KymcoForum.com
Offroad => Side By Side => Topic started by: schambermerv on February 21, 2015, 09:04:45 PM
-
r.p.m. only goes to 4500 changed oil plug runs fine but no speed or power, can only get to 4500rpm in neutral Can someone help please
-
Did it sit for awhile? Check the spark plug? Compression test? air filter? fuel filter? exhaust bearings?
Welcome to the forum!!!
Fill us in a little bit more. What have you done to trouble shoot? Did this happen while riding? fell off a mountain?
;D ;D ;D
-
nope, use it everyday to feed horses, just changed oil and new plug and cleaned air filter, No change Thanks for the welcome :D
-
Then I would move to the fuel system. Pull the petcock, and remove the screen up in the tank. They get clogged real easily. Then add an In=line fuel filter, and pull the carb. You need a can of spray carb / brake clean. Pull it apart, and clear all the passages.
The jets / ports may be clogged.
The next thing is a compression test. Maybe a burnt or sticking valve. Maybe the valves just need an adjustment.
This should keep you busy for a minute.
Since it does run, it HAS to be somewhere in this list.
You're welcome for the welcome. Thanks for saying thanks! ;D
-
thanks Doesn't have a carb, fuel injected. Going to try compression test. If that isn't it think it could be the clutch. appreciate the insight
-
Can you post your findings after you do the compression test and such. I'm having the same troubles and can't figure out the problem
-
Hey just seeing if you ended up fixing the problem with your kymco?
-
Does it feel like a limiter at 4500? Maybe ignition coil is failing.
Sent from my iPhone using Tapatalk