KymcoForum.com
Offroad => MXU => Topic started by: Donmanolo on March 07, 2018, 11:26:12 PM
-
My apologies for not finding anything relevant using the search engine....
My starter clutch is slowly but surely going south and I'll have to get around to opening up the right side of the engine to change it out.
I was just wondering if the standard 27mm x1 mm left hand thread puller will work for removing the flywheel and the same thing for the 27mm castle nut tool for unbolting the starter clutch itself ?
I haven't got the scooter with me as it's currently parked at my parent's in a faraway European country where I can't open it up and check for myself quite yet.
I'll be buying these in the meantime, unless someone tells me I'm very wrong :
https://www.aliexpress.com/ite...s.13010208.99999999.262.nPiTKd
and
https://www.aliexpress.com/ite...s.13010208.99999999.269.nPiTKd
Thanks a lot in the meantime.
Antonio.
Sent from my BV7000 PRO using Tapatalk
-
My apologies for not finding anything relevant using the search engine....
My starter clutch is slowly but surely going south and I'll have to get around to opening up the right side of the engine to change it out.
I was just wondering if the standard 27mm x1 mm left hand thread puller will work for removing the flywheel and the same thing for the 27mm castle nut tool for unbolting the starter clutch itself ?
I haven't got the scooter with me as it's currently parked at my parent's in a faraway European country where I can't open it up and check for myself quite yet.
I'll be buying these in the meantime, unless someone tells me I'm very wrong :
https://www.aliexpress.com/ite...s.13010208.99999999.262.nPiTKd
and
https://www.aliexpress.com/ite...s.13010208.99999999.269.nPiTKd
Thanks a lot in the meantime.
Antonio.
Sent from my BV7000 PRO using Tapatalk
-
Most of you have followed our journey of starting a small business. From the beginning, Off Road Body Armor was strictly a manufacturer for Kymco UXV 450 body armor and accessories. With the help of many loyal customers on this forum, ORBA has grown to be one of the largest aftermarket accessory websites on the web; though, we have not forgotten our roots, right here with Kymco. Please visit our new and improved website.
https://orbausa.com/
https://offroadbodyarmor.com/
https://offroadbodyarmor.com/product-category/sxs-utv/kymco-utv/
(https://uploads.tapatalk-cdn.com/20180309/a3f3d95cb0de03d6650f1f79a876889c.jpg)
Sent from my SM-G950U using Tapatalk
-
Most of you have followed our journey of starting a small business. From the beginning, Off Road Body Armor was strictly a manufacturer for Kymco UXV 450 body armor and accessories. With the help of many loyal customers on this forum, ORBA has grown to be one of the largest aftermarket accessory websites on the web; though, we have not forgotten our roots, right here with Kymco. Please visit our new and improved website.
https://orbausa.com/
https://offroadbodyarmor.com/
https://offroadbodyarmor.com/product-category/sxs-utv/kymco-utv/
(https://uploads.tapatalk-cdn.com/20180309/a3f3d95cb0de03d6650f1f79a876889c.jpg)
Sent from my SM-G950U using Tapatalk
-
Most of you have followed our journey of starting a small business. From the beginning, Off Road Body Armor was strictly a manufacturer for Kymco UXV 450 body armor and accessories. With the help of many loyal customers on this forum, ORBA has grown to be one of the largest aftermarket accessory websites on the web; though, we have not forgotten our roots, right here with Kymco. Please visit our new and improved website.
offroadbodyarmor.com(https://uploads.tapatalk-cdn.com/20180309/a3f3d95cb0de03d6650f1f79a876889c.jpg)
Sent from my SM-G950U using Tapatalk
-
Most of you have followed our journey of starting a small business. From the beginning, Off Road Body Armor was strictly a manufacturer for Kymco UXV 450 body armor and accessories. With the help of many loyal customers on this forum, ORBA has grown to be one of the largest aftermarket accessory websites on the web; though, we have not forgotten our roots, right here with Kymco. Please visit our new and improved website.
offroadbodyarmor.com(https://uploads.tapatalk-cdn.com/20180309/124b8eaf5a74075cc8bd27284bf5b78a.jpg)
Sent from my SM-G950U using Tapatalk
-
Most of you have followed our journey of starting a small business. From the beginning, Off Road Body Armor was strictly a manufacturer for Kymco UXV 450 body armor and accessories. With the help of many loyal customers on this forum, ORBA has grown to be one of the largest aftermarket accessory websites on the web; though, we have not forgotten our roots, right here with Kymco. Please visit our new and improved website.
offroadbodyarmor.com(https://uploads.tapatalk-cdn.com/20180309/376f3283c040dd7141ad89f9a69f7279.jpg)
Sent from my SM-G950U using Tapatalk
-
Took my People 300i to get a new rear tire installed.
They are having an issue getting the swing arm off of the axle.
Anyone have any suggestions?
Thanks
Dirk
Sent from my SM-G950U using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Any of you out there that have a 2018 model year UXV, what are your thoughts and opinions? Operate ok? Would you wait until 2019 to purchase? Just want opinions so I can judge whether to buy a 2018 now or wait until next year's model. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
For those of you that have the 2018 UXV, what are your thoughts and opinions on it. I'd like some input so I can judge whether I should purchase a 2018 now or wait to purchase a 2019. Thanks in advance!
Sent from my Moto G Play using Tapatalk
-
Thinking of buying a 2018 700 uxv. Any others out there have the 2018 model? Likes/dislikes? Should I wait another year and see what happens with reliability form the first year?
Sent from my Moto G Play using Tapatalk
-
Hi
Sent from my Moto G Play using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in?
Sent from my Redmi 4 using Tapatalk
-
I don't remember when was the last time I rode 2 up on my scoot.
So yesterday I picked up a friend that left his scoot at the shop for meintainence.
We took off and about 1/2 km later the engine stated stumbling and shut off.
We coasted a bit and got off the road, and it didn't want to start. Checked the spark plugs cap, but it wasn't loose, nothing was leaking, the starter was spinning the engine. After a few minutes of head scratching it stated again.
We continued but it soon started stumbling again.
It was still working, but very badly.
I told my friend to get off, and everything was ok again!
I left him, went home, got into my car and picked him up.
Today rode alone for 40km, no issues.
Is my scooter jealous and wants me to ride alone on it, or just laisy and doesn't want an extra 90kg on it? [emoji54][emoji3]
Ok, it's seems like a fueling problem, but the only thing that comes to mind is that my friend is kinda heavy and the seat pressed on the fuel cap when sitting. Is that even possible? The fuel tank was almost full at the time.
Any ideas before I dig in? (https://uploads.tapatalk-cdn.com/20180424/bb92dc2e8880723e6193987d43caad54.jpg)
Sent from my Redmi 4 using Tapatalk
-
Question when lining up T.D.C on the fly wheel do the "T" or the line before the "T" need to be lined up with the "v" in order to be at top dead center on a Kymco Super 8 150(https://uploads.tapatalk-cdn.com/20180425/995eda59423458329f0f968957c7ebe0.jpg)(https://uploads.tapatalk-cdn.com/20180425/2500d50760841b101d4d6a697fe68618.jpg)
Sent from my LG-H918 using Tapatalk
-
Question when lining up T.D.C on the fly wheel do the "T" or the line before the "T" need to be lined up with the "v" in order to be at top dead center on a Kymco Super 8 150(https://uploads.tapatalk-cdn.com/20180425/995eda59423458329f0f968957c7ebe0.jpg)(https://uploads.tapatalk-cdn.com/20180425/2500d50760841b101d4d6a697fe68618.jpg)
Sent from my LG-H918 using Tapatalk
-
Question when lining up T.D.C on the fly wheel do the "T" or the line before the "T" need to be lined up with the "v" in order to be at top dead center on a Kymco Super 8 150(https://uploads.tapatalk-cdn.com/20180425/995eda59423458329f0f968957c7ebe0.jpg)(https://uploads.tapatalk-cdn.com/20180425/2500d50760841b101d4d6a697fe68618.jpg)
Sent from my LG-H918 using Tapatalk
-
Question when lining up T.D.C on the fly wheel do the "T" or the line before the "T" need to be lined up with the "v" in order to be at top dead center on a Kymco Super 8 150(https://uploads.tapatalk-cdn.com/20180425/9847ce202d1a10ee4fbbe0b6ab08fad3.jpg)
Sent from my LG-H918 using Tapatalk
-
Question when lining up T.D.C on the fly wheel do the "T" or the line before the "T" need to be lined up with the "v" in order to be at top dead center on a Kymco Super 8 150(https://uploads.tapatalk-cdn.com/20180425/429bccd52b35f484b41e2b510de61144.jpg)
Sent from my LG-H918 using Tapatalk
-
Ok here's an update I checked my valves and they were in excellent working condition and the only dilemma I have should the intake be set at
.004 and the exhaust .005 or .004 for intake and .004 for exhaust :"Note my carb is a 28mm also I have a shorty muffler"..... I notice after trying to start the engine it tries to turn over but "no go" and I also notice there's no fuel flow to the carburetor. The wierd thing I checked the fuel pump by adding vacuum to the vacuum hose and it had fuel flow. I then removed the fuel hose to the carb and applied vacuum to the vac house and I had fuel flow then reconnected the fuel house to the carb and again I applied vacuum to the vac hose and no fuel flow to the carb..I need big time suggestion..
What the (×#*%÷&@) is going on!!!
Sent from my LG-H918 using Tapatalk
-
Ok here's an update I checked my valves and they were in excellent working condition and the only dilemma I have should the intake be set at
.004 and the exhaust .005 or .004 for intake and .004 for exhaust :"Note my carb is a 28mm also I have a shorty muffler"..... I notice after trying to start the engine it tries to turn over but "no go" and I also notice there's no fuel flow to the carburetor. The wierd thing I checked the fuel pump by adding vacuum to the vacuum hose and it had fuel flow. I then removed the fuel hose to the carb and applied vacuum to the vac house and I had fuel flow then reconnected the fuel house to the carb and again I applied vacuum to the vac hose and no fuel flow to the carb..I need big time suggestion..
What the (×#*%÷&@) is going on!!!
Sent from my LG-H918 using Tapatalk
-
Ok here's an update I checked my valves and they were in excellent working condition and the only dilemma I have should the intake be set at
.004 and the exhaust .005 or .004 for intake and .004 for exhaust :"Note my carb is a 28mm also I have a shorty muffler"..... I notice after trying to start the engine it tries to turn over but "no go" and I also notice there's no fuel flow to the carburetor. The wierd thing I checked the fuel pump by adding vacuum to the vacuum hose and it had fuel flow. I then removed the fuel hose to the carb and applied vacuum to the vac house and I had fuel flow then reconnected the fuel house to the carb and again I applied vacuum to the vac hose and no fuel flow to the carb..I need big time suggestion..
What the (×#*%÷&@) is going on!!!
Sent from my LG-H918 using Tapatalk
-
Ok here's an update I checked my valves and they were in excellent working condition and the only dilemma I have should the intake be set at
.004 and the exhaust .005 or .004 for intake and .004 for exhaust :"Note my carb is a 28mm also I have a shorty muffler"..... I notice after trying to start the engine it tries to turn over but "no go" and I also notice there's no fuel flow to the carburetor. The wierd thing I checked the fuel pump by adding vacuum to the vacuum hose and it had fuel flow. I then removed the fuel hose to the carb and applied vacuum to the vac house and I had fuel flow then reconnected the fuel house to the carb and again I applied vacuum to the vac hose and no fuel flow to the carb..I need big time suggestion..
What the (×#*%÷&@) is going on!!!
Sent from my LG-H918 using Tapatalk
-
Ok here's an update I checked my valves and they were in excellent working condition and the only dilemma I have should the intake be set at
.004 and the exhaust .005 or .004 for intake and .004 for exhaust :"Note my carb is a 28mm also I have a shorty muffler"..... I notice after trying to start the engine it tries to turn over but "no go" and I also notice there's no fuel flow to the carburetor. The wierd thing I checked the fuel pump by adding vacuum to the vacuum hose and it had fuel flow. I then removed the fuel hose to the carb and applied vacuum to the vac house and I had fuel flow then reconnected the fuel house to the carb and again I applied vacuum to the vac hose and no fuel flow to the carb..I need big time suggestion..
What the (×#*%÷&@) is going on!!!
Sent from my LG-H918 using Tapatalk
-
Ok here's an update I checked my valves and they were in excellent working condition and the only dilemma I have should the intake be set at
.004 and the exhaust .005 or .004 for intake and .004 for exhaust :"Note my carb is a 28mm also I have a shorty muffler"..... I notice after trying to start the engine it tries to turn over but "no go" and I also notice there's no fuel flow to the carburetor. The wierd thing I checked the fuel pump by adding vacuum to the vacuum hose and it had fuel flow. I then removed the fuel hose to the carb and applied vacuum to the vac house and I had fuel flow then reconnected the fuel house to the carb and again I applied vacuum to the vac hose and no fuel flow to the carb..I need big time suggestion..
What the (×#*%÷&@) is going on!!!
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??(https://uploads.tapatalk-cdn.com/20180509/385a66fbbccb1491a647ba826e401d8c.jpg)
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??(https://uploads.tapatalk-cdn.com/20180509/385a66fbbccb1491a647ba826e401d8c.jpg)
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
Question: I recently notice my bottom chain guide is broken. I ordered another one with a bunch of other things but I was wondering do I have to remove the Cylinder head to replace the bottom guide??
Sent from my LG-H918 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you.
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you.
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you.
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you.
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you. This is what is currently going on
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you. This is what is currently going on http://
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you. This is what is currently going on http://[CODE][IMG][/IMG][/CODE]
Sent from my N9560 using Tapatalk
-
I recently bought a 2009 Kymco people 150 scooter from a woman who said that it's at for three or four years prior to me purchasing it. The scooter is in amazing condition and only has 667 miles on it. I bought a new battery cleaned out the gas tank and put brand new fuel in. It still will not start it makes it all the way to sounding like it's going to fire up and then nothing. I need any help or suggestions thank you. This is what is currently going on http://[CODE][IMG][CODE][/CODE][/IMG][/CODE]
Sent from my N9560 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
Thanks.(https://uploads.tapatalk-cdn.com/20180603/35a524be7c890bce98dcc13eccab7653.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
Thanks.(https://uploads.tapatalk-cdn.com/20180603/35a524be7c890bce98dcc13eccab7653.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
Thanks.(https://uploads.tapatalk-cdn.com/20180603/35a524be7c890bce98dcc13eccab7653.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
ThaInks.(https://uploads.tapatalk-cdn.com/20180603/ed4479702a202394a2fe2c215ed16f24.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
Thanks.(https://uploads.tapatalk-cdn.com/20180603/4d20850e2af3222d7859612984c63386.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
Thanks.(https://uploads.tapatalk-cdn.com/20180603/4d20850e2af3222d7859612984c63386.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
See pic below.
Thanks.(https://uploads.tapatalk-cdn.com/20180603/fa7229e1d63cfdfba14f8ad7000c1670.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi guys,
I am considering adding an additional tail light as an additional precaution to be more visible at night from the rear.
The best place I think would be to have it where the rear reflector would be. Any idea how I can remove it?
Thanks.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?(https://uploads.tapatalk-cdn.com/20180624/0d709bc041c3fe04e2b97c25a6d66632.jpg)(https://uploads.tapatalk-cdn.com/20180624/560da18ea045428b893b93feaa60d3b6.jpg)
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?(https://uploads.tapatalk-cdn.com/20180624/0d709bc041c3fe04e2b97c25a6d66632.jpg)(https://uploads.tapatalk-cdn.com/20180624/560da18ea045428b893b93feaa60d3b6.jpg)
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?(https://uploads.tapatalk-cdn.com/20180624/560da18ea045428b893b93feaa60d3b6.jpg)
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and I'm only hitting 35 downhill.. help!?9
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and im only hitting 35 down hill
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and im only hitting 35 down hill(http://)(https://uploads.tapatalk-cdn.com/20180624/c2f139b6a79f37015d7ba8fa345917bb.jpg)
Sent from my SM-S327VL using Tapatalk
-
Hey so I just bought a 2007 kymco super 9. I saw it a few houses down, thought the price tag said $1500. I went up to check it out.. wanted 500. I went to the bank and gave him 400. Ha. Is that a good deal? This is my first time getting a scooter. And I love it. Grew up on motorcycles but I thought this would be fun and it definately is. She only had 500 miles on her. I crave speed tho, and im only hitting 35 down hill
Sent from my SM-S327VL using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you. 222
Sent from my Mi A1 using Tapatalk
-
Greetings. This scooter has a courtesy light in the meeting well. The bulb is a wedge type. Every wedge bulb I've seen has a wider base than this one. I wonder if someone can identify the bulb type.
Thank you.
Sent from my Mi A1 using Tapatalk
-
Anybody know what size vario bushing goes on the 2007 kymco super 9? I ordered from scootertuning.ca and they sent me one with an inside diameter of 12mm. I told them I need the 14 and they are giving me trouble. So i had to put the stock restricted one back in. Suggestions?!
Sent from my LGL84VL using Tapatalk
-
Does anyone know if there are any changes coming up for the 2019 model year?
Sent from my Moto G Play using Tapatalk
-
Does anyone know if there are any changes coming up for the 2019 model year?
Sent from my Moto G Play using Tapatalk
-
Does anyone know if there are any changes coming up for the 2019 model year?
Sent from my Moto G Play using Tapatalk
-
Does anyone know if there are any changes coming up for the 2019 model year?
Sent from my Moto G Play using Tapatalk
-
Any changes coming in 2019 for the UXV's?
Sent from my Moto G Play using Tapatalk
-
When all of you are out using your Kymcos, how often do you see others enjoying them? It's few and far between for me.
Sent from my Moto G Play using Tapatalk
-
When all of you are out using your Kymcos, how often do you see others enjoying them? It's few and far between for me.
Sent from my Moto G Play using Tapatalk
-
Does anyone know if anything is new for 2019 models?
Sent from my Moto G Play using Tapatalk
-
Does anyone know if anything is new for 2019 models?
Sent from my Moto G Play using Tapatalk
-
Sent from my Moto G Play using Tapatalk
-
Until recently I had Dr.Pulley 13g sliders in my scoot.
They were in there for a bit over 15000km.
Still were ok, but wanted to try a lighter set to see if it will improve the low RPM acceleration.
Found a set of 12g KOSO sliders on www.aliexpress.com for 9.70$.
The price was suspiciously low, but ordered them anyway.
Got them 2 weeks ago and put them in.
In the beginning the scoot did feel more lively at low RPM and it did feel it was pulling better, but a few days ago getting the scoot up the revs from a start was really bad. Really bad...
Oped it up today and found the reason.
The sliders look terrible, as you can see on the pictures, and they were in only 640km!!!
So don't buy cheap KOSO sliders from AliExpress!
Put in the old Dr.Pulley sliders back in until I get a new set.
Changed the belt today too.
It was from Bando, still looked ok, but decided to change it. (picture)
It had 12700km.
Put in a Mitsuboshi. Let's see how it's gonna hold up.(https://uploads.tapatalk-cdn.com/20180814/1c1c49d9f31d3db0ae34c2ee5ae21a80.jpg)(https://uploads.tapatalk-cdn.com/20180814/23a33505318693e9303c80a1846067e3.jpg)(https://uploads.tapatalk-cdn.com/20180814/50f2966dca5314a596a04544617a6618.jpg)
-
Until recently I had Dr.Pulley 13g sliders in my scoot.
They were in there for a bit over 15000km.
Still were ok, but wanted to try a lighter set to see if it will improve the low RPM acceleration.
Found a set of 12g KOSO sliders on www.aliexpress.com for 9.70$.
The price was suspiciously low, but ordered them anyway.
Got them 2 weeks ago and put them in.
In the beginning the scoot did feel more lively at low RPM and it did feel it was pulling better, but a few days ago getting the scoot up the revs from a start was really bad. Really bad...
Oped it up today and found the reason.
The sliders look terrible, as you can see on the pictures, and they were in only 640km!!!
So don't buy cheap KOSO sliders from AliExpress!
Put in the old Dr.Pulley sliders back in until I get a new set.
Changed the belt today too.
It was from Bando, still looked ok, but decided to change it. (picture)
It had 12700km.
Put in a Mitsuboshi. Let's see how it's gonna hold up.(https://uploads.tapatalk-cdn.com/20180814/1c1c49d9f31d3db0ae34c2ee5ae21a80.jpg)(https://uploads.tapatalk-cdn.com/20180814/23a33505318693e9303c80a1846067e3.jpg)(https://uploads.tapatalk-cdn.com/20180814/50f2966dca5314a596a04544617a6618.jpg)
-
Until recently I had Dr.Pulley 13g sliders in my scoot.
They were in there for a bit over 15000km.
Still were ok, but wanted to try a lighter set to see if it will improve the low RPM acceleration.
Found a set of 12g KOSO sliders on www.aliexpress.com for 9.70$.
The price was suspiciously low, but ordered them anyway.
Got them 2 weeks ago and put them in.
In the beginning the scoot did feel more lively at low RPM and it did feel it was pulling better, but a few days ago getting the scoot up the revs from a start was really bad. Really bad...
Oped it up today and found the reason.
The sliders look terrible, as you can see on the pictures, and they were in only 640km!!!
So don't buy cheap KOSO sliders from AliExpress!
Put in the old Dr.Pulley sliders back in until I get a new set.
Changed the belt today too.
It was from Bando, still looked ok, but decided to change it. (picture)
It had 12700km.
Put in a Mitsuboshi. Let's see how it's gonna hold up.(https://uploads.tapatalk-cdn.com/20180814/d0d689eb559ca4446ab4dd23f0239200.jpg)(https://uploads.tapatalk-cdn.com/20180814/eacaa8af300ab6311814dd183ff6dea0.jpg)(https://uploads.tapatalk-cdn.com/20180814/cc6e1941f8c38337f7fde42eb05a2722.jpg)
-
I'm having some trouble with my Moped, it was running fine until a few weeks ago, when I'm on full acceleration it starts to lose power and cuts out and when I come to a junction it cuts out to, I have had the carb cleaned, it's had a new spark plug and a new fuel filter and still no change can someone please help me
Sent from my SM-A310F using Tapatalk
-
I'm having some trouble with my Moped, it was running fine until a few weeks ago, when I'm on full acceleration it starts to lose power and cuts out and when I come to a junction it cuts out to, I have had the carb cleaned, it's had a new spark plug and a new fuel filter and still no change can someone please help me
Sent from my SM-A310F using Tapatalk
-
I'm having some trouble with my Moped, it was running fine until a few weeks ago, when I'm on full acceleration it starts to lose power and cuts out and when I come to a junction it cuts out to, I have had the carb cleaned, it's had a new spark plug and a new fuel filter and still no change can someone please help me
Sent from my SM-A310F using Tapatalk
-
I'm having some trouble with my Moped, it was running fine until a few weeks ago, when I'm on full acceleration it starts to lose power and cuts out and when I come to a junction it cuts out to, I have had the carb cleaned, it's had a new spark plug and a new fuel filter and still no change can someone please help me
Sent from my SM-A310F using Tapatalk
-
Selling my 450i LE 4x4. 930 miles. 4000.00. (https://uploads.tapatalk-cdn.com/20180817/17bf0a32e7a256fe9e975b614f7c1b8c.jpg)(https://uploads.tapatalk-cdn.com/20180817/94481a00252063837fdcd7959d9961da.jpg)(https://uploads.tapatalk-cdn.com/20180817/6d2bf2874547e77fbb1e186f44b718cd.jpg)(https://uploads.tapatalk-cdn.com/20180817/614ecd125a1feb668e35566ad83b93fc.jpg)
Sent from my Moto G Play using Tapatalk
-
Selling my 450i LE 4x4. 930 miles. 4000.00. (https://uploads.tapatalk-cdn.com/20180817/17bf0a32e7a256fe9e975b614f7c1b8c.jpg)(https://uploads.tapatalk-cdn.com/20180817/94481a00252063837fdcd7959d9961da.jpg)(https://uploads.tapatalk-cdn.com/20180817/6d2bf2874547e77fbb1e186f44b718cd.jpg)(https://uploads.tapatalk-cdn.com/20180817/614ecd125a1feb668e35566ad83b93fc.jpg)
Sent from my Moto G Play using Tapatalk
-
Does anyone have a preference on where to buy accessories for a 700 uxv?
Sent from my Moto G Play using Tapatalk
-
Does anyone have a preference on where to buy accessories for a 700 uxv?
Sent from my Moto G Play using Tapatalk
-
Does anyone have a preference on where to buy accessories for a 700 uxv?
Sent from my Moto G Play using Tapatalk
-
Does anyone have a preference on where to buy accessories for a 700 uxv?
Sent from my Moto G Play using Tapatalk
-
Test
Sent from my Moto G Play using Tapatalk
-
Does anyone have a favorite online store to get accessories for your sxs?
Sent from my Moto G Play using Tapatalk
-
Do any of you use GPS when trail riding? What model do you use?
Sent from my Moto G Play using Tapatalk
-
Do any of you use GPS when trail riding? What model do you use?
Sent from my Moto G Play using Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/cf352c4e352928a75582fef3304d1f3b.jpg)(https://uploads.tapatalk-cdn.com/20180821/2713e920b753eb9b70ddc72ac01005f3.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/cf352c4e352928a75582fef3304d1f3b.jpg)(https://uploads.tapatalk-cdn.com/20180821/2713e920b753eb9b70ddc72ac01005f3.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/53af03ab67fd841ada2c5fbbcced3901.jpg)(https://uploads.tapatalk-cdn.com/20180821/6383eacc517acc809ab0a1f8a00c56a0.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/53af03ab67fd841ada2c5fbbcced3901.jpg)(https://uploads.tapatalk-cdn.com/20180821/6383eacc517acc809ab0a1f8a00c56a0.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/53af03ab67fd841ada2c5fbbcced3901.jpg)(https://uploads.tapatalk-cdn.com/20180821/6383eacc517acc809ab0a1f8a00c56a0.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/53af03ab67fd841ada2c5fbbcced3901.jpg)(https://uploads.tapatalk-cdn.com/20180821/6383eacc517acc809ab0a1f8a00c56a0.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/53af03ab67fd841ada2c5fbbcced3901.jpg)(https://uploads.tapatalk-cdn.com/20180821/6383eacc517acc809ab0a1f8a00c56a0.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/53af03ab67fd841ada2c5fbbcced3901.jpg)(https://uploads.tapatalk-cdn.com/20180821/6383eacc517acc809ab0a1f8a00c56a0.jpg)
Skickat från min SM-G950F via Tapatalk
-
I have a 7 pin box? Only find 6 pin boxes? Is there a different wiring or why don't I find the correct box? The numbers are correct but the connectors are wrong..(https://uploads.tapatalk-cdn.com/20180821/47d6542a07b9235df9a2f924358be884.jpg)(https://uploads.tapatalk-cdn.com/20180821/2d8d89183aa48f61314c1aa2ec3ba978.jpg)
Skickat från min SM-G950F via Tapatalk
-
Ready to pull the trigger on a 2018 700i Prime. If any of you bought the same, what did you pay for it out the door? Thanks!
Sent from my Moto G Play using Tapatalk
-
What did you all pay for yours out the door? Just curious. Havent bought mine yet, but probably will be soon and just wondering what everyone is paying. Thanks!
Sent from my Moto G Play using Tapatalk
-
What did you all pay for yours out the door? Just curious. Havent bought mine yet, but probably will be soon and just wondering what everyone is paying. Thanks!
Sent from my Moto G Play using Tapatalk
-
What did you all pay for yours out the door? Just curious. Havent bought mine yet, but probably will be soon and just wondering what everyone is paying. Thanks!
(http://)
Sent from my Moto G Play using Tapatalk
-
What did you all pay for yours out the door? Just curious. Havent bought mine yet, but probably will be soon and just wondering what everyone is paying. Thanks!
Sent from my Moto G Play using Tapatalk
-
When i was at mechanic for usual maintenance , my mechanic closed with adeshive tape the secondary air filter. Is that normal?? I think not ! The motor run as usual no change....
Trimis de pe al meu SM-J510FN folosind Tapatalk
-
When i was at mechanic for usual maintenance , my mechanic closed with adeshive tape the secondary air filter. Is that normal?? I think not ! The motor run as usual no change....
Trimis de pe al meu SM-J510FN folosind Tapatalk
-
So I've had Phil ( my 2001 kymco people 50) for a few months now and she only has 1300 miles or so.
Initially I had issues getting her to start consistently on a daily basis. So I stopped by local scooter shop and the guy told me that the choke in these struggles with temperature sometimes. So he showed me how I could manually choke it by covering the air intake. And that solved my problem of not starting every few days for a few weeks long.
Fast forward to the past week or so and I am having to do that every day, and now once she purrs up she will only stay running it I hold it at partial rev. Once I get going I'm fine. But if I stop at a light and let off the gas she dies.
I was hoping for some input on if this is a choke issue still, or something else? And if it is choke, what other options do I have? Can I bypass or unplug the electric choke or install an old-school pull choke?
Please help!
Sent from my Pixel using Tapatalk
-
So I've had Phil ( my 2001 kymco people 50) for a few months now and she only has 1300 miles or so.
Initially I had issues getting her to start consistently on a daily basis. So I stopped by local scooter shop and the guy told me that the choke in these struggles with temperature sometimes. So he showed me how I could manually choke it by covering the air intake. And that solved my problem of not starting every few days for a few weeks long.
Fast forward to the past week or so and I am having to do that every day, and now once she purrs up she will only stay running it I hold it at partial rev. Once I get going I'm fine. But if I stop at a light and let off the gas she dies.
I was hoping for some input on if this is a choke issue still, or something else? And if it is choke, what other options do I have? Can I bypass or unplug the electric choke or install an old-school pull choke?
Please help!
Sent from my Pixel using Tapatalk
-
So I've had Phil ( my 2001 kymco people 50) for a few months now and she only has 1300 miles or so.
Initially I had issues getting her to start consistently on a daily basis. So I stopped by local scooter shop and the guy told me that the choke in these struggles with temperature sometimes. So he showed me how I could manually choke it by covering the air intake. And that solved my problem of not starting every few days for a few weeks long.
Fast forward to the past week or so and I am having to do that every day, and now once she purrs up she will only stay running it I hold it at partial rev. Once I get going I'm fine. But if I stop at a light and let off the gas she dies.
I was hoping for some input on if this is a choke issue still, or something else? And if it is choke, what other options do I have? Can I bypass or unplug the electric choke or install an old-school pull choke?
Please help!
Sent from my Pixel using Tapatalk
-
So I've had Phil ( my 2001 kymco people 50) for a few months now and she only has 1300 miles or so.
Initially I had issues getting her to start consistently on a daily basis. So I stopped by local scooter shop and the guy told me that the choke in these struggles with temperature sometimes. So he showed me how I could manually choke it by covering the air intake. And that solved my problem of not starting every few days for a few weeks long.
Fast forward to the past week or so and I am having to do that every day, and now once she purrs up she will only stay running it I hold it at partial rev. Once I get going I'm fine. But if I stop at a light and let off the gas she dies.
I was hoping for some input on if this is a choke issue still, or something else? And if it is choke, what other options do I have? Can I bypass or unplug the electric choke or install an old-school pull choke?
Please help!
Sent from my Pixel using Tapatalk
-
Cell phone socket fuse blew. Took out a 0.8A that was in line. Seems kinda small amperage for a GPS or phone. Anyone know the correct amperage?
Sent from my Pixel using Tapatalk
-
Cell phone socket fuse blew. Took out a 0.8A that was in line. Seems kinda small amperage for a GPS or phone. Anyone know the correct amperage?
Sent from my Pixel using Tapatalk
-
Cell phone socket fuse blew. Took out a 0.8A that was in line. Seems kinda small amperage for a GPS or phone. Anyone know the correct amperage?
Sent from my Pixel using Tapatalk
-
Cell phone socket fuse blew. Took out a 0.8A that was in line. Seems kinda small amperage for a GPS or phone. Anyone know the correct amperage?
Sent from my Pixel using Tapatalk
-
Cell phone socket fuse blew. Took out a 0.8A that was in line. Seems kinda small amperage for a GPS or phone. Anyone know the correct amperage?
Sent from my Pixel using Tapatalk
-
Cell phone socket fuse blew. Took out a 0.8A that was in line. Seems kinda small amperage for a GPS or phone. Anyone know the correct amperage?
(https://uploads.tapatalk-cdn.com/20180919/2323ee0572a47ccbbe6066f18479b899.jpg)
Sent from my Pixel using Tapatalk
-
Have we got the "perfect" led lights for our scooter? Can you give me a link with prize <25$??
Στάλθηκε από το SM-G935F μου χÏησιμοποιώντας Tapatalk
-
Have we got the "perfect" led lights for our scooter? Can you give me a link with prize <25$??
Στάλθηκε από το SM-G935F μου χÏησιμοποιώντας Tapatalk
-
Just curious of those who own Kymcos now; would you buy another? Why or why not?
Sent from my Moto G Play using Tapatalk
-
Just curious of those who own Kymcos now - would you buy another? Why or why not?
Sent from my Moto G Play using Tapatalk
-
Just curious of those who own Kymcos now - would you buy another? Why or why not?
Sent from my Moto G Play using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters and motorbikes, in general. Wife just purchased a 2018 Like 200i (I know there's a separate forum for that) and I picked up a 2013 Super 8 150 with 1100 miles on it to cruise around town with her. I am wondering what you all suggest as far as basic tools for a quick-grab tool kit that I can keep under the seat or in a backpack. What things would you say I might find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New to scooters (and motorbikes, in general). Wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. Was wondering what you all would suggest as items to keep in a quick grab-and-go toolkit to keep under the seat or throw in a backpack. Basically, what things might I need/want to have on hand when we ride? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New to scooters (and motorbikes, in general). Wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. Was wondering what you all would suggest as items to keep in a quick grab-and-go toolkit to keep under the seat or throw in a backpack. Basically, what things might I need/want to have on hand when we ride? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New to scooters (and motorbikes, in general). Wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. Was wondering what you all would suggest as items to keep in a quick grab-and-go toolkit to keep under the seat or throw in a backpack. Basically, what things might I need/want to have on hand when we ride? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife recently purchased a 2018 Like 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend as far as a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack when we go riding. What tools and items might I need/want for these scooters while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife recently purchased a 2018 Like 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend as far as a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack when we go riding. What tools and items might I need/want for these scooters while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife recently purchased a 2018 Like 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend as far as a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack when we go riding. What tools and items might I need/want for these scooters while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife recently purchased a 2018 Like 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend as far as a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack when we go riding. What tools and items might I need/want for these scooters while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend for a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack. Basically, what tools and items might I find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend for a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack. Basically, what tools and items might I find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend for a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack. Basically, what tools and items might I find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend for a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack. Basically, what tools and items might I find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Hey, y'all! New here and new to scooters (and motorbikes, in general). My wife just purchased a 2018 LIKE 200i and I picked up a 2013 Super 8 150 with about 1100 miles on it to cruise around town with her. I am wondering what you all would recommend for a basic, grab-and-go toolkit to keep under the seat or to throw in a backpack. Basically, what tools and items might I find myself needing/wanting while out and about? Thanks!
Sent from my LG-M327 using Tapatalk
-
Please delete - test only
Sent from my XT1063 using Tapatalk
-
To keep this simple, what I mainly need to know is whether 2011 Super 8 150 parts will fit on a 2013, or were there any major changes between those two models.
I just purchased a 2013 and noticed that the light assembly for the license plate is a little wonky. It works but is loose, and there are some cracks in it. I found a site that sells parts (www.kymcopartsmonster.com), but it lists them as being for a 2011. Will that work?
Thanks!
Sent from my LG-M327 using Tapatalk
-
After a week of owning our first scooters, and some delays due to an overwhelmed DMV, my wife and I were finally able to take our bikes out for their maiden voyages. Well, I purchased used, so my 2013 Super 8 150 has been around the block a few times. But, my wife's 2018 Like 200i is fresh off the line. This was our first time riding motorbikes on actual streets, with actual moving cars. We mainly stayed in our surrounding neighborhood just to build our comfort level, but man did we have a blast. There's a stretch that allowed us to get up to about 45-50 mph, and both scooters did this effortlessly. I could see this getting addicting.(https://uploads.tapatalk-cdn.com/20181204/444d01dde7240b1c26eace686a6c99c8.jpg)
Sent from my LG-M327 using Tapatalk
-
Is it possible to install a GPS/phone mount on a 2013 Super 8 150? I was hoping to be able to use something that can be easily removed when I don't need it, like the phone mount I use on my bicycle handlebars, but I don't see anywhere that it could go. Any thoughts/suggestions welcomed. Also, if it is possible, what brand/model do you recommend? Thanks!
Sent from my LG-M327 using Tapatalk
-
Looks cool, since they claimed its for the Downtown, wonder is those fender and brake brackets were also model specific.(https://uploads.tapatalk-cdn.com/20190114/94b5c77e496bb807eef76b239355ae04.jpg)(https://uploads.tapatalk-cdn.com/20190114/d6651cc1980c64fa0f192e2a3f0b454f.jpg)(https://uploads.tapatalk-cdn.com/20190114/853f55993743b7aaffc72ad2b844d5cb.jpg)(https://uploads.tapatalk-cdn.com/20190114/02dd39d9c1fbf20747fd01811562f204.jpg)(https://uploads.tapatalk-cdn.com/20190114/a6256582cfc6dc5729535a05af6a1d62.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Looks cool, since they claimed its for the Downtown, wonder is those fender and brake brackets were also model specific.(https://uploads.tapatalk-cdn.com/20190114/94b5c77e496bb807eef76b239355ae04.jpg)(https://uploads.tapatalk-cdn.com/20190114/d6651cc1980c64fa0f192e2a3f0b454f.jpg)(https://uploads.tapatalk-cdn.com/20190114/853f55993743b7aaffc72ad2b844d5cb.jpg)(https://uploads.tapatalk-cdn.com/20190114/02dd39d9c1fbf20747fd01811562f204.jpg)(https://uploads.tapatalk-cdn.com/20190114/a6256582cfc6dc5729535a05af6a1d62.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Testing to see if I can create a new topic fro Tapatalk without issues.
Please feel free to delete this.
-
Testing to see if I can create a new topic fro Tapatalk without issues.
Please feel free to delete this.
-
Testing to see if I can create a new topic fro Tapatalk without issues.
Please feel free to delete this.
-
Testing Tapatalk Topic
-
Testing Tapatalk Topic
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just these 3 pics...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!(https://uploads.tapatalk-cdn.com/20190125/42c9b9e740ac7ec1dc7865be7dee747e.jpg)(https://uploads.tapatalk-cdn.com/20190125/ed0d32eb3933e67f3bc86cdf9365cb09.jpg)(https://uploads.tapatalk-cdn.com/20190125/2bc806e75043c832802b8e759b10723f.jpg)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just these 3 pics...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!(https://uploads.tapatalk-cdn.com/20190125/42c9b9e740ac7ec1dc7865be7dee747e.jpg)(https://uploads.tapatalk-cdn.com/20190125/ed0d32eb3933e67f3bc86cdf9365cb09.jpg)(https://uploads.tapatalk-cdn.com/20190125/2bc806e75043c832802b8e759b10723f.jpg)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just these 3 pics...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!http://(https://uploads.tapatalk-cdn.com/20190125/42c9b9e740ac7ec1dc7865be7dee747e.jpg)(https://uploads.tapatalk-cdn.com/20190125/ed0d32eb3933e67f3bc86cdf9365cb09.jpg)(https://uploads.tapatalk-cdn.com/20190125/2bc806e75043c832802b8e759b10723f.jpg)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just these 3 pics...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!(http://)(https://uploads.tapatalk-cdn.com/20190125/42c9b9e740ac7ec1dc7865be7dee747e.jpg)(https://uploads.tapatalk-cdn.com/20190125/ed0d32eb3933e67f3bc86cdf9365cb09.jpg)(https://uploads.tapatalk-cdn.com/20190125/2bc806e75043c832802b8e759b10723f.jpg)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just these 3 pics...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!(http://)(https://uploads.tapatalk-cdn.com/20190125/42c9b9e740ac7ec1dc7865be7dee747e.jpg)(https://uploads.tapatalk-cdn.com/20190125/ed0d32eb3933e67f3bc86cdf9365cb09.jpg)(https://uploads.tapatalk-cdn.com/20190125/2bc806e75043c832802b8e759b10723f.jpg)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just 3 pics...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!(http://)(https://uploads.tapatalk-cdn.com/20190125/3a21d4e66dc779d899c1147acc665e7f.jpg)(https://uploads.tapatalk-cdn.com/20190125/9bdd535b5b162ac114998c2393417e20.jpg)(https://uploads.tapatalk-cdn.com/20190125/f60025e031efd5ab6c41f458b5b96477.jpg)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just 3 pics(I tried posting but error msg)...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!(http://)
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just 3 pics(I tried posting but error msg)...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just 3 pics(I tried posting but error msg)...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank you very much!
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Well I recently won an agility 50 through an auction, needs a whole bunch of work(almost a rebuild) but the price was right. It's listing didn't post any info just 3 pics(I tried posting but error msg)...from my short research it's somewhere around a 2008. But what would be my best route in ordering the many cosmetic and mechanical parts? Thank y
ou very much!
Sent from my SAMSUNG-SM-J320A using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
Here is the pic of the plug I pulled out. It is a NGK CR8E.(https://uploads.tapatalk-cdn.com/20190127/6bfc6cb2c74bfbc8444884d5158c805c.jpg)(https://uploads.tapatalk-cdn.com/20190127/299f39333ad7d086feb71b4fc95e67f9.jpg)(https://uploads.tapatalk-cdn.com/20190127/746e7572e929e11ba354e6921cea3bb7.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
Here is the pic of the plug I pulled out. It is a NGK CR8E.(https://uploads.tapatalk-cdn.com/20190127/b05a4338c872a8c9f74796b8743b2b1c.jpg)(https://uploads.tapatalk-cdn.com/20190127/fa72f9b3ee32c94709858e8a826569f4.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
And advise?
Thanks.(https://uploads.tapatalk-cdn.com/20190127/b05a4338c872a8c9f74796b8743b2b1c.jpg)(https://uploads.tapatalk-cdn.com/20190127/fa72f9b3ee32c94709858e8a826569f4.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
And advise?
Thanks.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
And advise?
Thanks.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
And advise?
Thanks.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
And advise?
Thanks.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Again the DT won't start. She cranks, fuel pump working but it won't start.
Lifted the bucket and pulled the plug out, tested it with the plug back in the cap, gounded on the engine, still no spark.
This plug has around 5500kms on it. This is not the first time a plug had failed at this low mileage.
Is this a product quality on the plugs or something else is prematurely killing it.
I am also hoping and assuming the coil, wires are in good order. I do not know how to check them if they are still good.
It's night now and all the stores are closed. First thing tomorrow I'll pop to the shop to get two new spark plugs. And hope I get the spark back so I can get to work (late).
And advise?
Thanks.
Sent from my HUAWEI VNS-L31 using Tapatalk
-
Hi all,
Parked my 2013 people 300i for 2 weeks and now it takes about full minute if cranking to start. Once it starts it runs well. This occurs when I restart after about 1 minute stopped as well.
Any one had this happen to them an can point me in the right direction?
Thanks
Sent from my SM-G950U using Tapatalk
-
Hi all,
Parked my 2013 people 300i for 2 weeks and now it takes about full minute if cranking to start. Once it starts it runs well. This occurs when I restart after about 1 minute stopped as well.
Any one had this happen to them an can point me in the right direction?
Thanks
Sent from my SM-G950U using Tapatalk
-
Hi all,
Parked my 2013 people 300i for 2 weeks and now it takes about full minute if cranking to start. Once it starts it runs well. This occurs when I restart after about 1 minute stopped as well.
Any one had this happen to them an can point me in the right direction?
Thanks
Sent from my SM-G950U using Tapatalk
-
Good evening, just joined...my 2017 like 200i is not starting replaced battery and fuel pump starts, front light dims very little...no cranking sound?.it's been garage kepted. Only 6,000 miles traveled.
Sent from my LGMP260 using Tapatalk
-
Good evening, just joined...my 2017 like 200i is not starting replaced battery and fuel pump starts, front light dims very little...no cranking sound?.it's been garage kepted. Only 6,000 miles traveled. (https://uploads.tapatalk-cdn.com/20190208/511b1657b8ee14bed6e868c2a934cca8.jpg)(https://uploads.tapatalk-cdn.com/20190208/9ccb4cc429c04ac16bef356d18977015.jpg)
Sent from my LGMP260 using Tapatalk
-
Changed battery and still no difference....stumped...
Sent from my LGMP260 using Tapatalk
-
New battery.still no sign of starting?(https://uploads.tapatalk-cdn.com/20190208/48253176f5b7459dd462e303f0056aca.jpg)
Sent from my LGMP260 using Tapatalk
-
Hey, I'm newbie in this group, but I would like to know something. Is it possible somehow to unrestrict the ECU unit on the new Kymco super 8 4 stroke 2019.
It's got fuel injection, so I can't just cut the wire like the previous carburetor model??
Sendt fra min RNE-L21 med Tapatalk
-
Hey, I'm newbie in this group, but I would like to know something. Is it possible somehow to unrestrict the ECU unit on the new Kymco super 8 4 stroke 2019.
It's got fuel injection, so I can't just cut the wire like the previous carburetor model??
Sendt fra min RNE-L21 med Tapatalk
-
Hey, I'm newbie in this group, but I would like to know something. Is it possible somehow to unrestrict the ECU unit on the new Kymco super 8 4 stroke 2019.
It's got fuel injection, so I can't just cut the wire like the previous carburetor model??
Sendt fra min RNE-L21 med Tapatalk
-
Hey, I'm newbie in this group, but I would like to know something. Is it possible somehow to unrestrict the ECU unit on the new Kymco super 8 4 stroke 2019.
It's got fuel injection, so I can't just cut the wire like the previous carburetor model??
Sendt fra min RNE-L21 med Tapatalk
-
Hey, I'm newbie in this group, but I would like to know something. Is it possible somehow to unrestrict the ECU unit on the new Kymco super 8 4 stroke 2019.
It's got fuel injection, so I can't just cut the wire like the previous carburetor model??
Sendt fra min RNE-L21 med Tapatalk
-
download free full of action and comedy king fu panda 3 movie
in any format like mp4 3gp
http://downloadanimated.blogspot.com/2018/05/download-king-fu-panda-3-in-any-mobile.html
Follow me on Twitter for lots of funny and informative posts
http://twitter.com/sarahk9k
Like our Facebook page for lots of fun
https://www.facebook.com/Funland1000
Sent from my CRO-L22 using Tapatalk
-
download free full of action and comedy king fu panda 3 movie
in any format like mp4 3gp
http://downloadanimated.blogspot.com/2018/05/download-king-fu-panda-3-in-any-mobile.html
Follow me on Twitter for lots of funny and informative posts
http://twitter.com/sarahk9k
Like our Facebook page for lots of fun
https://www.facebook.com/Funland1000
Sent from my CRO-L22 using Tapatalk
-
download free full of action and comedy king fu panda 3 movie
in any format like mp4 3gp
http://downloadanimated.blogspot.com/2018/05/download-king-fu-panda-3-in-any-mobile.html
Follow me on Twitter for lots of funny and informative posts
http://twitter.com/sarahk9k
Like our Facebook page for lots of fun
https://www.facebook.com/Funland1000
Sent from my CRO-L22 using Tapatalk
-
I've got a 2003 kymco people 50cc 2-stroke..my question is what kind of big bore kit do I need for this engine? Probably a stupid question, but I'm new to scooters & can't find it anywhere..is it a gy6 motor? Or another type? Thanks in advance
Sent from my SM-G920V using Tapatalk
-
I've got a 2003 kymco people 50cc 2-stroke..my question is what kind of big bore kit do I need for this engine? Probably a stupid question, but I'm new to scooters & can't find it anywhere..is it a gy6 motor? Or another type? Thanks in advance
Sent from my SM-G920V using Tapatalk
-
I've got a 2003 kymco people 50cc 2-stroke..my question is what kind of big bore kit do I need for this engine? Probably a stupid question, but I'm new to scooters & can't find it anywhere..is it a gy6 motor? Or another type? Thanks in advance
Sent from my SM-G920V using Tapatalk
-
I've got a 2003 kymco people 50cc 2-stroke..my question is what kind of big bore kit do I need for this engine? Probably a stupid question, but I'm new to scooters & can't find it anywhere..is it a gy6 motor? Or another type? Thanks in advance
Sent from my SM-G920V using Tapatalk
-
I've got a 2003 kymco people 50cc 2-stroke..my question is what kind of big bore kit do I need for this engine? Probably a stupid question, but I'm new to scooters & can't find it anywhere..is it a gy6 motor? Or another type? Thanks in advance
Sent from my SM-G920V using Tapatalk
-
Been reading manuals and asking around. Dont know what is correct. 1 manual says. 0.12mm which is .004in. Another says 0.04mm which is like 0.001in. What is the actual correct valve clearance and why?
Sent from my LM-X210(G) using Tapatalk
-
Been reading manuals and asking around. Dont know what is correct. 1 manual says. 0.12mm which is .004in. Another says 0.04mm which is like 0.001in. What is the actual correct valve clearance and why?
Sent from my LM-X210(G) using Tapatalk
-
Been reading manuals and asking around. Dont know what is correct. 1 manual says. 0.12mm which is 0.004in. Another says 0.04mm which is like 0.001in. What is the actual correct valve clearance and why?
Sent from my LM-X210(G) using Tapatalk
-
Been reading manuals and asking around. Dont know what is correct. 1 manual says. 0.12mm which is 0.004". Another says 0.04mm which is like 0.001". What is the actual correct valve clearance and why?
Sent from my LM-X210(G) using Tapatalk
-
Hi guys.
As some would know, about three weeks ago my DT200 blew out it's con-rod bearing at 84000kms. It wasn't worth to have it repaired to get it back on the road and it was also it's third breakdown in 2019 alone.
Well, I have moved onto a new platform. A 2019 Yamaha X-Max.
Will have a review of it after getting a few more hundred miles under her.(https://uploads.tapatalk-cdn.com/20190411/68e9504cea56d6293a72d62037e02679.jpg)(https://uploads.tapatalk-cdn.com/20190411/8cb468282943018c985aaf7fd5e8b9a3.jpg)(https://uploads.tapatalk-cdn.com/20190411/898789b8c0497c70eb41dd181df56f8f.jpg)
Sent from my HUAWEI VNS-L31 using Tapatalk
-
This has been going on for some time now.
Last week I changed the bearing in the swingarm thinking it was the cause, but it wasn't.
When the wheel is on the drive shaft and pushed it all the way it wobbles, it's not firmly on the splines.
When I put everything back in and torque the nut to value in the manual the wobble is still there as you can see in the video.
(the pictures are not from my scooter, forgot to take pictures yesterday)
Any thoughts?
https://youtu.be/ORGs0fbZRAg
(https://uploads.tapatalk-cdn.com/20190414/a98d6c4615d4ec51906339ee47f56574.jpg)(https://uploads.tapatalk-cdn.com/20190414/3bbcaa867a2779e42c6489f2abfc2b01.jpg)
Sent from my Redmi 4 using Tapatalk
-
This has been going on for some time now.
Last week I changed the bearing in the swingarm thinking it was the cause, but it wasn't.
When the wheel is on the drive shaft and pushed it all the way it wobbles, it's not firmly on the splines.
When I put everything back in and torque the nut to value in the manual the wobble is still there as you can see in the video.
(the pictures are not from my scooter, forgot to take pictures yesterday)
Any thoughts?
https://youtu.be/ORGs0fbZRAg
Sent from my Redmi 4 using Tapatalk
-
This has been going on for some time now.
Last week I changed the bearing in the swingarm thinking it was the cause, but it wasn't.
When the wheel is on the drive shaft and pushed it all the way it wobbles, it's not firmly on the splines.
When I put everything back in and torque the nut to value in the manual the wobble is still there as you can see in the video.
(the pictures are not from my scooter, forgot to take pictures yesterday)
Any thoughts?
(https://uploads.tapatalk-cdn.com/20190414/cc83dfa870512f0f72ab8fd2bf88da92.jpg)(https://uploads.tapatalk-cdn.com/20190414/2678b24748101737adab4ad9f187e2c7.jpg)
Sent from my Redmi 4 using Tapatalk
-
This has been going on for some time now.
Last week I changed the bearing in the swingarm thinking it was the cause, but it wasn't.
When the wheel is on the drive shaft and pushed it all the way it wobbles, it's not firmly on the splines.
When I put everything back in and torque the nut to value in the manual the wobble is still there as you can see in the video.
(the pictures are not from my scooter, forgot to take pictures yesterday)
Any thoughts?
https://youtu.be/ORGs0fbZRAg
Sent from my Redmi 4 using Tapatalk
-
This has been going on for some time now.
Last week I changed the bearing in the swingarm thinking it was the cause, but it wasn't.
When the wheel is on the drive shaft and pushed it all the way it wobbles, it's not firmly on the splines.
When I put everything back in and torque the nut to value in the manual the wobble is still there as you can see in the video.
(the pictures are not from my scooter, forgot to take pictures yesterday)
Any thoughts?
Sent from my Redmi 4 using Tapatalk
-
This has been going on for some time now.
Last week I changed the bearing in the swingarm thinking it was the cause, but it wasn't.
When the wheel is on the drive shaft and pushed it all the way it wobbles, it's not firmly on the splines.
When I put everything back in and torque the nut to value in the manual the wobble is still there as you can see in the video.
(the pictures are not from my scooter, forgot to take pictures yesterday)
Any thoughts?
Sent from my Redmi 4 using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
[URL][/URL]
(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?(https://uploads.tapatalk-cdn.com/20190520/e592617c00913e23522d688be3331323.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
Sent from my Pixel 2 XL using Tapatalk
-
I bought this 2014 super 8 150 from a friend, its had a Yoshi pipe and the right jet upgrades to the carb. The first time I rode it I got about 2 miles and it went dead turned over a few times then stopped turning over, not like the battery went dead just stopped. Another find came by, but before I could get the jumper cables on, I tried it and it started up and I drove it back home. So now Everytime it goes dead usually it will continue to turn over, but occasionally not, but if I wait 15 minutes, it'll start back up and I can drive it home, I've replaced the cdi and the ignition coil, it still does the same thing. Any suggestions?
Sent from my Pixel 2 XL using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed 03 Burgman 400. While there are many things i think are better about the Kymco, the gauges stopped working after it got rained on. It's this a common issue, and if so, where should I look to fix the problem?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed 03 Burgman 400. While there are many things i think are better about the Kymco, the gauges stopped working after it got rained on. It's this a common issue, and if so, where should I look to fix the problem?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed 03 Burgman 400. While there are many things i think are better about the Kymco, the gauges stopped working after it got rained on. It's this a common issue, and if so, where should I look to fix the problem?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed 03 Burgman 400. While there are many things i think are better about the Kymco, the gauges stopped working after it got rained on. It's this a common issue, and if so, where should I look to fix the problem?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed 03 Burgman 400. While there are many things i think are better about the Kymco, the gauges stopped working after it got rained on. It's this a common issue, and if so, where should I look to fix the problem?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed 03 Burgman 400. While there are many things i think are better about the Kymco, the gauges stopped working after it got rained on. It's this a common issue, and if so, where should I look to fix the problem?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a 2009 Xciting 500Ri to replace my dearly departed Burgman 400. While there are many things I love about the Kymco, the first time it rained on the scooter the gauges stopped working and haven't come back since. Is this a common problem, and if so, where should I look to fix it?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a low mileage 09 XCiting 500Ri to replace my dearly departed Burgman 400. I love the Kymco, but have an issue. After it got rained on last week, none of the gauges work. Is this a common issue, and if so, how do I fix it?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a low mileage 09 XCiting 500Ri to replace my dearly departed Burgman 400. I love the Kymco, but have an issue. After it got rained on last week, none of the gauges work. Is this a common issue, and if so, how do I fix it?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a low mileage 09 XCiting 500Ri to replace my dearly departed Burgman 400. I love the Kymco, but have an issue. After it got rained on last week, none of the gauges work. Is this a common issue, and if so, how do I fix it?
Sent from my moto g(6) play using Tapatalk
-
I just picked up a low mileage 09 XCiting 500Ri to replace my dearly departed Burgman 400. I love the Kymco, but have an issue. After it got rained on last week, none of the gauges work. Is this a common issue, and if so, how do I fix it?
Sent from my moto g(6) play using Tapatalk
-
Hi
I've seen a few around on social media, however seemingly very difficult to find.
Thoughts on buying some pipe and making myself?
Sent from my CPH1803 using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.
Sent from my LG-Q710AL using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.
Sent from my LG-Q710AL using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.http://
Sent from my LG-Q710AL using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.
Sent from my LG-Q710AL using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.(http://)
Sent from my LG-Q710AL using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.(http://)
Sent from my LG-Q710AL using Tapatalk
-
Bought a yup 50 nice bike cant get it running have spark and fuel seems out of time check stator generator for sheard key no luck still wont start anyone help.(http://[CODE][/CODE])
Sent from my LG-Q710AL using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime. [URL][/URL]
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
Hello everyone
I have a 2016 uxv700 turf model and when you put it on forwards or reverse and try to give it gas it makes a horrible noise as it goes to move. I have read that they have problems with the bevel gears coming untorqued and also found a service bulletin on it. I'm currently in the process of pulling the rear diff out to try to narrow this problem down to see if it's coming from the diff or in the engine. I guess my question is have any of you ran into this or heard about it? The noise sounds like it could bust through the cases at anytime.
Sent from my SM-G960U using Tapatalk
-
I just purchased a 2018 Kymco Xtown. I rode today from Phoenix to my home in Bisbee, a distance of 220 miles. It was a hot but enjoyable ride.
I guess I'd like to join the other Xtown owners in requesting an Xtown thread..
Cheers
-
I just purchased a 2018 Kymco Xtown. I rode today from Phoenix to my home in Bisbee, a distance of 220 miles. It was a hot but enjoyable ride.
I guess I'd like to join the other Xtown owners in requesting an Xtown thread..
Cheers
-
Hi folks. After 15 years working and living abroad we are back in our home in Bisbee, Arizona. Between landing in San Francisco and home I picked up a Kymco X-Town (2018, 4500 miles). It's a gorgeous bike. I wonder whether there might an X-Town thread in the future or are there just too few of us.
-
Hi folks. After 15 years working and living abroad we are back in our home in Bisbee, Arizona. Between landing in San Francisco and home I picked up a Kymco X-Town (2018, 4500 miles). It's a gorgeous bike. I wonder whether there might an X-Town thread in the future or are there just too few of us.
-
Hi folks. After 15 years working and living abroad we are back in our home in Bisbee, Arizona. Between landing in San Francisco and home I picked up a Kymco X-Town (2018, 4500 miles). It's a gorgeous bike. I wonder whether there might an X-Town thread in the future or are there just too few of us.
-
Hi folks. After 15 years working and living abroad we are back in our home in Bisbee, Arizona. Between landing in San Francisco and home I picked up a Kymco X-Town (2018, 4500 miles). It's a gorgeous bike. I wonder whether there might an X-Town thread in the future or are there just too few of us.
-
Hi everyone. New to the forum from the UK. Got a little Kymco K-Pipe that's starting to gather dust. Bought it a few months ago and haven't got round to fixing it up yet. It's a little beat up, only got round to taking the motor out for a piston and valve seal change. There is some damage to the bike which includes bent forks (luckily got some spare though a few millimeters taller) and the worst bit for me is the broken rear light. Worst for me seeing as I can't find any cheap in the UK and for me it's not worth tipping a lot of money into. Though hands on work I'm not afraid of. My thought is fibreglass and smooth out the tail to fit a smaller universal brake light that sets me back less than £10. Just wondering if anyone has one of these that they've damaged and done some modifications to make up for it? Or any other ideas? Don't see many of these on the roads here at all. Maybe for good reason considering the state of the low mileage engine and overall condition of other parts considering its a 2015 plate, but can safely say I've worked on much worse. I have a small motorcycle workshop, can view it on insta or Facebook using my username above if interested. There's a picture attached of how it was bought. Any ideas much appreciated [emoji16](https://uploads.tapatalk-cdn.com/20190812/e784b1af03823d58820bcc3d80524f17.jpg)
Sent from my MYA-L11 using Tapatalk
-
Hi everyone. New to the forum from the UK. Got a little Kymco K-Pipe that's starting to gather dust. Bought it a few months ago and haven't got round to fixing it up yet. It's a little beat up, only got round to taking the motor out for a piston and valve seal change. There is some damage to the bike which includes bent forks (luckily got some spare though a few millimeters taller) and the worst bit for me is the broken rear light. Worst for me seeing as I can't find any cheap in the UK and for me it's not worth tipping a lot of money into. Though hands on work I'm not afraid of. My thought is fibreglass and smooth out the tail to fit a smaller universal brake light that sets me back less than £10. Just wondering if anyone has one of these that they've damaged and done some modifications to make up for it? Or any other ideas? Don't see many of these on the roads here at all. Maybe for good reason considering the state of the low mileage engine and overall condition of other parts considering its a 2015 plate, but can safely say I've worked on much worse. I have a small motorcycle workshop, can view it on insta or Facebook using my username above if interested. There's a picture attached of how it was bought. Any ideas much appreciated [emoji16](https://uploads.tapatalk-cdn.com/20190812/e784b1af03823d58820bcc3d80524f17.jpg)
Sent from my MYA-L11 using Tapatalk
-
Hi everyone. New to the forum from the UK. Got a little Kymco K-Pipe that's starting to gather dust. Bought it a few months ago and haven't got round to fixing it up yet. It's a little beat up, only got round to taking the motor out for a piston and valve seal change. There is some damage to the bike which includes bent forks (luckily got some spare though a few millimeters taller) and the worst bit for me is the broken rear light. Worst for me seeing as I can't find any cheap in the UK and for me it's not worth tipping a lot of money into. Though hands on work I'm not afraid of. My thought is fibreglass and smooth out the tail to fit a smaller universal brake light that sets me back less than £10. Just wondering if anyone has one of these that they've damaged and done some modifications to make up for it? Or any other ideas? Don't see many of these on the roads here at all. Maybe for good reason considering the state of the low mileage engine and overall condition of other parts considering its a 2015 plate, but can safely say I've worked on much worse. I have a small motorcycle workshop, can view it on insta or Facebook using my username above if interested. Any ideas much appreciated [emoji16]
Sent from my MYA-L11 using Tapatalk
-
Hi everyone. New to the forum from the UK. Got a little Kymco K-Pipe that's starting to gather dust. Bought it a few months ago and haven't got round to fixing it up yet. It's a little beat up, only got round to taking the motor out for a piston and valve seal change. There is some damage to the bike which includes bent forks (luckily got some spare though a few millimeters taller) and the worst bit for me is the broken rear light. Worst for me seeing as I can't find any cheap in the UK and for me it's not worth tipping a lot of money into. Though hands on work I'm not afraid of. My thought is fibreglass and smooth out the tail to fit a smaller universal brake light that sets me back less than £10. Just wondering if anyone has one of these that they've damaged and done some modifications to make up for it? Or any other ideas? Don't see many of these on the roads here at all. Maybe for good reason considering the state of the low mileage engine and overall condition of other parts considering its a 2015 plate, but can safely say I've worked on much worse. I have a small motorcycle workshop, can view it on insta or Facebook using my username above if interested. Any ideas much appreciated [emoji16]
Sent from my MYA-L11 using Tapatalk
-
Hi everyone. New to the forum from the UK. Got a little Kymco K-Pipe that's starting to gather dust. Bought it a few months ago and haven't got round to fixing it up yet. It's a little beat up, only got round to taking the motor out for a piston and valve seal change. There is some damage to the bike which includes bent forks (luckily got some spare though a few millimeters taller) and the worst bit for me is the broken rear light. Worst for me seeing as I can't find any cheap in the UK and for me it's not worth tipping a lot of money into. Though hands on work I'm not afraid of. My thought is fibreglass and smooth out the tail to fit a smaller universal brake light that sets me back less than £10. Just wondering if anyone has one of these that they've damaged and done some modifications to make up for it? Or any other ideas? Don't see many of these on the roads here at all. Maybe for good reason considering the state of the low mileage engine and overall condition of other parts considering its a 2015 plate, but can safely say I've worked on much worse. Any ideas much appreciated [emoji16]
Sent from my MYA-L11 using Tapatalk
-
My super 8 50cc 2t scooter kept bogging so bad it seemed like it was getting air or gas... Had a friend(new mechanic) look at it cleaned carburetor but then it wasnt getting any gas the line was disconnected and wasnt even coming out of the hose... After looking more into it he brings me something he says is called a cockpit... Apparently it wasnt doing its job =it is what pulls the gas out of the gas tanke(so he says)... Anyone know about a "cockpit" and whether I can drive w out it? which he said I could because he by passed... Am I gonna mess it up if I drive before I can order 1 and does anyone know its technical term and use?
Sent from my SM-J737P using Tapatalk
-
My super 8 50cc 2t scooter kept bogging so bad it seemed like it was getting air or gas... Had a friend(new mechanic) look at it cleaned carburetor but then it wasnt getting any gas the line was disconnected and wasnt even coming out of the hose... After looking more into it he brings me something he says is called a cockpit... Apparently it wasnt doing its job =it is what pulls the gas out of the gas tanke(so he says)... Anyone know about a "cockpit" and whether I can drive w out it? which he said I could because he by passed... Am I gonna mess it up if I drive before I can order 1 and does anyone know its technical term and use?
Sent from my SM-J737P using Tapatalk
-
My super 8 50cc 2t scooter kept bogging so bad it seemed like it was getting air or gas... Had a friend(new mechanic) look at it cleaned carburetor but then it wasnt getting any gas the line was disconnected and wasnt even coming out of the hose... After looking more into it he brings me something he says is called a cockpit... Apparently it wasnt doing its job =it is what pulls the gas out of the gas tanke(so he says)... Anyone know about a "cockpit" and whether I can drive w out it? which he said I could because he by passed... Am I gonna mess it up if I drive before I can order 1 and does anyone know its technical term and use?
Sent from my SM-J737P using Tapatalk
-
My super 8 50cc 2t scooter kept bogging so bad it seemed like it was getting air or gas... Had a friend(new mechanic) look at it cleaned carburetor but then it wasnt getting any gas the line was disconnected and wasnt even coming out of the hose... After looking more into it he brings me something he says is called a cockpit... Apparently it wasnt doing its job =it is what pulls the gas out of the gas tanke(so he says)... Anyone know about a "cockpit" and whether I can drive w out it? which he said I could because he by passed... Am I gonna mess it up if I drive before I can order 1 and does anyone know its technical term and use?
Sent from my SM-J737P using Tapatalk
-
Everything went fine I spliced into the red auxiliary wire so that it would have a inline fuse...well when I set the battery back down I set it back down backwards and wired backwards.. so now I put everything back like it was from the factory...I put the 12 volt plug's own inline fuse and I don't get nothing ...(https://uploads.tapatalk-cdn.com/20190822/156e3203acb2bd145107703ed1a98d76.jpg)(https://uploads.tapatalk-cdn.com/20190822/ba0a501146d36e84cc65a4dbd07ae23e.jpg)
Sent from my SM-G960U using Tapatalk
-
Everything went fine I spliced into the red auxiliary wire so that it would have a inline fuse...well when I set the battery back down I set it back down backwards and wired backwards.. so now I put everything back like it was from the factory...I put the 12 volt plug's own inline fuse and I don't get nothing ...(https://uploads.tapatalk-cdn.com/20190822/156e3203acb2bd145107703ed1a98d76.jpg)(https://uploads.tapatalk-cdn.com/20190822/ba0a501146d36e84cc65a4dbd07ae23e.jpg)
Sent from my SM-G960U using Tapatalk
-
Everything went fine I spliced into the red auxiliary wire so that it would have a inline fuse...well when I set the battery back down I set it back down backwards and wired backwards.. so now I put everything back like it was from the factory...I put the 12 volt plug's own inline fuse and I don't get nothing ...http://(https://uploads.tapatalk-cdn.com/20190822/156e3203acb2bd145107703ed1a98d76.jpg)(https://uploads.tapatalk-cdn.com/20190822/ba0a501146d36e84cc65a4dbd07ae23e.jpg)
Sent from my SM-G960U using Tapatalk
-
Everything went fine I spliced into the red auxiliary wire so that it would have a inline fuse...well when I set the battery back down I set it back down backwards and wired backwards.. so now I put everything back like it was from the factory...I put the 12 volt plug's own inline fuse and I don't get nothing ...http://
Sent from my SM-G960U using Tapatalk
-
Everything went fine I spliced into the red auxiliary wire so that it would have a inline fuse...well when I set the battery back down I set it back down backwards and wired backwards.. so now I put everything back like it was from the factory...I put the 12 volt plug's own inline fuse and I don't get nothing ...http://
http://(https://uploads.tapatalk-cdn.com/20190822/ca3c950fc85fbeddcaeceec703ba499e.jpg)(https://uploads.tapatalk-cdn.com/20190822/910c0b21456f8607c9c1a00fc5b7a263.jpg)
Sent from my SM-G960U using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help...
Sent from my SM-J737P using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help...
Sent from my SM-J737P using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help...
Sent from my SM-J737P using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help...
Sent from my SM-J737P using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help... (https://uploads.tapatalk-cdn.com/20190825/4f5f6c378b838f3081afe888fff11004.jpg)(https://uploads.tapatalk-cdn.com/20190825/2306d3a01c45135854bf0f981201446e.jpg)
Sent from my SM-J737P using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help...
Sent from my SM-J737P using Tapatalk
-
Ok I wanna add performance parts as I'm I'm derestricting my 2011 Super 8 50cc 2t... I would love some advice on what's important and where not to waste my money... Wanna do tonight so I can get started SUPER excited anything will help... http://
Sent from my SM-J737P using Tapatalk
-
Best mods or sights for mods (Carb) mainly... And any dos and donts for a beginner that would be SUPERB... Just dont wanna waste my money..
Sent from my SM-J737P using Tapatalk
-
Hi,
I have a uxv450 in Europe, it's restricted to 10.5kw (14hp), does anyone know how to destrict it and get it up to full power?
Sent from my Nokia 1 using Tapatalk
-
Hi,
I have a uxv450 in Europe, it's restricted to 10.5kw (14hp), does anyone know how to destrict it and get it up to full power?
Sent from my Nokia 1 using Tapatalk
-
Hi,
I have a uxv450 in Europe, it's restricted to 10.5kw (14hp), does anyone know how to destrict it and get it up to full power?
Sent from my Nokia 1 using Tapatalk
-
Hi
I have a uxv450 in Europe, it's restricted to 10.5kw (14hp), does anyone know how to destrict it and get it up to full power?
Sent from my Nokia 1 using Tapatalk
-
Hi
I have a uxv450 in Europe, it's restricted to 10.5kw (14hp), does anyone know how to open it up and get it up to full power?
Sent from my Nokia 1 using Tapatalk
-
Hey all
Can u advise which gearbox oil should I use for transmission
Thanks
Sent from my ONEPLUS A5010 using Tapatalk
-
Hey all
Can u advise which gearbox oil should I use for transmission
Thanks
Sent from my ONEPLUS A5010 using Tapatalk
-
Hey all
Can u advise which gearbox oil should I use for transmission
Thanks
Sent from my ONEPLUS A5010 using Tapatalk
-
Hey all
Can u advise which gearbox oil should I use for transmission
Thanks
Sent from my ONEPLUS A5010 using Tapatalk
-
Hey all
Can u advise which gearbox oil should I use for transmission
Thanks
Sent from my ONEPLUS A5010 using Tapatalk
-
Fresh clean(https://uploads.tapatalk-cdn.com/20190901/5fe840fd03853d97e2a9c28cf1363156.jpg)
Sent from my SM-G950U using Tapatalk
-
Fresh clean(https://uploads.tapatalk-cdn.com/20190901/5fe840fd03853d97e2a9c28cf1363156.jpg)
Sent from my SM-G950U using Tapatalk
-
Fresh clean(http://)(https://uploads.tapatalk-cdn.com/20190901/5fe840fd03853d97e2a9c28cf1363156.jpg)
Sent from my SM-G950U using Tapatalk
-
Fresh clean (https://uploads.tapatalk-cdn.com/20190901/5fe840fd03853d97e2a9c28cf1363156.jpg)
Sent from my SM-G950U using Tapatalk
-
Any ideas why they have these different pdi I'm NZ? What's with greasing the cvt shaft?
https://www.steelfort.co.nz/assets/manuals-documents/KYM-17001-UXV-Pre-Delivery.pdf
Sent from my Nokia 1 using Tapatalk
-
Any ideas why they have these different pdi I'm NZ? What's with greasing the cvt shaft?
https://www.steelfort.co.nz/assets/manuals-documents/KYM-17001-UXV-Pre-Delivery.pdf
Sent from my Nokia 1 using Tapatalk
-
Any ideas why they have these different pdi I'm NZ? What's with greasing the cvt shaft?
https://www.steelfort.co.nz/assets/manuals-documents/KYM-17001-UXV-Pre-Delivery.pdf
Sent from my Nokia 1 using Tapatalk
-
Just a quick question. Has anyone tried putting 25in tyres on the mxu 450.
24-10r12s are a rare size. And I don't wanna change the factory alloys
Sent from my SM-N960U using Tapatalk
-
Just a quick question. Has anyone tried putting 25in tyres on the mxu 450.
24-10r12s are a rare size. And I don't wanna change the factory alloys
Sent from my SM-N960U using Tapatalk
-
Just a quick question. Has anyone tried putting 25in tyres on the mxu 450.
24-10r12s are a rare size. And I don't wanna change the factory alloys
Sent from my SM-N960U using Tapatalk
-
Just a quick question. Has anyone tried putting 25in tyres on the mxu 450.
24-10r12s are a rare size. And I don't wanna change the factory alloys.
Sent from my SM-N960U using Tapatalk
-
So just brought home a NOS 2018 450i. Of course I had to fiddle with all the gadgets. And it seems my winch spool is stuck. I can hear the solenoid clicking. But it doesn't move. Tried unlocking it and pulling the cable out by hand but it won't move. Before you ask. It's not stuck on the swedge
Before I call the dealer. Do y'all have any ideas
Sent from my SM-N960U using Tapatalk
-
So just brought home a NOS 2018 450i. Of course I had to fiddle with all the gadgets. And it seems my winch spool is stuck. I can hear the solenoid clicking. But it doesn't move. Tried unlocking it and pulling the cable out by hand but it won't move. Before you ask. It's not stuck on the swedge
Before I call the dealer. Do y'all have any ideas
Sent from my SM-N960U using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get?
Sent from my SM-J737P using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get?
Sent from my SM-J737P using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get?
Sent from my SM-J737P using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get?
Sent from my SM-J737P using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get?
Sent from my SM-J737P using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get?
Sent from my SM-J737P using Tapatalk
-
Ok so the the belt needs to be bigger right? As well as the boss variator needs to be changed and I should show some gains? New carb, exhaust, air box, and slider weights only got me 40 and I'd like 50 have a 70cc malossi cylinder kit but may not use it... Also is it possible my variator didnt have a restriction because I dont notice a shoulder on the outside? If no shoulder then do I still get a new one to change the length and if so what length should I get? http://
Sent from my SM-J737P using Tapatalk
-
Hey guys and gals my 2009 decided not to start one morning booooo. I cleaned the spark plug got a spark put it back in no start so I tested the plug again no spark. Bought a new plug no spark so im thinking CDI? So I see a lot about ac dc CDIs but thats for the 4 pin and 2 pin I have a 8 pin so does it matter for dc ac?
Sent from my SM-G950U using Tapatalk
-
Hey guys and gals my 2009 decided not to start one morning booooo. I cleaned the spark plug got a spark put it back in no start so I tested the plug again no spark. Bought a new plug no spark so im thinking CDI? So I see a lot about ac dc CDIs but thats for the 4 pin and 2 pin I have a 8 pin so does it matter for dc ac?
Sent from my SM-G950U using Tapatalk
-
Hey guys and gals my 2009 decided not to start one morning booooo. I cleaned the spark plug got a spark put it back in no start so I tested the plug again no spark. Bought a new plug no spark so im thinking CDI? So I see a lot about ac dc CDIs but thats for the 4 pin and 2 pin I have a 8 pin so does it matter for dc ac?
Sent from my SM-G950U using Tapatalk
-
anyone know where to get a good deal on a new CDI? Of course its the 8 pin which there hardly any of those ugh!!!
Thanks for your help.
Sent from my SM-G950U using Tapatalk
-
I love my xciting. Rode it to the top of Petit Jean mountain today, and I really hate the thought of selling it. Unfortunately, being on Medicaid, I'm limited to one vehicle, and I'm thinking about something I can travel in for longer distances and in any weather. I could always pick up a 50cc scooter for just zipping around on. Anyway, it's an 09 X500Ri with about 4900 miles, new battery, new Shinko rear tire and unmounted front. It also has a Shad topcase and a backrest, and bar-end mirrors.
Now the bad... It was laid down before I bought it, so the plastic heat shield on the muffler is broken, and the emblem on that side could stand replacing. Paint damage is minimal. The Givi windshield is broken, and the front brake lever is bent. I'd have replaced the windshield already, but it seems nobody in the US has one. I was planning on buying short brake levers to eliminate any rubbing on the mirrors.
That's about it. What would be a fair price on it? I'm located in Perryville, Arkansas.
Sent from my moto x4 using Tapatalk
-
What a difference. With me at 6'3" the 200i seat was unbearable. The black one shows the results of a quick trip to the "tapiceria" across the border. Some of the best $60 I've ever spent.(https://uploads.tapatalk-cdn.com/20190922/15101acaba0859a9e35434032e7f1e55.jpg)
Sent from my MI 9 using Tapatalk
-
What a difference. With me at 6'3" the 200i seat was unbearable. The black one shows the results of a quick trip to the "tapiceria" across the border. Some of the best $60 I've ever spent.(https://uploads.tapatalk-cdn.com/20190922/15101acaba0859a9e35434032e7f1e55.jpg)
Sent from my MI 9 using Tapatalk
-
I've had a check engine light on my 2009 X500Ri since I bought it back in May. Never so much as a hiccup, so I wasn't worried, but I wanted it off. Tried the ignition on/throttle open/throttle closed sequence tonight, and it worked like a charm. Rode about 40 miles tonight, and it hasn't come back on yet...(knock on wood) ;)
Sent from my moto x4 using Tapatalk
-
Here's the long back story first. I had my bike at work on a thursday and it rained all day I did have a bag over the seat. It ran on Friday and Saturday I didn't use it again until Monday and when I went to start it nothing.
Checked for spark no spark. Bought a new spark plug got spark but than it wouldn't give me spark again.
Put in a new ignition coil and wire got spark started for a few seconds and died no spark again.
Now I let it sit for about a week until I got my new CDI so I got that tonight installed it ran longer than it has about 20 secs and then died. Had good spark when I tested it first time then after engine ran for that short period of time no spark again.
I am at a loss why am I getting spark sometimes and why does it start sometimes but than nothing.
Thank you for your help.
Jon
Sent from my SM-G950U using Tapatalk
-
Here's the long back story first. I had my bike at work on a thursday and it rained all day I did have a bag over the seat. It ran on Friday and Saturday I didn't use it again until Monday and when I went to start it nothing.
Checked for spark no spark. Bought a new spark plug got spark but than it wouldn't give me spark again.
Put in a new ignition coil and wire got spark started for a few seconds and died no spark again.
Now I let it sit for about a week until I got my new CDI so I got that tonight installed it ran longer than it has about 20 secs and then died. Had good spark when I tested it first time then after engine ran for that short period of time no spark again.
I am at a loss why am I getting spark sometimes and why does it start sometimes but than nothing.
Thank you for your help.
Jon(https://uploads.tapatalk-cdn.com/20190926/3a745ce3aed6540b51bd10a5cc8a3e3d.jpg)
Sent from my SM-G950U using Tapatalk
-
Here's the long back story first. I had my bike at work on a thursday and it rained all day I did have a bag over the seat. It ran on Friday and Saturday I didn't use it again until Monday and when I went to start it nothing.
Checked for spark no spark. Bought a new spark plug got spark but than it wouldn't give me spark again.
Put in a new ignition coil and wire got spark started for a few seconds and died no spark again.
Now I let it sit for about a week until I got my new CDI so I got that tonight installed it ran longer than it has about 20 secs and then died. Had good spark when I tested it first time then after engine ran for that short period of time no spark again.
I am at a loss why am I getting spark sometimes and why does it start sometimes but than nothing.
Thank you for your help.
Jon
Sent from my SM-G950U using Tapatalk
-
Here's the long back story first. I had my bike at work on a thursday and it rained all day I did have a bag over the seat. It ran on Friday and Saturday I didn't use it again until Monday and when I went to start it nothing.
Checked for spark no spark. Bought a new spark plug got spark but than it wouldn't give me spark again.
Put in a new ignition coil and wire got spark started for a few seconds and died no spark again.
Now I let it sit for about a week until I got my new CDI so I got that tonight installed it ran longer than it has about 20 secs and then died. Had good spark when I tested it first time then after engine ran for that short period of time no spark again.
I am at a loss why am I getting spark sometimes and why does it start sometimes but than nothing.
Thank you for your help.
Jon
Sent from my SM-G950U using Tapatalk
-
Here's the long back story first. I had my bike at work on a thursday and it rained all day I did have a bag over the seat. It ran on Friday and Saturday I didn't use it again until Monday and when I went to start it nothing.
Checked for spark no spark. Bought a new spark plug got spark but than it wouldn't give me spark again.
Put in a new ignition coil and wire got spark started for a few seconds and died no spark again.
Now I let it sit for about a week until I got my new CDI so I got that tonight installed it ran longer than it has about 20 secs and then died. Had good spark when I tested it first time then after engine ran for that short period of time no spark again.
I am at a loss why am I getting spark sometimes and why does it start sometimes but than nothing.
Thank you for your help.
Jon
Sent from my SM-G950U using Tapatalk
-
Here's the long back story first. I had my bike at work on a thursday and it rained all day I did have a bag over the seat. It ran on Friday and Saturday I didn't use it again until Monday and when I went to start it nothing.
Checked for spark no spark. Bought a new spark plug got spark but than it wouldn't give me spark again.
Put in a new ignition coil and wire got spark started for a few seconds and died no spark again.
Now I let it sit for about a week until I got my new CDI so I got that tonight installed it ran longer than it has about 20 secs and then died. Had good spark when I tested it first time then after engine ran for that short period of time no spark again.
I am at a loss why am I getting spark sometimes and why does it start sometimes but than nothing.
Thank you for your help.
Jon
Sent from my SM-G950U using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap.
Sent from my SM-G960W using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap.
Sent from my SM-G960W using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap. http://
Sent from my SM-G960W using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap. http://(https://uploads.tapatalk-cdn.com/20191002/68df5497e2f2781cf152558d07c82bbd.jpg)
Sent from my SM-G960W using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap. (https://uploads.tapatalk-cdn.com/20191002/68df5497e2f2781cf152558d07c82bbd.jpg)
Sent from my SM-G960W using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap.
(https://uploads.tapatalk-cdn.com/20191002/68df5497e2f2781cf152558d07c82bbd.jpg)
Sent from my SM-G960W using Tapatalk
-
I have a 2011 kymco 500i, love the machine. It has treated me well. I brought my kids to am out back camping trip, on my way back, the engine light came on and off and on again. Just as we got close to the truck, everything quit.
I popped the hood and noticed the positive cable came loose. Put it back on, had power but no start. Cranks but no start, no fuel pump no spark.?
I ordered a new ecm . Stator, solonoid are ok...
How long to get one shipped.? I am in canada.
When I called them in usa they weren't very helpful. I need it for my hunt trip in 2 weeks, it's been a month.
Help please... if someone has one , I'll buy it asap.
Sent from my SM-G960W using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell could it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell could it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
Im pretty sure its an air issue but i put a Mallossi BBK and style pro(dellorto clone) 19mm carb leo vince Zx exhaust exhaust and tuner pod air filter... The bbk most recent mod and for some reason the reeds for mallossi dont match the holes on the kymco reed valves it over laps but doesnt match exactly.. Is it possible this may be my problem when i blow air in w air compressor fires right up only thing i can tell it may be.. If so do i change the intake or what can i do to fix the problem?
Sent from my SM-J737P using Tapatalk
-
i ordered the 19mm carb kit (2 months ago) it came w a single cable throttle and the one on my bike has a split into 2 cable.. Are all 2011 like this? the guy i purchased online from seemed like he didnt believe it when i told him it wouldnt fit... Im pretty sure it connects to the oil pump but im not a mechanic and this my first scooter so just guessing.. Can anybody tell me where i can find the one i need? Also my helper broke the bolt of going into my engine head. we have extracted it but not sure what i can do? We were trying to put a 70cc mallossi bbk on it (only mod thats given us trouble) but its been a nightmare for some reason my ex mechanic made every mistake u can make arrows wrong way, didnt seat rings right and so may have to buy my third bbk and really dont have the money for it... Any help i can get i appreciate at this point..
Sent from my SM-J737P using Tapatalk
-
i ordered the 19mm carb kit (2 months ago) it came w a single cable throttle and the one on my bike has a split into 2 cable.. Are all 2011 like this? the guy i purchased online from seemed like he didnt believe it when i told him it wouldnt fit... Im pretty sure it connects to the oil pump but im not a mechanic and this my first scooter so just guessing.. Can anybody tell me where i can find the one i need? Also my helper broke the bolt of going into my engine head. we have extracted it but not sure what i can do? We were trying to put a 70cc mallossi bbk on it (only mod thats given us trouble) but its been a nightmare for some reason my ex mechanic made every mistake u can make arrows wrong way, didnt seat rings right and so may have to buy my third bbk and really dont have the money for it... Any help i can get i appreciate at this point..
Sent from my SM-J737P using Tapatalk
-
Does anyone in the US seen the Givi d293st windshield? All I can find are Italian sellers on eBay.
Sent from my moto x4 using Tapatalk
-
Have been trying to get my super 8 50cc 2t started but its not happening.. First i thought it wasnt getting any gas to the carb but i believe its getting enough to start it... Any suggestions on what it may be compression is a little low calls for 100lbs and im at 90lbs been told though that once started that would be ok but im by far no mechanic and this is my first scooter...
Sent from my SM-J737P using Tapatalk
-
2011 Super 8 50cc 2t
Sent from my SM-J737P using Tapatalk
-
Whatsapp/text/Call+1 (443)-281-3429
Ghb Liquid $250/gallon ,Roxycodone $9/pill
LSD $400/sheet,
Shrooms $30/gram,
Marijuana $300/30gram,
Mdma $200/10g,
Xanax$3/pill, Adderall $3/pill ,
Jwh018$220/10g,
Oxycodone 80's $11/pill,
Vyvanse70mg $5/pill.
contact Whatsapp/text/Call+1 (443)-281-3429
Email:charlesgromez@gmail.com
http://genuinepassportsonline.com(https://uploads.tapatalk-cdn.com/20191215/9939da8649986fadf5301b7298ef4b49.jpg)
Sent from my SM-J320F using Tapatalk
-
Whatsapp/text/Call+1 (443)-281-3429
Ghb Liquid $250/gallon ,Roxycodone $9/pill
LSD $400/sheet,
Shrooms $30/gram,
Marijuana $300/30gram,
Mdma $200/10g,
Xanax$3/pill, Adderall $3/pill ,
Jwh018$220/10g,
Oxycodone 80's $11/pill,
Vyvanse70mg $5/pill.
contact Whatsapp/text/Call+1 (443)-281-3429
Email:charlesgromez@gmail.com
http://genuinepassportsonline.com(https://uploads.tapatalk-cdn.com/20191215/9939da8649986fadf5301b7298ef4b49.jpg)
Sent from my SM-J320F using Tapatalk
-
WHATSAPP/TEXT/CALL:+1(443) 281-3429
EMAIL:pamelawilliam02@gmail.com
Ketamine 250grams :$450 + Delivery.
Vyvanse 70 mg $5 Per pill
Hydros Yellows: 10/325-$4.50 each
Hydros Blues 10/500-$3.50 Each
30mg IR ritalin-$3.00 each
20 mg IR ritalin-$2.00 each
10mg IR ritalin-$1.5 each
30mg IR adderall-$3.00 each
20 mg IR adderall-$2.00 each
Percocet 5mg-round white- $3.00each
Percs 10mg-oblong with name percocet on one side-$6.00 each
Morphine-$11 each
Dilaudid 8mg-$6 each
Dilaudid 4mg-$3 each
Xannies (White and yellow Bars)-$3.00 each
Roxi 30 blues-$9.00 each-sale!!
OC 80's-$15.00 each
Text/Call/Whatsapp:+1(443) 281-3429(https://uploads.tapatalk-cdn.com/20200213/7ba8a9bb6afb1110c3aafd18c32217e2.jpg)
Sent from my SM-J320F using Tapatalk
-
WHATSAPP/TEXT/CALL:+1(443) 281-3429
Ketamine 250grams :$450 + Delivery.
Vyvanse 70 mg $5 Per pill
Hydros Yellows: 10/325-$4.50 each
Hydros Blues 10/500-$3.50 Each
30mg IR ritalin-$3.00 each
20 mg IR ritalin-$2.00 each
10mg IR ritalin-$1.5 each
30mg IR adderall-$3.00 each
20 mg IR adderall-$2.00 each
Percocet 5mg-round white- $3.00each
Percs 10mg-oblong with name percocet on one side-$6.00 each
Morphine-$11 each
Dilaudid 8mg-$6 each
Dilaudid 4mg-$3 each
Xannies (White and yellow Bars)-$3.00 each
Roxi 30 blues-$9.00 each-sale!!
OC 80's-$15.00 each
Text/Call/Whatsapp:+1(443) 281-3429
Sent from my SM-J320F using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The bike was laid down by the previous owner, so it has a broken heat shield on the muffler, and some fairly minimal scratching. The side cover on the right side is cracked from the application of my big right foot (I'm disabled, and misjudged).
I love this scooter, and it's been my sole form of transportation for the last several months. It had 3500 miles on it when I bought it last May. I'm only selling it to buy a smaller scooter, as it won't be my only transportation any longer.
$2000 cash, and it's located in Perryville, Arkansas. I'll post more pics ASAP.(https://uploads.tapatalk-cdn.com/20200308/67b66f29062efd533a472f783cbacd69.jpg)
Sent from my moto x4 using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The bike was laid down by the previous owner, so it has a broken heat shield on the muffler, and some fairly minimal scratching. The side cover on the right side is cracked from the application of my big right foot (I'm disabled, and misjudged).
I love this scooter, and it's been my sole form of transportation for the last several months. It had 3500 miles on it when I bought it last May. I'm only selling it to buy a smaller scooter, as it won't be my only transportation any longer.
$2000 cash, and it's located in Perryville, Arkansas. I'll post more pics ASAP.(https://uploads.tapatalk-cdn.com/20200308/67b66f29062efd533a472f783cbacd69.jpg)
Sent from my moto x4 using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The .
Sent from my moto x4 using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The .
Sent from my moto x4 using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The scooter was laid down by the previous owner, and has a broken heat shield on the muffler, as well as fairly minimal scratching. It has a cracked side cover as a result of the application of my big right foot. I'm disabled, and misjudged.
I love this scooter, and it's been my sole form of transportation for the last several months. It had 3500 miles when I bought it last May. I'm only selling it to buy a smaller scooter, since it now won't be my only form of transportation.
I'm asking $2000 cash, and it's located in Perryville, Arkansas. I'll add store pics ASAP.(https://uploads.tapatalk-cdn.com/20200308/8e9a63279e3b45554bdbcda9fb99c435.jpg)
Sent from my moto x4 using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The scooter was laid down by the previous owner, and has a broken heat shield on the muffler, as well as fairly minimal scratching. It has a cracked side cover as a result of the application of my big right foot. I'm disabled, and misjudged.
I love this scooter, and it's been my sole form of transportation for the last several months. It had 3500 miles when I bought it last May. I'm only selling it to buy a smaller scooter, since it now won't be my only form of transportation.
I'm asking $2000 cash, and it's located in Perryville, Arkansas. I'll add store pics ASAP.
Sent from my moto x4 using Tapatalk
-
I've decided to sell my 500Ri ABS. It's pearl white, with about 8800 miles, and it has a large Shad top case, a new Givi touring windshield, bar end mirrors, red short billet levers, and a custom backrest made from the butt pad. I have new tires, front and rear, that I'm going to have mounted this week.
The scooter was laid down by the previous owner, and has a broken heat shield on the muffler, as well as fairly minimal scratching. It has a cracked side cover as a result of the application of my big right foot. I'm disabled, and misjudged.
I love this scooter, and it's been my sole form of transportation for the last several months. It had 3500 miles when I bought it last May. I'm only selling it to buy a smaller scooter, since it now won't be my only form of transportation.
I'm asking $2000 cash, and it's located in Perryville, Arkansas. I'll add store pics ASAP.
Sent from my moto x4 using Tapatalk
-
Test(https://uploads.tapatalk-cdn.com/20200308/fc4fa747e0f05d94eceafa4315598f46.jpg)
Sent from my moto x4 using Tapatalk
-
Scoot died on me in the middle of the road last week. Luckily I was going downhill, so coasted to the first bus stop.
Lights were on, the engine was turning.
Took the cover to see the spark plug. The connector was off, and the plug was loose???
Didn't touch the plug since it was put in last Summer.
Unscrewed the plug completely (hot!), and it looked ok, light brown color.
Screwed it back in, connector on, has to fire up immediately, right?
Well...no...
Out of ideas at the time, and no tools, left it there, and called a friend with a van to pick it up and bring it home.
The next day took the Tupperware off and put in a new plug just to be sure. Didn't start.
Checked the fuel flow, and it was ok. The engine was turning so it had to be something electrical.
Had an ignition coil at hand, so tried changing that. Fired right up!
Couldn't see anything unusual on the faulty coil, but it wasn't working.
Can't find a connection between the loose plug, plug connector being off, and coil failing at the same time. Anybody have an idea?
Since the plastics were off did a valve check.
(https://uploads.tapatalk-cdn.com/20200309/6369c7c88131115fadcb2c7082a5121c.jpg)
Sent from my Redmi 4 using Tapatalk
-
Scoot died on me in the middle of the road last week. Luckily I was going downhill, so coasted to the first bus stop.
Lights were on, the engine was turning.
Took the cover to see the spark plug. The connector was off, and the plug was loose???
Didn't touch the plug since it was put in last Summer.
Unscrewed the plug completely (hot!), and it looked ok, light brown color.
Screwed it back in, connector on, has to fire up immediately, right?
Well...no...
Out of ideas at the time, and no tools, left it there, and called a friend with a van to pick it up and bring it home.
The next day took the Tupperware off and put in a new plug just to be sure. Didn't start.
Checked the fuel flow, and it was ok. The engine was turning so it had to be something electrical.
Had an ignition coil at hand, so tried changing that. Fired right up!
Couldn't see anything unusual on the faulty coil, but it wasn't working.
Can't find a connection between the loose plug, plug connector being off, and coil failing at the same time. Anybody have an idea?
Since the plastics were off also did a valve check.
Sent from my Redmi 4 using Tapatalk
-
I'm having problem with my scooter starting
Sent from my Coolpad 3310A using Tapatalk
-
I'm having problem with my scooter starting
Sent from my Coolpad 3310A using Tapatalk
-
Problem getting it started
Sent from my Coolpad 3310A using Tapatalk
-
I've rebuilt the carburetor checked the reed valves..and.. still won't run help Thanks...
Sent from my SM-A505U using Tapatalk
-
I'm getting a big bore kit for a 2015 kymco agility 50 4 stroke. what valve size should the kit be for?
Sent from my QS5509A using Tapatalk
-
I'm getting a big bore kit for a 2015 kymco agility 50 4 stroke. what valve size should the kit be for?
Sent from my QS5509A using Tapatalk
-
I'm getting a big bore kit for a 2015 kymco agility 50 4 stroke. what valve size should the kit be for?
Sent from my QS5509A using Tapatalk
-
I'm getting a big bore kit for a 2015 kymco agility 50 4 stroke. what valve size should the kit be for?
Sent from my QS5509A using Tapatalk
-
I'm getting a big bore kit for a 2015 kymco agility 50 4 stroke. what valve size should the kit be for?
(http://)
Sent from my QS5509A using Tapatalk
-
I'm getting a big bore kit for a 2015 kymco agility 50 4 stroke. what valve size should the kit be for?
Sent from my QS5509A using Tapatalk
-
Hey I am having trouble keeping my seat locked. When I am ridding I can feel the seat pop up and also with the right tug I can open it without a key.
I was just going to replace the assembly but I can't seem to find the part for my bike or if someone know how to adjust it?
Thanks for your help!!
2009 Kymco Super 8 150cc.
Sent from my SM-G950U using Tapatalk
-
Hey I am having trouble keeping my seat locked. When I am ridding I can feel the seat pop up and also with the right tug I can open it without a key.
I was just going to replace the assembly but I can't seem to find the part for my bike or if someone know how to adjust it?
Thanks for your help!!
2009 Kymco Super 8 150cc.
Sent from my SM-G950U using Tapatalk
-
Hey I am having trouble keeping my seat locked. When I am ridding I can feel the seat pop up and also with the right tug I can open it without a key.
I was just going to replace the assembly but I can't seem to find the part for my bike or if someone know how to adjust it?
Thanks for your help!!
2009 Kymco Super 8 150cc.
Sent from my SM-G950U using Tapatalk
-
Hey I am having trouble keeping my seat locked. When I am ridding I can feel the seat pop up and also with the right tug I can open it without a key.
I was just going to replace the assembly but I can't seem to find the part for my bike or if someone know how to adjust it?
Thanks for your help!!
2009 Kymco Super 8 150cc.
Sent from my SM-G950U using Tapatalk
-
Are there lift kits available for these? Looking for a 2" lift and i want to run at least 27" tires for some clearance. Help! Love this machine so far but finding aftermarket parts is more challenging than expected.
Sent from my SM-N960U using Tapatalk
-
Are there lift kits available for these? Looking for a 2" lift and i want to run at least 27" tires for some clearance. Help! Love this machine so far but finding aftermarket parts is more challenging than expected.
Sent from my SM-N960U using Tapatalk
-
Are there lift kits available for these? Looking for a 2" lift and i want to run at least 27" tires for some clearance. Help! Love this machine so far but finding aftermarket parts is more challenging than expected.
Sent from my SM-N960U using Tapatalk
-
Are there aftermarket replacements for the tie rods on a 2013 mxu 450i? 4 machines all broke 1 side and our dealership is having a hard time gettting them. Help!
Sent from my SM-N960U using Tapatalk
-
A nice Sunday ride to work after a few rainy and very windy days.(https://uploads.tapatalk-cdn.com/20200607/8a8cdf5ef2f1019818a3059158a46776.jpg)(https://uploads.tapatalk-cdn.com/20200607/99836cc2107b33577d2e65e909699019.jpg)
Sent from my Redmi 4 using Tapatalk
-
On the way to work after a few rainy and windy days.(https://uploads.tapatalk-cdn.com/20200607/4a6b938e7cedc5776e9694aa7069c68b.jpg)
Sent from my Redmi 4 using Tapatalk
-
On the way to work after a few rainy and windy days.(https://uploads.tapatalk-cdn.com/20200607/efb3dd480abc5d9f1b54d4f3e11dcd6f.jpg)
Sent from my Redmi 4 using Tapatalk
-
On the way to work after a few rainy and windy days.(https://uploads.tapatalk-cdn.com/20200607/efb3dd480abc5d9f1b54d4f3e11dcd6f.jpg)
Sent from my Redmi 4 using Tapatalk
-
]On the way to work after a few rainy and windy days.(https://uploads.tapatalk-cdn.com/20200607/efb3dd480abc5d9f1b54d4f3e11dcd6f.jpg)
Sent from my Redmi 4 using Tapatalk
-
On the way to work after a few rainy and windy days.(https://uploads.tapatalk-cdn.com/20200607/a72177e963fadaca759bfb61db132725.jpg)
Sent from my Redmi 4 using Tapatalk
-
I'm selling my 2009 XCiting 500Ri ABS 8940 miles, new Givi windshield in December, Shad SH45 top case, short billet levers, bar end mirrors. Previous owner dropped it on the right side and cracked the plastic heat shield on the muffler. I broke the right side cover with my big right foot. I live the scooter, but it's not my primary transportation anymore, and with my disabilities, i'd ike to downsize.
I have two new tires for it. If I have them mounted, the price is $2000. If I give you the tires and you have them mounted, the price is $1800.
Located in Perryville, Arkansas. PM if you're interested.
Sent from my moto g power using Tapatalk
-
I bought gianelli go to my super 9 lc but it didn't fit because of that other swing arm.
Does anyone know what exhaust should i get that fits?
Sent from my Redmi Note 8 Pro using Tapatalk
-
I bought gianelli go to my super 9 lc but it didn't fit because of that other swing arm.
Does anyone know what exhaust should i get that fits?
Sent from my Redmi Note 8 Pro using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/e8de266ccd902c081b09e85641d0b2f3.jpg)(https://uploads.tapatalk-cdn.com/20200707/5eeda9e72b48466e62c3301673aa265b.jpg)(https://uploads.tapatalk-cdn.com/20200707/d3b9b92eaaac8cd393a7485c2aff4ae7.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/e8de266ccd902c081b09e85641d0b2f3.jpg)(https://uploads.tapatalk-cdn.com/20200707/5eeda9e72b48466e62c3301673aa265b.jpg)(https://uploads.tapatalk-cdn.com/20200707/d3b9b92eaaac8cd393a7485c2aff4ae7.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/e8de266ccd902c081b09e85641d0b2f3.jpg)(https://uploads.tapatalk-cdn.com/20200707/5eeda9e72b48466e62c3301673aa265b.jpg)(https://uploads.tapatalk-cdn.com/20200707/d3b9b92eaaac8cd393a7485c2aff4ae7.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/e8de266ccd902c081b09e85641d0b2f3.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/d8d36fd2a8687bbe035a0226bcc5c8ee.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/2285e49477e1c1729e5a7652008f5a1e.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!(https://uploads.tapatalk-cdn.com/20200707/aeaa8d4d48eeb259296c6f0047d3b71a.jpg)
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roog let me know!
Sent from my SM-N960U using Tapatalk
-
Heres my 2016 700 i just purcjased brand new in may (dealer had leftovers from another dealers foreclosure). Very impressed over all but finding aftermarket parts for a 700 is next to impossible.
Mods so far:
Clearly tough folding windshield
Shockpro full doors
Shockpro rear window
Polaris 3500lb winch
Led headlights
Homemade roof
4g kolpin gas can with mounts in bed
Cheapo ebay mirrors
28" mudlite tires
Will be adding a 40" lightbar, led pods (both front and rear), stereo, and windshield wiper
Would love to find a 2" lift and a better roof but they're proving harder to come by.
Pic was taken this weekend at 4 corners in Eureka, AK. Rolling with a 4 seater turbo rzr, highlifter rzr, and ranger. Kept up just fine all weekend.
If you've got leads on a lift kit or roof let me know!(https://uploads.tapatalk-cdn.com/20200707/dcb7a42d68bbff991630900eb075f762.jpg)
Sent from my SM-N960U using Tapatalk
-
Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot. (https://uploads.tapatalk-cdn.com/20200708/0c5b5ba541ac5196230c05165b1b9b3c.jpg)(https://uploads.tapatalk-cdn.com/20200708/d958223caeb3d787f952ad1b0ef958c6.jpg)(https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/d722e00b1ba103d8df715e878d390054.jpg)(https://uploads.tapatalk-cdn.com/20200708/8164c2fc45a44129f9f4919eb3d902b6.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)
Sent from my SM-N975U using Tapatalk
-
Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot. (https://uploads.tapatalk-cdn.com/20200708/0c5b5ba541ac5196230c05165b1b9b3c.jpg)(https://uploads.tapatalk-cdn.com/20200708/d958223caeb3d787f952ad1b0ef958c6.jpg)(https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/d722e00b1ba103d8df715e878d390054.jpg)(https://uploads.tapatalk-cdn.com/20200708/8164c2fc45a44129f9f4919eb3d902b6.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)
Sent from my SM-N975U using Tapatalk
-
(https://uploads.tapatalk-cdn.com/20200708/0c5b5ba541ac5196230c05165b1b9b3c.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)(https://uploads.tapatalk-cdn.com/20200708/d958223caeb3d787f952ad1b0ef958c6.jpg)(https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/d722e00b1ba103d8df715e878d390054.jpg)(https://uploads.tapatalk-cdn.com/20200708/8164c2fc45a44129f9f4919eb3d902b6.jpg)Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot.
Sent from my SM-N975U using Tapatalk
-
Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot. (https://uploads.tapatalk-cdn.com/20200708/0c5b5ba541ac5196230c05165b1b9b3c.jpg)(https://uploads.tapatalk-cdn.com/20200708/d958223caeb3d787f952ad1b0ef958c6.jpg)(https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/8164c2fc45a44129f9f4919eb3d902b6.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)
Sent from my SM-N975U using Tapatalk
-
Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot. (https://uploads.tapatalk-cdn.com/20200708/0c5b5ba541ac5196230c05165b1b9b3c.jpg)(https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/8164c2fc45a44129f9f4919eb3d902b6.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)
Sent from my SM-N975U using Tapatalk
-
Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot. (https://uploads.tapatalk-cdn.com/20200708/0c5b5ba541ac5196230c05165b1b9b3c.jpg)(https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)
Sent from my SM-N975U using Tapatalk
-
Bought my 1st ever ATV used with 60 hours/370 miles.
Took it riding at the hunt club and it went well, in the end over some bumps i heard something loose rattling behind the cover. Got it home and took it apart. Found a couple of pins in the bottom of the cover. Took out that clutch of whatever it is and found where the pins go. Now looks like there's some bearings missing too, correct?? Can i buy those somewhere? How should i proceed?
Thanks a lot. (https://uploads.tapatalk-cdn.com/20200708/56ce2fbef371f4370cd8b990c21e72ef.jpg)(https://uploads.tapatalk-cdn.com/20200708/2982b86213656143bcd3136e35c22436.jpg)(https://uploads.tapatalk-cdn.com/20200708/11c43a4ffb9342f534271ff26988fb8d.jpg)
Sent from my SM-N975U using Tapatalk
-
I installed tecnigas next r exhaust and it doesn't do wheelies anymore because the peak power is so high that i cant lift it anymore.
Should i change variator rolls to get peak power to lower rpm?
Sent from my Redmi Note 8 Pro using Tapatalk
-
I installed tecnigas next r exhaust and it doesn't do wheelies anymore because the peak power is so high that i cant lift it anymore.
Should i change variator rolls to get peak power to lower rpm?
Sent from my Redmi Note 8 Pro using Tapatalk
-
I installed tecnigas next r exhaust and it doesn't do wheelies anymore because the peak power is so high that i cant lift it anymore.
Should i change variator rolls to get peak power to lower rpm?
Sent from my Redmi Note 8 Pro using Tapatalk
-
I installed tecnigas next r exhaust and it doesn't do wheelies anymore because the peak power is so high that i cant lift it anymore.
Should i change variator rolls to get peak power to lower rpm? (https://uploads.tapatalk-cdn.com/20200727/92a8b6104c71cb3d828d1a0010b0d250.jpg)
Sent from my Redmi Note 8 Pro using Tapatalk
-
I installed tecnigas next r exhaust and it doesn't do wheelies anymore because the peak power is so high that i cant lift it anymore.
Should i change variator rolls to get peak power to lower rpm? (https://uploads.tapatalk-cdn.com/20200727/92a8b6104c71cb3d828d1a0010b0d250.jpg)
Sent from my Redmi Note 8 Pro using Tapatalk
-
I installed tecnigas next r exhaust and it doesn't do wheelies anymore because the peak power is so high that i cant lift it anymore.
Should i change variator rolls to get peak power to lower rpm? (https://uploads.tapatalk-cdn.com/20200727/92a8b6104c71cb3d828d1a0010b0d250.jpg)
Sent from my Redmi Note 8 Pro using Tapatalk
-
I have a question is super 8 and agility use same belt? and what I'm do I need to change. And agility engine parts suitable for super 8
Casper_S38 cihaz?mdan Tapatalk kullan?larak gönderildi
-
I have a question is super 8 and agility use same belt? and what I'm do I need to change. And agility engine parts suitable for super 8
Casper_S38 cihaz?mdan Tapatalk kullan?larak gönderildi
-
I have a question is super 8 and agility use same belt? and what I'm do I need to change. And agility engine parts suitable for super 8
Casper_S38 cihaz?mdan Tapatalk kullan?larak gönderildi
-
I have a question is super 8 and agility use same belt? and what I'm do I need to change. And agility engine parts suitable for super 8
Casper_S38 cihaz?mdan Tapatalk kullan?larak gönderildi
-
2016 uxv 700...lost my key! Dealer doesnt have a replacement, whats the easiest way to get a replacement asap!
Sent from my SM-N960U using Tapatalk
-
Does anyone know where i can get tail light assembly so i can sell my kymco?
I live in finland(https://uploads.tapatalk-cdn.com/20200909/28d419635ffa46479980accffe65da34.jpg)
Sent from my Redmi Note 8 Pro using Tapatalk
-
Does anyone know where i can get tail light assembly so i can sell my kymco?
I live in finland. (https://uploads.tapatalk-cdn.com/20200909/28d419635ffa46479980accffe65da34.jpg)
Sent from my Redmi Note 8 Pro using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/afc36e28c6aa586f6caa98a08af49350.jpg)(https://uploads.tapatalk-cdn.com/20200919/251fa331f7e76f7c0f7462956bf150bb.jpg)(https://uploads.tapatalk-cdn.com/20200919/dd06000b80317cb731688a2ef0a1ec66.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/afc36e28c6aa586f6caa98a08af49350.jpg)(https://uploads.tapatalk-cdn.com/20200919/251fa331f7e76f7c0f7462956bf150bb.jpg)(https://uploads.tapatalk-cdn.com/20200919/dd06000b80317cb731688a2ef0a1ec66.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/afc36e28c6aa586f6caa98a08af49350.jpg)(https://uploads.tapatalk-cdn.com/20200919/251fa331f7e76f7c0f7462956bf150bb.jpg)(https://uploads.tapatalk-cdn.com/20200919/dd06000b80317cb731688a2ef0a1ec66.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/afc36e28c6aa586f6caa98a08af49350.jpg)(https://uploads.tapatalk-cdn.com/20200919/251fa331f7e76f7c0f7462956bf150bb.jpg)(https://uploads.tapatalk-cdn.com/20200919/dd06000b80317cb731688a2ef0a1ec66.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/35cba7f9e7f89e687a559fe57eb4e014.jpg)(https://uploads.tapatalk-cdn.com/20200919/3bfbc3cc401964a6e5c473a21528dc18.jpg)(https://uploads.tapatalk-cdn.com/20200919/2f98070bef7b30e8b8c119e8c36cb7bd.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/35cba7f9e7f89e687a559fe57eb4e014.jpg)(https://uploads.tapatalk-cdn.com/20200919/3bfbc3cc401964a6e5c473a21528dc18.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.(https://uploads.tapatalk-cdn.com/20200919/35cba7f9e7f89e687a559fe57eb4e014.jpg)
Sent from my Pixel 2 XL using Tapatalk
-
Installed a new Regulator Rectifier today, purchased from Rick's Motorsport Electrics. Old one burned up big time.
Sent from my Pixel 2 XL using Tapatalk
-
How can I get the seat open? I can jack up the entire seat from the front (that is, I can see the carb and battery), but it's still attached / latched at the back.
Sent from my ONEPLUS A6013 using Tapatalk
-
How can I get the seat open? I can jack up the entire seat from the front (that is, I can see the carb and battery), but it's still attached / latched at the back.
Sent from my ONEPLUS A6013 using Tapatalk
-
How can I get the seat open? I can jack up the entire seat from the front (that is, I can see the carb and battery), but it's still attached / latched at the back.
Sent from my ONEPLUS A6013 using Tapatalk
-
How can I get the seat open? I can jack up the entire seat from the front (that is, I can see the carb and battery), but it's still attached / latched at the back.
Sent from my ONEPLUS A6013 using Tapatalk
-
Need help diagnosing problem. It doesn't start unless it's warm top speeds only 35 mph no acceleration from the start it's about it(https://uploads.tapatalk-cdn.com/20201011/f28ff2c58b646b234f38c6a169e5ffd5.jpg)
Sent from my moto z4 using Tapatalk
-
Need help diagnosing problem. It doesn't start unless it's warm top speeds only 35 mph no acceleration from the start it's about it(https://uploads.tapatalk-cdn.com/20201011/f28ff2c58b646b234f38c6a169e5ffd5.jpg)
Sent from my moto z4 using Tapatalk
-
Need help diagnosing problem. It doesn't start unless it's warm top speeds only 35 mph no acceleration from the start it's about ithttp://(https://uploads.tapatalk-cdn.com/20201011/f28ff2c58b646b234f38c6a169e5ffd5.jpg)
Sent from my moto z4 using Tapatalk
-
Our Whatsapp or Text or Call:+1(443)-281-3429 to fasten communication.We have Xanax,Adderall,Vyvanse,Oxycodone,Ketamine,Roxycodone pills for sale .
Email:pamelawilliam02@gmail.com(https://uploads.tapatalk-cdn.com/20201011/ddb70c6906bf943d15da2d15ef97e25a.jpg)
Sent from my SM-J320F using Tapatalk
-
Our Whatsapp or Text or Call:+1(443)-281-3429 to fasten communication.We have Xanax,Adderall,Vyvanse,Oxycodone,Ketamine,Roxycodone pills for sale .
Email:pamelawilliam02@gmail.com(https://uploads.tapatalk-cdn.com/20201011/ddb70c6906bf943d15da2d15ef97e25a.jpg)
Sent from my SM-J320F using Tapatalk
-
Our Whatsapp or Text or Call:+1(443)-281-3429 to fasten communication.We have Xanax,Adderall,Vyvanse,Oxycodone,Ketamine,Roxycodone pills for sale .
Email:pamelawilliam02@gmail.com(https://uploads.tapatalk-cdn.com/20201011/ddb70c6906bf943d15da2d15ef97e25a.jpg)
Sent from my SM-J320F using Tapatalk
-
Our Whatsapp or Text or Call:+1(443)-281-3429 to fasten communication.We have Xanax,Adderall,Vyvanse,Oxycodone,Ketamine,Roxycodone pills for sale .
Sent from my SM-J320F using Tapatalk
-
Why is Polini telling me that my 2T variator i bought for my Super 8 50 2t not work on my Agility 50 4t ? I believed them to be the same...
Sent from my LM-K500 using Tapatalk
-
Why is Polini telling me that my 2T variator i bought for my Super 8 50 2t not work on my Agility 50 4t ? I believed them to be the same...
Sent from my LM-K500 using Tapatalk
-
Why is Polini telling me that my 2T variator i bought for my Super 8 50 2t not work on my Agility 50 4t ? I believed them to be the same...
Sent from my LM-K500 using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power as if I was letting go of the throttle. Now it don't even stay on so I don't know where to start can anyone help please[emoji119][emoji119]
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power as if I was letting go of the throttle. Now it don't even stay on so I don't know where to start can anyone help please[emoji119][emoji119]
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power as if I was letting go of the throttle. Now it don't even stay on so I don't know where to start can anyone help please[emoji119][emoji119]
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power as if I was letting go of the throttle. Now it don't even stay on so I don't know where to start can anyone help please[emoji119][emoji119]
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power as if I was letting go of the throttle. Now it don't even stay on so I don't know where to start can anyone help please[emoji119][emoji119]
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power as if I was letting go of the throttle. Now it don't even stay on so I don't know where to start can anyone help please[emoji119][emoji119]
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph. It would get to speed and then lose power.
Sent from my SM-G955U using Tapatalk
-
My Grandvista250 has all of a sudden stopped wanting to accelerate. I was getting on the freeway and it wouldn't so faster then 55 mph.
Sent from my SM-G955U using Tapatalk
-
I was experiencing on the freeway when I got to 55mph it was losing power as if I was letting go of the throttle and now it won't stay on. Can anyone help me with this. Fuel filter and spark plug are new
Sent from my SM-G955U using Tapatalk
-
I was experiencing on the freeway when I got to 55mph it was losing power as if I was letting go of the throttle and now it won't stay on. Can anyone help me with this. Fuel filter and spark plug are new
Sent from my SM-G955U using Tapatalk
-
I was experiencing on the freeway when I got to 55mph it was losing power as if I was letting go of the throttle and now it won't stay on. Can anyone help me with this. Fuel filter and spark plug are new
Sent from my SM-G955U using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02v, new plug, still no spark. Kill switch checks out.
Sent from my SM-T900 using Tapatalk
-
Ive got a 2016 Kymco agility 50 dc cdi getting a negative reading from the B/Y wire on cdi the black wire on the 2 pin is 12.83v , Cdi pickup coil reads .02. New coil, new dc cdi. New dc stator, all lights work. The cdi wires 2 pin black 12.80v, 4 wire plug B/Y WIRE to coil
Key on, comes up with a - reading, The blue wire that goes to pick up coil .02 new plug, still no spark.
Sent from my SM-T900 using Tapatalk
-
So im going to build the most powerful kymco s9 lc that money can buy.
If you are willing to help me to find perfect parts for it add me on instagram and dm me there
My instagram is: benjaminlehtoo
(https://uploads.tapatalk-cdn.com/20210118/e34da4f93adfa40c0f4e9b56349b9353.jpg)
Sent from my Redmi Note 8 Pro using Tapatalk
-
So im going to build the most powerful kymco s9 lc that money can buy.
If you are willing to help me to find perfect parts for it add me on instagram and dm me there
My instagram is: benjaminlehtoo
Sent from my Redmi Note 8 Pro using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.(https://uploads.tapatalk-cdn.com/20210214/170ec2dc65452cdc5eeb31072ae9d6fa.jpg)
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
I have a new agilty r16+.I have been having problems starting the machine.
Today I tried to to start it four times eventually started but celp light stayed on.I got it home turned off engine started up machine celp stayed on.Turned it off started engine again now celp is off.
Any help or advice on this please.
Sent from my SM-A202F using Tapatalk
-
Have a new agility city 125i.Had starting issues.Celp stays on after getting it started.Any advice please.
Sent from my SM-A202F using Tapatalk
-
Have a new agility city 125i.Had starting issues.Celp stays on after getting it started.Any advice please.
Sent from my SM-A202F using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldnt even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. Any suggestions or advice would be greatly appreciated.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldnt even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. Any suggestions or advice would be greatly appreciated.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldnt even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. Any suggestions or advice would be greatly appreciated.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldnt even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. Any suggestions or advice would be greatly appreciated.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. Any suggestions or advice would be greatly appreciated.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. (http://)
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid. (http://[URL][/URL])
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
I recently purchased a 2003 lc super 9. Had to buy new cdi box to get it running. It would set and idle all day long but when i take it out for a drive it dies out after 10 to 15 minutes of riding and will not start back up unless i used starting fluid. So after the third time of only getting 10 minutes of drive time it wouldn't even attempt to start even with starting fluid. i disassembled the carb and cleaned it real good then reassembled. it still won't hit a lick even with the starting fluid.
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?(https://media3.giphy.com/media/mPytjcsG3XS4o/giphy.gif?cid=349c9dd7loflrsiatsn6pwl9vmvzgouwoj7jiz3dgk7j5ihj&rid=giphy.gif)
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?(https://media3.giphy.com/media/mPytjcsG3XS4o/giphy.gif?cid=349c9dd7loflrsiatsn6pwl9vmvzgouwoj7jiz3dgk7j5ihj&rid=giphy.gif)
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?
Sent from my LM-K500 using Tapatalk
-
Recently bought a 2003 super 9. After replacing the cdi box i managed to get it running. Idled fine for a good hour before i took it out on the road. But after about 10 minutes of drive time it would die and would not start back up without the help of starting fluid. After the third stall out it wouldn't even start back up with starting fluid. I took apart the carb and cleaned it then put it back on and still no luck getting it started even with starting fluid. Any ideas?
Sent from my LM-K500 using Tapatalk
-
2003 super 9 wont even attempt to start even with use of starting fluid. I have spark.
Sent from my LM-K500 using Tapatalk
-
Super 9 wont start even when using starting fluid.
Sent from my LM-K500 using Tapatalk