KymcoForum.com
Scooters - 50cc => People 50 => Topic started by: wordslinger on June 20, 2010, 01:11:37 AM
-
..ppl will idle fine...
..when i squeeze either brake lever, or press the "passing" headlamp switch, idle increases, and will continue to increase until i release whatever it is i'm squeezing or pressing...
..rpms will not increase unless i am holding either brake lever or the headlamp switch..
..i can rev the hell outta it as long as i'm doing that...
..what the f*ck!!!!!!!!!!!!!!!!!!!!!!!
-
You got me they usually tend to do the opposite on the break pull,lights should have no effect or a drain at best,some more connections to clean?
-
...added note, the headlamp or tail-lamp will not burn at idle...
..squeezing a lever, brake lamp burns..
..press the "passing" button..headlamp burns..
..and in both cases, idle increases...
..i think my carb's just fine...
-
Your still going to want to take a look at it,the electrical stuff is kinda wierd,to effect the idle.Lotta juice being drwn somewhere
-
...i dunno...runs great as long as i hold the brake!!...lol..
-
HUMMMMMMMMM--- YOU HIT THE BRAKES/FTP AND MORE CURRENT FLOWS
-
...orrr..with the tail-lamp and headlamp not burning at idle, current is being reduced, due to a faulty component...
..rectifier???
...i'm studying the schematic, but have yet to figure it out...
-
This wouldn't be caused by a bad earth connection would it?
-
This wouldn't be caused by a bad earth connection would it?
You mean system ground not earth ground, correct? ;)
-
Yes, sorry.
-
DO THE VOLTAGE INCREASE WHEN YOU HIT THE BRAKES
-
..haven't had time to check anything today...
..slept late, then my girls took me out on th' town...
..then we came back home and watched Kick Ass...
..been a good day.....
;D
-
..figured it out...
..the flasher relay had rubbed into a pink wire that goes to the bottom of a component that i'm not familiar with...
..looks like an H with the left leg taller....has a green wire on the bottom of the left leg..
...headlamp and tail-lamps still don't work, but the weird idle problem is gone...
-
Check the filiments they can blow easy,who needs lights anyway!
-
..the headlamp burns if i depress the "passing" button...
..tail-lamp burns bright when i squeeze the brake levers...
-
I think that component may be the resistors. Are there two one bigger than the other each with one wire coming out of a silver rectangular box? Really just a guess, but I think my resistors had one with a green wire and the other pink. Are they located under the front fairing by the voltage regulator?
-
...yup..that's them...and i figured out my head and tail lamps...
..imma ride th' ppl to work tomorrow...
..just got back from a kick-ass ride...
..i love this scoot...
-
Ha! Me too!Can't wait to see what you do with it.I know It's just a back up. ;D
-
...it's a back-up right now....
..future project....when i learn what i'm doin'....
;D