Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - agilebda

Pages: 1 [2] 3 4 ... 27
16
People GT 300i / Re: Aftermarket Parts
« on: June 10, 2022, 01:04:41 PM »
Thanks guys,

Yeah a little skeptical about the belt for sure. It's amazing how the price is through the roof with the OEM belts.

17
People GT 300i / Aftermarket Parts
« on: May 27, 2022, 10:31:04 AM »
Hello Guys, I know this is a sticky option. Would you trust aftermarket parts from amazon?
https://www.amazon.com/dp/B07WT9523H/ref=cm_sw_r_apan_i_SBHSP2Q1P2N1P7QMNKTB

https://www.amazon.com/dp/B0081TGUHO/ref=cm_sw_r_apan_i_dl_ZBC97KBHTWPQ4TXYPP3P?_encoding=UTF8&psc=1



18
People GT 300i / Re: Need Help in Orlando-PLEASE
« on: April 09, 2022, 06:31:51 PM »
Had this issue on a scoot laying up for a while. Mechanic told me to change the battery. That system like voltage voltage voltage! Worked great after.

19
People GT 300i / Re: Rollers weight
« on: January 27, 2022, 07:31:52 PM »
Quote from: Ruffus on January 25, 2022, 10:44:04 AM
@Faber, since BANDO rollers are inexpensive, just have a try with even 15 grams (gives you a calm middle speed with low revs). Order several weights and put it in, then test ride. Mixed (i.g. 3x12 and 3x15 grams) is possible too. All depends on your personal likings.

The 125cc has large rollers. 15g are wayy too big for this scoot. Wouldn't have enough horsepower or torque to take off.

20
People GT 300i / Re: Rollers weight
« on: January 24, 2022, 11:35:58 PM »
I've had the GTI 125cc in the past. The roller weight is very sensitive. 10g is too light and 11 too heavy. 10.5 is the sweet spot for that scoot.

21
People GT 300i / Re: Oil Light Reset
« on: December 07, 2021, 12:45:22 AM »
Quote from: Ruffus on December 06, 2021, 07:18:43 PM
@Congrats, You found the well of eternal scooter youth.

Like a new boob job. Still same old body. Lol

22
People GT 300i / Re: Oil Light Reset
« on: December 05, 2021, 11:36:39 PM »
Thanks very much guys. All sorted and working fine. Quick swap over and now my scoot is half as young as she was with 27k on the ODO. LOL.

23
People GT 300i / Re: Oil Light Reset
« on: December 05, 2021, 05:27:58 PM »
I managed to find a spare speedo among my parts in the garage. I wonder if I swap out the actual push buttons and lens, would this work? Does the actual problem lie within the circuit board and not the buttons?

24
People GT 300i / Re: Oil Light Reset
« on: December 05, 2021, 05:02:52 PM »
Quote from: CROSSBOLT on December 05, 2021, 02:03:25 PM
Yes. New one starts at zero.
I will bet the lttle pushbuttons or one of them is not working. You may be able to find which one by operating them individually if you have not already. Both doing what they are supposed to may indicate your oil pressure switch is faulty.

The ADJ seems to be working. The MODE button not working. I'm lost....., what does this have to do with oil pressure?

25
People GT 300i / Re: Oil Light Reset
« on: December 05, 2021, 01:29:09 AM »
Quote from: CROSSBOLT on December 05, 2021, 01:26:03 AM
Not that I know of. You holding both down completely for an eternity?

Hi Karl. Yeah holding them down for like an entire minute and nothing happens.
If I purchase a new speedo, do I lose all of my ODO history?

26
People GT 300i / Oil Light Reset
« on: December 04, 2021, 11:33:51 PM »
Hello guys, I'm having trouble resetting the oil change light. Ususally I will press the ADJ button twice until I see the 5000k on the odometer then I will press the ADJ and MODE button together. I guess it's she's had her years of service on those buttons and they don't want to work anymore. Is there any other way that I can reset this function?

27
People GT 300i / Re: Voltage Issue
« on: November 27, 2021, 02:04:00 AM »
The wire didn't melt completely, but I'm sure that the hot exhaust header would have caused some interference somehow.

28
People GT 300i / Re: Voltage Issue
« on: November 26, 2021, 09:43:22 PM »
Negative lead ran directly from the battery to the engine casing to be grounded. The last mechanic must have done this without zip ties to run the cable neatly. Ground wire touched the exhaust header and melted away. I saw another GTI and decided to check out the wiring, and the ground wire ran from battery-frame (next to the coil) and then to the engine casing. So this means that it wasn't properly grounded which explains the electrical issues and decline in performance.

29
People GT 300i / Re: Voltage Issue
« on: November 26, 2021, 05:15:14 PM »
Thanks to all. Scoot running fantastic. Feels good to be back on the road. Ground wire was running from negative straight to engine casing ground. Thanks again to all you guys for the input and help. You are a great bunch of guys.

30
People GT 300i / Re: Voltage Issue
« on: November 20, 2021, 09:53:02 PM »
My electric route didn't look anything like this pic. LOL.

Pages: 1 [2] 3 4 ... 27