Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - whiteknight

Pages: [1] 2
1
General Discussion / Hi how is everyone :D
« on: March 03, 2013, 01:08:08 AM »
Hi people, been a while since I've been here...a lots changed since I was last here new look and from what i can see a few new people. So i thought i would drop by and say Hi!! whiteknight checking in  ;D

2
General Discussion / no ones awake :(
« on: September 20, 2012, 04:33:53 AM »
Well im doing an all nighter waiting for my fiancee to get from work (im in the uk so its 5:32am)  no ones online.....im all alone in the kymco forum jungle.....hmmmm.....is there anyone out there??

3
Agility 50 / WOOOP!!!!
« on: September 19, 2012, 11:28:26 PM »
Right where to start....
i have put a new belt and rollers into the Ag72 and im able to get to 45..didnt get to 50 because there was traffic  >:( 

gonna put the Naraku spring back in because i think the spring thats there at the minute is too stiff and its hindering the acceleration and top speed.
will be pulling the clutch apart and replacing it along with the clutch bell and swapping the torque spring once i get some tools off of my father-in-law.

gonna post a vid very very soon (2morro) of the run up to 45+

4
Agility 50 / Light alloy wheels??
« on: September 08, 2012, 04:43:23 AM »
dont know if htis has already been asked but does anyone know of any companys that sell lightweight alloy wheels for scooters  ???

just brainstorming ideas to get the amount of weight the engine needs to haul to a minimum. dont wanna do much more to the engine because thats a screamer now (i actually feel self concious when i go WOT) all i can do is make the engines job easier.

BTW i cant seem to remember the rule of "sprung" and "unsprung" weight (sumone give me a refresh...please)......ah damn i always forget...i have goooooooooogle.....no worries.

5
Agility 50 / YES AT LAST....problem sorted!!
« on: September 01, 2012, 10:18:48 PM »
Right...i was having alot of trouble with my scoot emptying the fuel bowl far too quickly, couldn't get past 1/2 throttle without it gasping thru the filter because of fuel starvation. Anyway i've sorted the problem...finally.
i was running a too bigger jet and it was using far too much fuel and not allowing the bowl to refill.
swapped the jet to a #94 from a #96 and i can yank the throttle past 1/2 to WOT and she's screaming  ;D
just need to swap the old worn rollers for some new ones, get a new belt because my old one has seen better days and get my malossi clutch and stage 6 clutch bell fitted  ;D
she will be flying i tell ya
just leaves the exzuast and race crank to do.......im hyped to get this finished and see what she can do.

6
Agility 50 / last part of tuning
« on: August 19, 2012, 12:24:12 AM »
right, the engine is fully broken in but there is one thing that is holding her back.....the carb...
shes fine UP TO half throttle, beyond that its like hovering a straw above some coke in a cup and you get that shhheeerrrp noise. basicaly shes emptying the bowl before it can be filled up again. i cant change the float level because i will flood the carb, how should i go about sorting it out?
i did try and figure it out in my head but after a tonne of head scratching and smoking 100 rollies i gave up.
once the carb is tuned properly she will be able to go WOT and i can finally see what she can do.

7
General Discussion / WTF just happend????
« on: August 08, 2012, 12:42:51 AM »
right...where do i start.......

just got a txt from my younger sister saying that my step dad is going to give me his bike FOR NOTHING!!!

its a Suzuki VS V-twin Intruder 400cc

im still in a state of shock....and also a state of sadness (the agility might have to go  :'( )

8
General Discussion / sorry just a rant
« on: July 22, 2012, 01:43:10 AM »
Right so i was at work and i noticed a guy on a Agility 50, being as i had afew probs in the past i decided to ask how his agility was running and this is what happened....:-

Me "a'right hows your agility running mate?"

Guy, looking blankly at me says "Whats an agility??"

Me thinking is he having a laugh says "the silver scoot outside is it yours?"

Guy "oh the kymco?"

Me "yea its called an Agility, that happens to be the name of the bike"

Guy "oh i thought it was just a kymco"

after hearing this i just thought for f*cks sake what a tw*t how can you not know its called an agility when you ride the f*cking thing all day and not notice the letters on the side that say AGILITY!!!! what a gormless muvva fuc*er, your mum must have fu*ked a fruit!!

sorry rant over..

9
General Discussion / IM A HERO!!!!
« on: June 30, 2012, 12:45:44 PM »
hey look who's part of the prestigous club now  :D ;D :D ;D :D ;D

10
Agility 50 / got the rest of the parts...Norfolk Beast Part2
« on: June 27, 2012, 12:19:49 AM »
Right i plan to start work on the engine this coming thursday as i have a day off work and i will need a day to get it done properly.

now before you ask...yes there will be pics of the build as i do it. yes you will see me getting greasy and shi*ty i might even throw in a video for good measure.

watch this very short space.

11
Agility 50 / superkilla racing fan...for use with a soon to be dead 139QMB
« on: June 16, 2012, 06:55:19 PM »
i just saw a post about wrong jets being posted and such but i have also had a similar problem about them saying "for 139QMB engine" i recently bought a "racing fan" apparently for use with a 139QMB engine. when i received it i found somthing quite worrying... the fins on the fan point in the opposite direction.. now common sense says that if they go in the opposite direction then they will have the opposite affect to what the oem part did, affectivly "sucking" any air out of the cooling shroud and allowing the engine to heat up hotter than the sun and eventually fail. now i do believe the fins should be sucking the air in and not out because it needs to suck air in to the shroud to cool the engine. so i am going to devise a little plan to make a RAM type air intake so i can deliver the maximum amount cooling air to a larger cylinder head. in theory this should work a treat and i wouldnt have to change the fan for an inferior backwards working i want to f*** your engine type fan. who agrees with me?

12
General Discussion / Uber massive burger!!
« on: May 08, 2012, 12:13:43 AM »
YO!!! you know you want this burger....well you cant...i ate it  :P

13
General Discussion / WTF!!!
« on: May 07, 2012, 10:18:37 PM »
hey i just noticed.....im a Sr. Member!!!! whats going on there?? when did that magically appear? any clues as to why please drop me a line.








next stop HERO MEMBER!!!!     


maybe  ::)

14
General Discussion / ??????
« on: May 06, 2012, 12:37:17 AM »
HELLO!!!!

15
Agility 50 / nearly time to get the parts!!
« on: May 05, 2012, 01:15:35 AM »
Right after many MANY months of homework and planning and sorting where im getting the bits from i have finally sussed it all.

heres my goodies list:-

Naraku 80cc kit
Naraku race clutch
Naraku 18.5mm Carburettor
Either a Naraku or Leo Vince exhaust
Sports/race camshaft
HD Crank
K&N Air Filter
Iridium spark + High voltage ignition coil

these parts my mate Albert suggested:-
Racing fan
Valve stem oil seals x2
tensioner gasket x2
84/85/86 jets
2000 rpm torque spring

let me know what you think so far, if i have missed anything let me know or if you have any suggestions.

Pages: [1] 2