Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - juancuesta

Pages: 1 2 [3] 4
31
My bad! Wow 2000 km... not much at all! :o :o

32
Xciting 250 / Re: Clutch/Variator noise
« on: May 15, 2016, 07:15:00 AM »
Bendix? What is that?!

33
Xciting 250 / Re: Clutch/Variator noise
« on: May 11, 2016, 04:13:20 PM »
I might have found a solution. Today I replaced the three little plastic pieces that holds the rollers cover , within the variator. On top of that I tight up the variator screw very well.( I think last time it wasnt tight enough). Now the noise seems to be much lighter, althought not completly gone

http://www.martimoto.net/_kw_image/martimoto.net/catalog/catalog_product/037802.jpg

34
Yes, I realized about the warning light , but still dont undersand why it lights up every 2000Km when its its supposed to be changed every 3000


35
Yes, so , acording to the user manual , I must changed every 3000 km, however I have read somewhere that its every 5000 km , not sure really...

36
Xciting 250 / Re: Clutch/Variator noise
« on: May 10, 2016, 05:44:59 AM »
I replace the belt about two days ago. So I doubt it's the belt... I guess is normal in this bike, although weird!

37
Xciting 250 / Clutch/Variator noise
« on: May 09, 2016, 10:59:29 AM »


I have the exact same problem as shown in this video. Looking for an answer...

38
Xciting 250 / Re: Loses power at or near WOT
« on: May 08, 2016, 05:37:32 AM »
Defective CDI?

39
Xciting 250 / Re: When to change variator rollers?
« on: May 06, 2016, 04:47:15 PM »
Today I replaced the variator rollers and the belt.  The old belt had 9900 km on it and it didn't look bad, how ever I can confirm that after replacing these two components my top speed has increased about 15-20 kph.  All that was mentioned before by forbes user is exactly right and matches my readings too!

I'm happy with the improvement :) I'm guess that the belt stretched?!

40
Xciting 250 / Re: When to change variator rollers?
« on: May 04, 2016, 04:57:53 PM »
By the way, what is the nut size that holds the variator? /clutch?

41
Xciting 250 / Dpr7ea-9 vs Dpr6ea-9
« on: May 03, 2016, 07:19:18 AM »
I have now realized that my scooter is an AFI model . Until today I was sure it was non AFI model.
When reading the user manual I saw that the recommended plug for the Non AFI model is the Dpr6ea-9 , and that's the one I bought and the one I use.

My question is, are there any substantial differences ? Should I buy the recommended plug(Dpr6ea-9) for the AFI model as it specifies in the user manual?

Thanks!

42
Thanks for the clarification!

43
Xciting 250 / Difference between Xciting 250 AFI and Xciting 250
« on: May 03, 2016, 07:01:10 AM »
Is there any difference in between those two models?
How can I identify which one I have?

Thanks!

44
Xciting 250 / Re: When to change variator rollers?
« on: April 17, 2016, 01:18:08 PM »
Chaning the belt can make a difference in top speed?

45
Xciting 250 / Re: When to change variator rollers?
« on: April 17, 2016, 11:31:14 AM »
5592 Miles
No previous speed I know since I bought the scooter in this condition.
What made me thought was, seeing the exact same model in the hightway cruising faster than I could!

Pages: 1 2 [3] 4