KymcoForum.com
Scooters - 50cc => Vitality 50 => Topic started by: Rico625 on September 12, 2012, 11:29:22 AM
-
Hi was my new Agility 50 Shipped with a derestricted kit ??
If so what does it consist of.
Thanks Rico
-
You don't say where you're calling from, but North American dealers derestrict before delivery. Don't know about Germany or Netherlands though; everything is restricted over there!
-
..derestricting consists of removing any cdi inhibitors and replacing the drive boss...
..the driven pulleys on the Agilitys are not restricted..
..however, I have seen carburetors that don't have air mix screws...that kinda sucks, since it means you gotta mod the carb if you want to upgrade to an open air intake...
-
My 2013 Agility's carb has a plug over the air mix screw that can be removed to gain access. But, the air mix screw is recessed in the hole & shaped like a 1/2 moon which makes adjusting it a bitch unless you have some kind of special tool.
-
My 2013 Agility's carb has a plug over the air mix screw that can be removed to gain access. But, the air mix screw is recessed in the hole & shaped like a 1/2 moon which makes adjusting it a bitch unless you have some kind of special tool.
You can take care of this with a dremel cutting wheel. If you get that cap off you can just cut a slit in the "D" screw and boom, you have an adjustable mixture screw. Another important thing about the new agilitys is the intake manifold comes with a very very restrictive washer plugging it. You can just pull it out, make sure you have the de-restricted main jet installed for this though.