KymcoForum.com

Scooters - 125 to 300 => Agility 125 => Topic started by: Vision on May 01, 2016, 01:52:10 AM

Title: Wash the Bike Like This?
Post by: Vision on May 01, 2016, 01:52:10 AM
This doesn't seem like a good idea...am I wrong?

https://www.youtube.com/watch?v=tsCsaeqMNnA (https://www.youtube.com/watch?v=tsCsaeqMNnA)
Title: Re: Wash the Bike Like This?
Post by: MrXT on May 01, 2016, 06:00:21 AM
You never wash a motorcycle with a jetwasher. On a scooter you can probably get away with just foaming cleaning the plastics and seat and then rinsing it off with a normal hose pipe but that idiot sprays everywhere with both cleaning foam and jetwashing even the air intake and under the seat. You dont do that under the hood of a car so why would anyone think its a good idea to do this under the hood of a bike.
Title: Re: Wash the Bike Like This?
Post by: Aceforever on May 12, 2016, 05:10:21 AM
Or you can be like me. Let nature take its course and allow the rain to wash it once in a blue moon...I wake up in the morning and nice clean lol

Thank you rain :)
Title: Re: Wash the Bike Like This?
Post by: Mr. Paul on May 20, 2016, 07:50:21 PM
NOT SMART  :(
Title: Re: Wash the Bike Like This?
Post by: AMAC1680 on May 20, 2016, 09:21:12 PM
I wouldn't do it.
That said it appears he has done it before and drove away after. Kudos to the Agilty.

AMAC
Title: Re: Wash the Bike Like This?
Post by: imaginetheory on September 01, 2016, 10:01:01 AM
This is how I wash my bikes.

https://www.youtube.com/watch?v=B2IqF0ciHHU (https://www.youtube.com/watch?v=B2IqF0ciHHU)
Title: Re: Wash the Bike Like This?
Post by: 1g0g on September 01, 2016, 03:26:52 PM
This is how I wash my bikes.

 ;D ;D
Title: Re: Wash the Bike Like This?
Post by: Tromper on September 01, 2016, 06:08:13 PM
I'd go with Mr. XT on this one.
Foam and low pressure hose.  Sure, just don't spray the engine or air cleaner, & go easy on the wheels.

I have used a wheel cleaner at those on a few bikes.  Basically the same as at home with the canned stuff and a hose..
Those run very low pressure since you don't want to force water & cleaner into bearings and the like.

High pressure.  No.