Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 2010Iron883

Pages: [1] 2 3 ... 8
1
Agility 125 / Re: Changing the final gears 2013 agility 125
« on: June 03, 2013, 10:51:04 AM »
Ok I appreciate your replys, but I bought this scooter brand new off the showroom floor and it has 17,000 k. I just don't see that I am overthinking. The virbration is there and it comes and goes , getting worse and better with diff rpms. When I am running50 or 55 and let off the fluttering happens then too. I was told at first that these engines where called KDU engine. Didn't understand that cause it has parts on it and a label that says gy6. Didn't know they made a 150. I live in the USA though.

2
Agility 125 / Re: I need a little info if someone can help . I need to know about some bolts
« on: June 02, 2013, 03:54:46 PM »
Sorry , I didn't realize till now I had 2 accounts lol. Anyhow I am referring to the edges of the belt that rides on the face of the fan and variator , not the teeth.

3
Agility 125 / I need a little info if someone can help . I need to know about some bolts
« on: May 31, 2013, 11:27:07 AM »
I found the little collars , (package protectors) as kymco calls them, but I still need the little heat resistant washers. I am trying to put my plastic cap back on the end of my muffler. It is a 2007 kymco agility 125. Anybody have any idea what material those are made of , or is there something else that I can go buy local. I know metal ones will melt my plastic. it is some sort of material that doesn't hold heat. it is almost like really hard felt. I have one but need 2 bolts and the 2 washers.

4
Agility 125 / Re: Help me out here guys, my agility 125 is clattering on the right side
« on: May 31, 2013, 11:23:43 AM »
Ok , I am gonna post what happened. it was the gear on the oil pump rattling behind the safety plate. Its is fixed and no damage done.

5
For Sale / Re: 2007 Kymco Exciting 250 4500miles w/busted crank, for sale or junk?
« on: September 18, 2011, 01:27:21 PM »
Dont know where you are from but check with  Josh at  The Scooter Garage in Mebane North carolina. He knows his stuff and seems very reasonable. Hes gonna do my agility 125 , stroker crank and bbk for around $1100. Tell him Justin With the agility 125 sent ya. Maybe he will give us both a discount lol !

6
For Sale / Re: For sale 2007 Grand Vista low miles
« on: September 18, 2011, 01:24:52 PM »
How bout pics you got any. What are you looking to get. PM me.

7
For Sale / Re: FOR SALE - 2011 Kymco Downtown 300 Burnt Orange
« on: September 18, 2011, 01:24:09 PM »
I know you payed alot for it but its gonna be a miracle if you get that out of it. Im not making enemys or trying to argue but the 500 are goin way cheaper on ebay

8
For Sale / Re: 2009 green Super 8 150 for sale in Madison, WI
« on: September 18, 2011, 01:22:41 PM »
Hello i am from galax Virginia. I am interested in your scooter maybe. Thats cool it reads in miles cause my kymco reads in kilo on the odo. What you asking for it.  send me a private message if you dont mind. Im on scoot dawg more than i am here and i dont check it much.

9
Technical | How To / Re: What about this ? Help me out here. super 8 150 engine on a agility 125
« on: September 16, 2011, 04:16:22 PM »
Here is what a rep from kymco says. It has the same mount as far as the engine mount but i would have to use the wheel size from the super 8 150. I just dont thnk i am gonna do this being i would have two diffrent wheels

10
Technical | How To / Re: What about this ? Help me out here. super 8 150 engine on a agility 125
« on: September 16, 2011, 10:59:46 AM »
ok so i dont get along with mario and wer dont reply to each other posts. Has anybody looked at replacement engines. They make the mounts pretty much the same as far as i can find. The motor mounts is never the issue its alwasy the length of the cvt and the wheel size the engine is made to work with. Im not trying to ask a question and then give an answer to it. I surely dont know for sure but i do know if a agility 125 engine can be made to work on a honda ruckus then i know i can make any engine work on mine. Thanks anyhow. I dont care for anybodys opinion who says a magnetic oil plug is useless!!

11
Agility 125 / Re: Who has the most Kilometers (miles)
« on: September 15, 2011, 03:55:01 PM »
17,500 no issues not even a belt yet. i am planning to replace the belt.

12
Agility 125 / Re: Aftermarket Forks
« on: September 15, 2011, 03:53:51 PM »
I dont undertand why guys have so much trouble out of there forks. My scoot is a 2007 and nevr leaked the first time and they are working just as they did day 1. I hope you can get some that will work for ya.

13
Agility 125 / Re: Dead Battery, Maybe
« on: September 15, 2011, 03:52:19 PM »
Yes you should be able to kick start it with a dead battery. This is once reason its there. Now your lights and evrything should work once running but it will be harder on your charging system running it with a dead battery.

14
Technical | How To / Re: What about this ? Help me out here.
« on: September 15, 2011, 03:44:45 PM »
Ah sh*$. Sorry i didnt put what i was riding. Yeah i know it wont fit my harley being it doesnt have a cvt at all. LOL. My scooter is a 2007 kymco agility 125.

15
Technical | How To / What about this ? Help me out here. super 8 150 engine on a agility 125
« on: September 14, 2011, 10:43:29 PM »
I have found a almost new super 8 150 engine. How could i tell if it would work. I tell ya it looks like it would from the pics but that doesnt mean sh^&. It is missing a cvt cover and i would have to use my variator and clutch plus my cvt cover. I swear it looks like my cvt cover would fit righton it . What do i need to measure to find out if it will fit? Does anybody know or has anybody done this swap.

Pages: [1] 2 3 ... 8