate behind it to access light harness.