« previous next »
Pages: [1]

Author Topic: ..please help!!..  (Read 2744 times)

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
..please help!!..
« on: May 26, 2010, 08:53:30 PM »
...i'm trying to find a larger diameter variator for my A50...

..my Malossi multivar is roughly 3.52 inches, or 90mm...

..i notice that the variator for the S9 is the same as the cobra, people50, dink and a few others..all two-strokes..

..what i would ask is, that the next time any of you guys are in your cvt, could you measure the outer diameter of your variator and the diameters of your output shaft and drive boss??

..i think that these two stroke variators might have larger diameter variators, and if the shaft size is the same as mine, i could make it work for me...


peace
Logged
..every mod (action) necessitates a (reaction) mod..

Shaka

  • Hero Member
  • *****
  • Posts: 1660
    • View Profile
Re: ..please help!!..
« Reply #1 on: May 27, 2010, 04:42:56 AM »
My ZX50 oem variator is 88mm across the face. 

The drive boss is 20mm OD, 14mm ID, 38.5mm length.
Logged

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: ..please help!!..
« Reply #2 on: May 27, 2010, 07:44:05 AM »
M Dr. Pulley sliders (6 gram) turned up today, so when I put them in I will measure my variator. The boss wouldn't really matter, you could get it machined to suit if needed. :)
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..please help!!..
« Reply #3 on: May 27, 2010, 09:46:36 AM »
..the boss would matter if it's I.D is too big for my scoot's output shaft...
Logged
..every mod (action) necessitates a (reaction) mod..

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: ..please help!!..
« Reply #4 on: May 27, 2010, 09:52:34 AM »
If you use your boss you could machine it down to suit if it is a larger o.d.
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..please help!!..
« Reply #5 on: May 27, 2010, 09:54:40 AM »
..not if it's O.D. is smaller than the I.D. of the variator...
Logged
..every mod (action) necessitates a (reaction) mod..

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: ..please help!!..
« Reply #6 on: May 27, 2010, 09:57:58 AM »
Could always get one made, may be worth the one off cost.
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

sidthesloth

  • Hero Member
  • *****
  • Posts: 2313
  • Kymco ZX50
    • View Profile
Re: ..please help!!..
« Reply #7 on: May 30, 2010, 03:48:57 AM »
Forgot to measure it yesterday so pulled it apart again and measured it this morning
Variator O.D 89mm

COLLAR
 
Length:- 36.9mm

O.D.   :- 20mm

I.D.    :- 14mm
Logged
ZX50, 47mm cyl. kit, TZR50 CDI. Michelin Pilot Sport tyres,
Next performance mod; pumping the tyres up.

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..please help!!..
« Reply #8 on: May 30, 2010, 03:52:53 AM »
...dude...........thanx..............
Logged
..every mod (action) necessitates a (reaction) mod..

wordslinger

  • Hero Member
  • *****
  • Posts: 10766
  • undead primate
    • View Profile
Re: ..please help!!..
« Reply #9 on: May 30, 2010, 04:05:23 AM »
Variator O.D 89mm  MALOSSI MEASURED AT 90MM


COLLAR
 
Length:- 36.9mm.....MALOSSI @ 37.4

O.D.   :- 20mm.......mALOSSI @ 19.95

I.D.    :- 14mm......MALOSSI @ 13.8


..STOCK a50 COLLAR LENGTH IS 38.5mm
Logged
..every mod (action) necessitates a (reaction) mod..

zombie

  • You never know do ya!
  • Hero Member
  • *****
  • Posts: 13870
  • Close enough to get the idea!
    • View Profile
Re: ..please help!!..
« Reply #10 on: May 31, 2010, 04:17:21 AM »
Hey Slinger I lost track of the post w/ the belt size. I have compared the oem #'s and they are different. The searching I have done give me #'s taht are every where from 739-752mm for the same belt. That may be why so many others have blown belts that are claimed to be correct. I had the same trouble when i installed the Malossi Var before doing the clutch. I would suggest getting the full kit deal, and the belt that matches. It seems the most reliable way. I will look more tomorrow
Logged
"They have nothing in their whole imperial arsenal that can break the spirit of one Irishman who doesn't want to be broken."   Bobby Sands...

An Error Has Occurred!

Call to undefined function split()
Back