KymcoForum.com

Scooters - 50cc => Agility 50 => Topic started by: jesseg010 on June 02, 2017, 02:19:49 PM

Title: where are the bearings
Post by: jesseg010 on June 02, 2017, 02:19:49 PM

OK so when trying to start the bike there is a grinding noise.but when freely spinning the rear wheel the bike is off there is no noise and spins smoothly.
any ideas what's going on here?

Title: Re: where are the bearings
Post by: blue on June 04, 2017, 01:44:57 PM

check the starter bendix. see if the teeth on it is worn down. and also the elec. starter its self.