KymcoForum.com

Scooters - 50cc => People 50 => Topic started by: Amberturd on September 18, 2023, 12:33:03 PM

Title: Idle and air mixture adjustment for People 50
Post by: Amberturd on September 18, 2023, 12:33:03 PM

Hello,

I have recently bought my People 50, previous owner messed up with carbs idle and air mixture and now I do not have base line for adjustment. Does anyone know if I twist both screws all the way in, how many turns out should i do for it to be optimal.

Thank You

Title: Re: Idle and air mixture adjustment for People 50
Post by: Ruffus on September 18, 2023, 08:14:42 PM

Welcome here!
Usually carefully all the way in, then 2 1/2 turns out again for a start. Try it to make it running.
- fuel mix in or out until HIGHEST revvs
- idle screw fixes revvs about 1800rpm
Check whether this little washer and O- ring are in front of spring.
Each motor is a little bit different, depending on age, use and several other parameters.